The EXO-R2000 is Scorpion's flagship performance race helmet. Built with Scorpion's exclusive TCT composite shell construction, the lightweight EXO-R2000 was developed by Scorpion engineers with input from MotoGP riders and tested on the track as well as in the lab. Scorpion's exclusive Ellip-Tec ratchet technology ensures a tight seal around the shield while the advanced aero-tuned ventilation system produces generous airflow and circulation throughout the helmet. The aerodynamically designed tear-drop shell shape minimizes buffeting at high speeds and the AirFit cheekpad system ensures a custom snug fit. The EXO-R2000 comes equipped with Emergency Release cheek pads, a standard EverClear shield PLUS a bonus Dark Smoke EverClear shield. Pinlock MaxVision-ready flat shields with tear-off posts are available as an accessory for the track (sold separately). Scorpion's DNA is infused into every facet of the EXO-R2000 and the result is a new benchmark for quality and value in a premium helmet.
TCT Composite Shell: Developed exclusively by Scorpion, the revolutionary TCT (Thermodynamic Composite Technology) process consists of a proprietary five-layer blend of interlaced and specially formulated fiberglass, Aramid and organic poly-resin fibers.
Four Shell Sizes: To optimize weight, fitment, and comfort. The R2000 is built with four shell sizes and six EPS liners. Providing you a true MotoGP developed race helmet.
EverClear No Fog Faceshield: Optically-clear shield with state-of-the art fog-free technology. Anti-scratch hardened coating. 100% UV protection.
Pinlock 100% Max Vision: Pinlock 100% Max Vision ensures a 100% fog-free vision. The anti-fog insert lens is placed in the ScorpionEXO 2D flat race shield with tear-off posts, providing maximum visibility (optional accessory, sold separately).
AirFit Liner Inflation System: Inflatable cheek pad system for superior personalized fit.
KwikWick II Liner Fabric: KwikWick II anti-microbial fabric keeps you cool and dry in warm weather, warm in cool weather. Liner is easily removable and washable.
KwikFit: KwikFit cheekpads allow easy on and off of the most common styles of eye glasses.
Quiet Neck Roll: Designed to reduce noise and excess wind within the helmet.
Ellip-Tec Ratchet System: Easy, secure, tool-less faceshield changes in seconds. Pulls the shield back against the eyeport gasket during closing to ensure a proper seal.
Aero-Tuned Ventilation: Six intake ports across the front of helmet force cool air in while ten exhaust vents maximize movement of hot air out.
Faceshield Lock / Vent System: Securely locks shield in place or turn down the lever to allow light airflow into the helmet.
Emergency Release System: Tabs located under the neck roll allow easy removal of the cheek pads by trained emergency medical personnel.
Titanium Double-D Ring: High-strength titanium D-ring system with industry-leading durability.
Meets or Exceeds: SNELL M2015, DOT 218.
Note: Ships with one Clear and one Dark shield, all other hues sold separately.
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.