The EXO-R710 is Scorpion's latest edition to the popular R-Series with a feature list that is unparalleled in the sub-$200 fiberglass helmet category. Advanced features like the fiberglass / Aramid matrix shell, Ellip-Tec base plate system, Everclear no-fog face shield and emergency release cheek pads allow the EXO-R710 to be at home in the canyons, while commuting or during closed course competition.
Fiberglass / Aramid Matrix Shell: A proprietary blend of interlaced fiberglass and Aramid fibers.
Three Shell Sizes: Having three shell sizes helps to optimize weight, fit and comfort across the entire size range of XS - 2XL.
Advanced Dual-Density EPS: A multi-layer EPS provides efficient energy displacement in key areas including EPS lining throughout the entire chin bar.
Everclear No Fog Face Shield: Optically-clear shield with state-of-the art fog-free technology, anti-scratch hardened coating and 100% UV protection.
Ellip-Tec Base Plate: Scorpion's ratchet system uses an elliptical motion that creates 7.6 mm of travel which pulls the shield securely against the eyeport, ensuring a proper seal. The Ellip-Tec ratchet system allows for 100% tool-less shield changing in a matter of seconds.
KwikWick II Liner Material: The second generation of Scorpion's moisture-wicking lining material feels soft to the touch and incorporates anti-microbial and hypo-allergenic properties. Easily removable and washable.
KwikFit Cheek Pads: KwikFit cheekpads allow easy on and off of the most common styles of eye glasses.
Emergency Release System: Tabs located under the neck roll allow easy removal of the cheek pads by trained emergency medical personnel.
Aero-Tuned Ventilation System: Four intake ports across the front of the helmet force cool air into the helmet interior while three exhaust vents maximize movement of hot air out of the helmet.
Communication System Speaker Pockets.
Double D-ring Chin Strap.
Meets or Exceeds: SNELL M2015 / DOT-218.
Five year warranty.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.