PC Racing Flo Stainless Steel Oil Filter

$29.99
4.80 out of 5 stars
Fitment Expert:
Dirt Bike Dirt Bike ATV Make Year Model
 
PC Racing Flo Stainless Steel Oil Filter
PC Racing Flo Stainless Steel Oil Filter
  • Description
  • Reviews (29)
  • Q&A (9)
  • Fitment

This should be the last oil filter you will ever buy!

Superior Filtration:

  • Made from laser-cut, medical-grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases.
  • The stainless filter catches items down to 35 microns, which is about three times better than most good paper or brass filters.
  • Unlike glued paper filters, the FLO Oil Filter pleat seam is welded and able to withstand up to 600 degrees (F).

Consistent flow under all conditions:

  • This filter maintains consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine!

This high tech filter technology is widely used in all types of auto racing including NASCAR, Indy-type cars, Formula 1 and in the aerospace industry where filtration is of the utmost importance.

In addition to all the other benefits, this filter helps keep the landfills free of old used filters!

4.8 out of 5 stars (29)
4.8 out of 5 stars
5 star   25
4 star   3
3 star 0
2 star 0
1 star   1
See Terms and Conditions
1-10 of 29
Overall 1 out of 5 stars
Verified Purchaser
FastRider
Does not fit properly

I bought this filter for a 2007 YZ 250F and even though YZ 250 F 98-12 is included on the label it will not fit. The OEM filter has more recess on the side facing in towards the motor which allows the cover to go on all the way and seal. With PC filter the spacing is off by a quarter inch or more.

Overall 5 out of 5 stars
Top 500 Contributor Verified Purchaser Top 250 Contributor
Location: New Wilmington, PA
Clark58
PC Oil Filter

Fits good, easy to install.

Overall 4 out of 5 stars
Location: San Benito, TX, USA
Garrett
Works Well

I've used this filter on my 07 CRF250R for about half a season and just bought a new one for my 15 CRF250R. Definitely makes oil changes easier and less expensive. I can make sure my filter is fresh at every oil change. I'm still not sure if this filter can catch the extremely small particles that a paper filter can though. Also the rubber o-ring on it doesn't seem to fit snug on the filter cover like the OEM paper filters do. Overall I would recommend this for more casual riders, not so much for a hardcore racer.

Overall 5 out of 5 stars
Verified Purchaser
Location: Houston, TX, USA
YoungGun
Works Flawless!

Filter fit perfect and now no more changing every ride just pop it out hit with some cleaner and compressed air and youre done!

Overall 5 out of 5 stars
Top 500 Contributor Top 1000 Contributor Verified Purchaser MotoSport Staff
Location: Portland, OR, USA
Savery1
Great product

For anyone second guessing running the stainless steel oil filters worry no longer. I have been running one now for 7 years now on the same motor with no issues, the only reason I am replacing it is becasue the glue that holds it together has just started to give way. This has been a great product for my CRF450X and would recomend it to anyone.

Overall 5 out of 5 stars
Top 500 Contributor Top 1000 Contributor Verified Purchaser
Location: Mustang, OK, USA
Winters
Great Protection

I have used this filter for a whole season and no concerns or break down in product. Looks as good as day I got it from motosport. Just clean properly and blow clean from inside to out with air nozzle. Does not need alot of CFM just a little to make sure filter is dry and free of debris. You can also just clean and let air dry. Great product and great company.

Overall 5 out of 5 stars
Verified Purchaser
Location: Chula Vista, CA, USA
Chris
PC Racing Flo Stainless Steel Oil Filter

Considering a new oil filter costs around $10, this is an obvious choice, especially if you ride 3-4 days a week. Offers the same, if not better filtration.

Overall 5 out of 5 stars
Top 1000 Contributor
Matt
Great Product

It fits great, durable and easy to clean.

Overall 5 out of 5 stars
Top 1000 Contributor
Location: Phoenix, AZ, USA
Trini250
No more paper!

Never paying for a filter again, can't beat that. Once I installed it I saw what all the hype was about. Don't need any harsh chemicals, just a cup of warm water mixed with a little dawn does the trick.

PC Racing Flo Stainless Steel Oil Filter
Overall 5 out of 5 stars
Verified Purchaser
Location: San Dimas,CA
DumontRider
PC Racing Flo oil filter.

I have used this product on my quad and XR600R and they always fit and work like they are supposed to.

