Ride Engineering's newest product is a suspension link to lower the back of the motorcycle 10 mm to help balance out the bike. This improves handling and keeps the bike going straight in whoops allowing the rider to be much more aggressive. It also keeps the back end planted in braking bumps.
Comes complete with bearings and seals.
Recommended sag with the Ride Engineering Link is 106 - 108 mm.
Note: If, after installation, the rear suspension feels a bit firm, Ride Engineering recommends opening the high speed compression in quarter turn increments and/or rebound two turns at a time until you achieve the desired results.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
A: The two stock seals around the shock mounting point have to be used. They are not pressed in so they are easy to disassemble and reassemble onto the ride unit. All the stock bushings must be also be inserted into the Ride Engineering Linkage link as well.