Free 3-Day Express Shipping on Orders Over $99*

Shopping for Parts? Select Your Bike: Manage Saved Bikes Manage Saved Bikes Sportbike Dirt Bike Sport ATV Utility ATV Sportbike Cruiser Make Year Model

Shop by bike...

bike:

Applied Refinements

  • Price: $10 - $14.99

Refine results by...

Percent Discount:

Most Recent Tire Tools Reviews

BikeMaster 2-Piece Tire Mounting Rim Protector BikeMaster 2-Piece Tire Mounting Rim Protector BikeMaster 2-Piece Tire Mounting Rim Protector Huck369 (Somerset, KY) A great addition to any tool box"Definitely a "Must Have" if you mount your own tires, especially on aluminum Mag Street ...""Definitely a "Must Have" if you mount your own tires, especially on aluminum Mag Street Wheels, really helps avoid scratches and such during mounting."
See all reviews for this product[+] Expand Article[-] Collapse Article
BikeMaster 3-Piece Tire Iron Set BikeMaster 3-Piece Tire Iron Set BikeMaster 3-Piece Tire Iron Set Roostin2 (Clarkston, WA, USA) One of my better decisions"These Tire Iron's are excellent quality and seem to be really well thought out as to the ...""These Tire Iron's are excellent quality and seem to be really well thought out as to the length and the bend on the ends. They are easy to use and are strong enough to change a Heavy duty 18" Moto-Cross Tirewith no problem. No signs of bending or any other weakness.In all they seem to be an excellent product, that I would have no problem recommending to anyone."
See all reviews for this product[+] Expand Article[-] Collapse Article
Motion Pro Tire Iron Set - 11" Motion Pro Tire Iron Set - 11 Motion Pro Tire Iron Set - 11" MechanicDad (West Virginia) Motion Pro Tire Iron Set"Made tire removal much easier and did not puncture tube. Quality and the correct tools ...""Made tire removal much easier and did not puncture tube. Quality and the correct tools make the job much faster.Motosport has a very helpful staff and the products they sell are top notch. Navigating their website is very easy."
See all reviews for this product[+] Expand Article[-] Collapse Article
Motion Pro Digital Tire Pressure Gauge - 0-60 PSI Motion Pro Digital Tire Pressure Gauge - 0-60 PSI Motion Pro Digital Tire Pressure Gauge - 0-60 PSI ClydeBarrow (Denver, CO, USA) Very cool product"Very nice pressure gauge. A little spendy for your average joe, but as a professional ...""Very nice pressure gauge. A little spendy for your average joe, but as a professional tech, it is money well spent."
See all reviews for this product[+] Expand Article[-] Collapse Article
Park Tool Home Mechanic Floor Pump Park Tool Home Mechanic Floor Pump Park Tool Home Mechanic Floor Pump kawikristi67 (Tigard, OR, USA) great for quick air"i hate hauling around my air comp. this is great for on the go!""i hate hauling around my air comp. this is great for on the go!"
See all reviews for this product[+] Expand Article[-] Collapse Article

Want to change a motorcycle tire, or outfit your shop? We have the tire tools you need.

So you've got a new set of Motorcycle Tires and you'd like to install them yourself. Well, there's only a few steps between you and having a new set of tires mounted and balanced by your own hand, so let's get started by listing what you'll need:

Now, we know that looks like a fairly large amount of investment to just change out a tire, but it'll pay for itself after a couple changes, especially if you're a regular track rider. So, let's get to it, shall we?

  1. Remove the valve core with the puller tool. Let the tire deflate completely.
  2. Spray your soapy water mixture around the circumference of the rim, then wedge the bead popper between the rim and tire, pointing downwards, and give it a few solid whacks with your mallet until it pops. You'll know.
  3. Place the rim protectors on the rim a little ways apart and use the irons to remove the first bead (use a bit more soapy water) by prying the bead of the tire up over the lip of the rim. If it's proving difficult, push down the tire bead on the opposite side so that it's in the middle of the wheel. This will give you a little more room to work.
  4. Once the initial bead is off the rim, pull the tire up and remove the second bead, which should be fairly easy at this point. Also, clean up the wheel and remove any weights.
  5. There should be a "light spot" indicator on your new tires, usually indicated by a red or yellow dot. Use the soapy water to lubricate the bead, line the dot up with the valve stem of your rim and push the tire on. It should be easy to get the tire on, requiring an iron for only the last bit. Be sure to double check that the tire's tread is facing in the right direction (there are arrows on the tire if you're not sure).
  6. You're almost there! Make sure the second bead is nice and soapy, then push as much as you can into the center of the wheel. Getting the remaining bit of the bead inside the rim should be easy with tire levers.
  7. Here's where you'll need the air compressor. Now, spray a little more soapy water on both beads just to make sure they seat easily. Bounce the tire on the ground a few times around the circumference, then hook up the air and inflate to somewhere in the 40-50 PSI range. You should hear two LOUD pops, which is what you want! The beads have seated and you're ready to put the valve stem back in and balance the wheel! Sometimes this step takes a bit, which is why your valve stem should be out. Let it deflate, bounce it around, try more soap, even leave it in the sun (or use tire warmers if you have them) to warm up the tires a bit and make them more pliable. You'll get it. Just have patience.
Balancing your wheel and new tire:

So, now that your tire is mounted and filled to the correct pressure, make sure that all the tire's stickers and your old wheel weights are off. Use whatever procedure necessary to put your wheel on the balancing stand (they're all generally the same, just check out the instructions that came with it) and give it a spin. Wherever it settles, use chalk, paint pen, or any other marking to put a mark at 12 o'clock on the tire. Give it another spin. If your mark ends up at 12 again, you need to balance the wheel. Use duct tape to temporarily mount a weight on the rim in line with your mark and give it another spin. If your mark points up again, it wasn't enough weight. Tape a little more and give it another spin. If the weight comes up on the bottom now, you added too much. You'll know when the wheel is balanced when it stops in fairly random positions each time. This is a time consuming process, but once it's learned, it goes faster each time. After you've got it dialed in, remove the weights you taped on, clean the wheel with contact cleaner and apply permanent weights in their place.

You're done! Congratulations, now get out there and break those tires in!

Be Informed

Be Confident

Part of the Backcountry Family:
Copyright © 2004 - 2014 MotoSport, Inc. All Rights Reserved. Selected content copyright and trademark respective companies, used with permission.