PC Racing Flo Oil Filter

$129.99
$108.99 (16% off)
5.00 out of 5 stars
Fitment Expert:
Sportbike Sportbike Cruiser Make Year Model
 
PC Racing Flo Oil Filter
PC Racing Flo Oil Filter
  • Description
  • Reviews (13)
  • Q&A (3)
  • Fitment

PC Racing's FLO Oil Filter is the last oil filter you will ever buy! Made from laser-cut, medical-grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. The stainless filter catches items down to 35 microns, which is about 3 times better than most good paper or brass filters. Unlike glued paper filters, the FLO Oil Filter pleat seam is welded and able to withstand up to 600 degrees (F).

The FLO Oil Filter maintains consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine!

This filter technology is widely used in all types of auto racing including NASCAR, Indy type cars, Formula 1 and in the Aerospace industry where filtration is of the utmost importance. In addition to all the other benefits, the FLO Oil Filter helps keep land fills free of old used filters.

  • Super-strength magnet installed for magnetic pre-filtering.
  • Superior filtration, 35 microns!
  • Proven Aerospace, NASCAR, Indy, and Formula 1 technology.
  • Unaffected by water, heat, or pressure.
  • Easy filter element inspection.
  • High flow rate.
  • Environmentally friendly.
  • Washable and reusable.
  • Pays for itself.
5.0 out of 5 stars (13)
5.0 out of 5 stars
5 star   13
4 star 0
3 star 0
2 star 0
1 star 0
See Terms and Conditions
1-10 of 13
Overall 5 out of 5 stars
Verified Purchaser
Location: Valencia, California
Stumpy
Solid filter

I was a little worried about the quality before I ordered but that was unwarranted. The filter Arrived and it is solid and a piece of art. It fit My 2012 vstrom perfectly.

Overall 5 out of 5 stars
Verified Purchaser
Location: Apex North Carolina
Unclefun
P C Flo filter

Do the math people, this is the only way to fly if you are in to any kind of regular maintenance. Looks great, works great. The hundred dollars is well worth it for the last filter you will buy!

Overall 5 out of 5 stars
Verified Purchaser
cabrown
Worth every penny!

Just changed my oil for the first time since I put this thing on. I was impressed when I received it and am even more so now. It does everything they say, cleans up nice and easy and with my regular oil filters costing over 10 bucks each it will pay for itself fairly quickly.

Overall 5 out of 5 stars
Verified Purchaser
Location: Savannah, GA, USA
ninja6
Pc racing flo oil filter

the pc racing flo oil filter is an awesome looking oil filter the outter housing is show quality and the removeable stainless micronic cloth is very easy to clean great product last filter you will ever buy

Overall 5 out of 5 stars
Featured
Location: Rogers, Arkansas
Netplayn
Say good bye to other filters

Outstanding value, great looks and eliminates the need for replacement paper oil filters... forever!! Not only is this a great looking filter setup it's incredibly functional with a lifetime reusable metal filter element with integrated magnet. Comes with extra seal ring a couple of stickers.

PC Racing Flo Oil Filter
Overall 5 out of 5 stars
Location: Minnesota
LoneRanger068
Love it!

I read a ton of reviews on-line before investing in this filter... everything I read was positive, and with my goal to be changing my oil more often, saving the $15+ cost of a filter every would definitely be less crunch out of my wallet! Plus, the magnet helps filter out metal, plus you can SEE potential issues with your gears BEFORE a breakdown, plus it's a solid piece of art that looks AWESOME on a bike (you can never have too much chrome!). While you won't need an oil filter wrench once you install this baby, I needed to buy one for a 1 time use (ugh). Installation was a snap, the bolt/nut affixed to the front is way easier than the oil filter wrench! So I'm on my first oil change with it, I'll report back later if anything changed, but if it works half as a good as it looks, I'm a happy camper (and these sell for over $108 on other web sites!)

Overall 5 out of 5 stars
Location: Davenport, IA
LLLouie
Great Fit

Fit perfectly on my wires fz6r and has performed well so far, can't comment on the long term use, but it sure beats paying 13 bucks for a new decent KN filter each time I feel like getting my hands dirty.

Overall 5 out of 5 stars
Location: placentia, ca
motomaniac1788
Bitchin'

This thing is RAD. Buy this and you won't need any more filters. It's easy to clean, and most importantly it looks cool.

Overall 5 out of 5 stars
Atown

Filter is great and looks amazing. Great investment for your bike.

Overall 5 out of 5 stars
Location: Las Cruces, NM
BobAz
FLO Oil Filter

Ordered the oil filter received it, installed it. Ran my bike for the next couple of months, changed the oil - the cover's built in nut made it super easy to remove the filter - big plus because I did not have to remove my fiberglass (ninja zrx9 f1) to get to it, saves time. Plus the look of the cover in my opinion looks cool against the led lights I have on my bike. As for cleaning of the element well that was pretty simple too,... it also allows me to inspect what it is filtering (it was clean :D ) .... considering I will have this bike for sometime to come, it was worth my investment. ..

1-10 of 13
Total Questions (3)
Questions with answers:
  3
Questions without answers:
0
Length?...
Fonz
1-3 of 3
Fonz 1 year 11 months ago
Length?
What is the length of this filter? I have clearance issues with the M1-110 so i started using the M1-MC134 which fits perfect
MotoSport Staff
1 year 11 months ago Location: Portland, OR, USA
MotoSportExpert
These are designed to be model specific fitment. Unfortunately i do not have the specifications available for each filter. If you enter the bike model that the filter is for, you will receive the correct filter for that application.
lehtdog Over 5 years ago Location: washington D.C
Whats the best degreasing agent, that would be good to use on the filter?
would any of the degreasing agents be harmful to the motor or bike
MotoSport Staff
Over 5 years ago Location: P+RTLAND
Drewski
Any solvent will work whether it's kerosene, contact/brake cleaner, degreaser agent or even dish soap and water. Just dont use gas.
2 years 4 months ago Location: Savannah, GA, USA
ninja6
use any spray carb cleaner or mineral sprits these should not harm the engine but you should blow out any exess or let it evaporate it self dry
wise Over 5 years ago
So all i do is wash it every oil change and put it back in my bike and is there any warrenty?
MotoSport Staff Expert
Over 5 years ago Location: Portland, OR
patrick77
Clean with any degreasing agent, dry, lightly blow air through the filter from the inside out to remove any remaining particles or cleaning agent and reuse. No warranty.
1-3 of 3