The VX-R70 - Utilizing Scorpion's advanced TCT Composite shell construction and a dual-density EPS system has created a lightweight, feature-rich performance MX helmet that refuses to compromise. Details include titanium D-Rings, a tool-less quick-change chin vent system, EXOLON shatter-resistant Aero-Tuned Visor, and a large goggle eyeport. Not to mention ScorpionEXO(r) standards: KwikWick(r) II liner for extreme moisture control, AirFit(r) cheekpad system for a custom snug fit, and Aero-Tuned Ventilation for maximum breathability. The VX-R70 has been engineered, tested and built to meet the elevated demands of the serious off road rider.
TCT Composite Shell: Developed exclusively by Scorpion, the revolutionary TCT(r) (Thermodynamic Composite Technology) process consists of a proprietary five-layer blend of interlaced and specially formulated fiberglass, Aramid and organic poly-resin fibers.
Advanced Dual-Density EPS: Advanced multi-layer EPS provides efficient energy displacement in key areas. EPS liner throughout entire chin bar.
KwikWick II(r) Liner Fabric: KwikWick II(r) anti-microbial fabric keeps you cool and dry in warm weather, warm in cool weather. Liner is easily removable and washable.
Aero-Tuned Ventilation: Three intake ports across the eyebrow force cool air in while four exhaust vents maximize movement of hot air out. Five intake ports on the chin bar maximize fresh air.
AirFit(r) Liner Inflation System: Inflatable cheek pad system for superior personalized fit.
Large Goggle Eyeport: Accommodates most brands of goggles and sizes. Features a soft pliable rubber roost guard.
EXOLON Shatter-Resistant Aero-Tuned Visor: Designed to block blinding sun and oncoming roost. Scorpion's advanced polymer technology visor is shatter resistant and pliable.
Quick-Change Chin Vent: Replaceable when damaged or easily removed for quick, tool-less cleaning.
Titanium Double D-ring: High-strength titanium D-ring system with industry-leading durability.
Detachable Chin Strap Cover: Easy to remove with a single snap for your washing convenience.
Meets or exceeds ECE 22.05 / DOT safety standards.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
A: The VX-R70 falls under an intermediate oval head shape shell.
1-1 of 1
SCORPION HELMETSADULT HELMETS
20.9 - 21.3in (53.1 - 54.1cm)
6-5/8 - 6-3/4
21.7 - 22in (55.1 - 55.9cm)
6-7/8 - 7
22.4 - 22.8in (56.9 - 57.9cm)
7-1/8 - 7-1/4
23.2 - 23.6in (58.9 - 59.9cm)
7-3/8 - 7-1/2
24 - 24.4in (61.0 - 62.0cm)
7-5/8 - 7-3/4
24.8 - 25.2in (63.0 - 64.0cm)
7-7/8 - 8
25.6 - 26in (65.0 - 66.0cm)
18.9 - 19.3in (48.0 - 49.0cm)
19.8 - 20.2in (50.3 - 51.3cm)
20.5 - 20.9in (52.1 - 53.1cm)
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.