1-10 of 29
Total Questions (9)
Questions with answers:
  9
Questions without answers:
0
saltykawi3 Location: Duvall, WA 98019, USA
1-9 of 9
Riggatony 9 days 13 hours ago
Ktm 525xc has two filters, does that mean when i order it will come with both?
Expert MotoSport Staff
7 days 21 hours ago
MotoSportExpert
No, the PC Racing Flo Stainless Steel Oil Filters are sold individually. Once your ride has been selected the drop down will let you choose the short or tall filter. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order. http://www.pcracingusa.com/KTM-Front-Polaris-Husaberg-Off-Road-PC155-Drop-in-Flo-Oil-_p_45.html PC155 - Stainless Steel, Reusable Oil Filter KTM Front, Tall Filter 400/450/520/525 EXC-F 00-07 400/450/520/525 XC-F 00-07 400/450/520/525 SX-F 00-06 540/620/625/640/LC4 (92-07) 690 all - 08 KTM 450/525 XC ATV 08-09 KTM 250 SX-F 05-12 250 XC-F/ XCF-W 07-12 (single filter engines) 450 EXC/ XC-W (12-15), 450 SX-F F.E. (12-15), 450 SX-F (13-15), 500 EXC/XC-W (12-15) Polaris Outlaw 450/525 07-12 Husaberg All 4-Stoke Models 95-12 Husqvarna FC450/FC501 (14-15) http://www.pcracingusa.com/KTM-Rear-Polaris-Husaberg-Off-Road-PC157-Drop-in-Flo-Oil_p_46.html PC157 - Stainless Steel, Reusable Oil Filter KTM Rear, Short Filter 400/450/520/525 EXC-F 00-07 400/450/520/525 XC-F 00-07 400/450/520/525 SX-F 00-06 690 all (08) KTM 450/525 XC ATV 08-09 Polaris Outlaw 450/525 07-12 Husaberg All 4-Stoke Models 95-09
Hondarider 12 days ago
Would it fit a 2009 crf150rb?
MotoSport Staff Expert
10 days 20 hours ago
MotoSportExpert
Yes. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct filter for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Monster54 23 days ago
Would this filter work on a 2001 ktm 400 mxc?
Expert MotoSport Staff
22 days ago
MotoSportExpert
Yes the PC Racing Flo Stainless Steel Oil Filter Fits your 2001 KTM 400MXC. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct filter for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
saltykawi3 1 year 4 months ago Location: Duvall, WA 98019, USA
How often does it need to be cleaned?
Every oil change? Every-other oil change? I usually change the oil every 3 to 5 rides.
MotoSport Staff Expert
1 year 4 months ago Location: Portland, OR, USA
MotoSportRyanT
It is best to clean the filter whenever you change the oil.
1 year ago Location: Houston, TX, USA
YoungGun
I always clean mine after every ride. The more you clean the better the bike runs and lasts, but every other ride is sufficient as well. If you dont ride it hard you could probably get away with 3-5 rides
John 1 year 6 months ago
Does this fit?
I'm wondering if this fits a 2003 Yamaha YZ250F. Reason why I ask is because it doesent look the same as my old one. The piece of rubber on the top in the picture looks smaller around and thicker that my last.
MotoSport Staff Expert
1 year 6 months ago Location: Portland, OR, USA
MotoSportRyanT
Yes, This PC Racing Flo Stainless Steel Oil Filter is made to fit your '03 Yamaha YZ250F. The image on the website is a generic picture of a PC Racing Flo Stainless Steel Oil Filter and may not be displaying the exact filter for your bike. Just be sure to correctly identify your Year/Make/Model as the ride you are shopping for before placing your order so we can send you the specific filter for your bike.
me203 Over 5 years ago
Filtration?
Do they filter as good as the K&N paper filters? Is it okay to clean them in Varsol?
MotoSport Staff
Over 5 years ago Location: P+RTLAND
Drewski
Yes, they filter just as good as a standard paper filter. Any solvent or degreasing agent will work fine for cleaning.
Dragonfly391 Over 5 years ago
Would the CRF450 oil filter fit the CRF450X?
2006 CRF450 oil filter fit 2006 CRF450X?
MotoSport Staff Expert
Over 5 years ago
hondarob
they are the same filter for both bikes
Yzfspode292 Over 5 years ago
Would anyone consider using a reusuable filter (like this one) for the average weekend warrior/motocross race bike?
Top 500 Contributor
Over 5 years ago Location: massachusetts
motopro
i used to use them, it would be the first thing i bought every time. i just recently bought a 125 so i dont use these anymore but i swear buy them. you can pull them out and clean them in between motos.
Top 500 Contributor Top 1000 Contributor
Over 5 years ago
07crf250r
i would definitely consider using a reusable filter. you will end up saving a lot of money in the long run, and they work great
2 years ago Location: Tennessee
Crash
Yes it would work jus fine.
Yzfspode292 Over 5 years ago
How do you clean these reusable fliters? How long do they last?
Over 5 years ago Location: Burlington, WI
jaker24
I clean it using the solvent in my parts washer, and blowing it out with compressed air after cleaning. I've been using the same filter in my last 3 CRF450's, so 4 years and counting on the same filter.
Over 5 years ago Location: FT LEWIS, WA
R6GUY
these will last the life of the bike, the internal filters are metal so they will not tear down with normal oil changing
Top 25 Contributor Top 50 Contributor
Over 5 years ago Location: chicago, il
NjGmotoX
You clean them with a chemical solvent like gas or kerosene. it will last as long as you have your bike for sure, they dont wear out.
Over 5 years ago Location: quanah tx
rebchris79
You clean them with a light solivent and let dry before reinstilation and will last a long time if you do not use heavy chem to clean them
1-9 of 9