I bought this for my Honda trx300ex due to it being 2 mm bigger than stock and actually was cheaper than buying the stock tie rods. Once they came in. The install was quite simple. I had all the parts needed for a full install. When I got them installed and aligned the wheeler, I was asked if I was really done. I would say it took me half hour tops to get the old tie rods off and get the new ones in.
QuadBoss Tie Rod Assembly Upgrade Kit
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
I bought the to replace the tie rods on my wife's kfx 700 because the oem ones are, well, not good. These are 2mm bigger and cheaper than oem. They were a bit of a hassle to install since no instructions were provided but as long as you put them on the same way the others came of you will be fine. Note though, that LH (left hand) and RH (right hand) refer to the threads, not the side of the fourwheeler they need to be installed on. Each side will have a lh and rh threaded nut on it.
There have been no questions asked about the QuadBoss Tie Rod Assembly Upgrade Kit.