LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENCED FOR USE, UPON A HIGHWAY. OUTSIDE OF CALIFORNIA, CHECK LOCAL AND STATE EMISSIONS REGULATIONS FOR COMPLIANCE.
Building a custom tank for your fuel-injected Harley? Wondering how to cram all that fuel injection equipment into the tank? With the RSD Gas-It Kit, your stock HD fuel injection parts are removed and relocated inside the tank, allowing a clean, uncluttered tank face, while maintaining the fuel injection most everyone loves so much.
Relocates O.E.M. 2001 - 2007 Delphi fuel pump, fuel pressure regulator, fuel filter and fuel level sending unit to the underside of your custom tank.
A smooth and reliable way to hide all fuel injection components.
Includes billet machined steel weld-in plate, 3.75" x 8" aluminum manifold.
Same kit that is included with RSD Fuel Injected Gas Tank Kit (sold separately).
Note: Requires vented tank or vented gas cap.
Important Installation Notes:
Custom fabrication and welding required. Your custom tank's bottom must be relatively flat to accommodate part installation.
Not legal for sale or use on pollution controlled vehicles.
2008 - 2011 models require use of 2001 - 2007 O.E.M. Delphi Fuel Injection Components.
Gas-it Kit uses existing fuel pump components from your fuel-injected Softail.
If starting from scratch, you must purchase all of the following components from your local HD dealer for 2001 - 2011 Delphi systems:
HD Part 27408-01 - Fuel pressure regulator.
HD Part 61001-01 - Fuel filter kit, includes clamps, O-ring and hose.
HD Part 75300-05 - Fuel sender kit.
HD Part 62897-01B - Pump assembly.
HD Part 62357-00 - Fuel hose, fuel pump to filter.
HD Part 10222 - Fuel hose clamps.
HD Part 72439-00B - Connector assembly kit with connector kit.
HD Part 62900-01B - Fuel line, tank to intake.
HD Part 62189-01A - Check valve assembly with O-ring.