Searching for outstanding value in an off-road helmet? Look no further than the new VX-35. Beyond pure great looks and cutting-edge style, the VX-35 boasts a long list of features to impress any top off-road racer - and at a price any rider can afford. Its stylish ECE / DOT certified shell keeps the weight low while a dual EPS liner adds impact protection. An AirFit cheek pad system allows a perfect fit while Scorpion's time-proven KwikWick II liner wicks away moisture for pure comfort during every ride.
Premium Polycarbonate Shell - Developed exclusively by Scorpion, their industry-leading polycarbonate shell is engineered to be lightweight, strong and maximize impact displacement.
Dual-Density EPS - Advanced multi-layer EPS provides superior energy displacement.
KwikWick II Liner Fabric - KwikWick II anti-microbial fabric keeps you cool and dry in warm weather, and warm in cool weather. The liner is easily removable and washable.
Aero-Tuned Ventilation - Three intake ports across the eyebrow and one large scoop on top force unwanted hot air out the four rear exhaust ports. Five intake ports on the chin bar maximize fresh air.
AirFit Liner Inflation System - Inflatable cheek pad system for superior personalized fit.
Goggle Eyeport - Accommodates most sizes and brands of goggles. Features a soft, pliable rubber roost guard.
Aero-Tuned Visor - Aerodynamic design to allow free flowing air through the visor while still blocking the intense sun from above. The peak extender is included to help protect from mud and sun during extreme rides.
Quick-Change Chin Vent - Easily removed for quick, tool-less cleaning.
ECE 22.05 / DOT-218 Approved.
Five Year Warranty.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.