Woodcraft Clip-Ons For Tapered Fork

Woodcraft 2-piece split clip ons are specially designed to make installation and removal a snap. The 2-piece design is race proven and makes it easy to service your clip-ons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12" long and are easily adjusted to whatever custom width you desire.

The forks on these bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50 mm clip ons with a clamping area that is not wide enough to grab the entire clip-on. Unlike standard 50 mm clip ons, Woodcraft's stepped GSX-R clip-ons allow you keep stock ride height or to lower your front end and still be able to properly clamp the fork.

Note: 2003-2004 models do not allow full lock steering to the right with stock steering stops due to the throttle cables contacting the ram air tube. Racers need to either 1) build up the steering stops, 2) rotate your throttle tube couterclockwise or 3) adapt the top exit throttle housing.

• Makes installation and removal a snap.
• Race proven.
• 50 / 49 mm.
• 12" long bars which are easily adjusted to whatever custom width you desire.
• Stepped design for forks on bikes which taper just below the triple clamp to a smaller diameter.
• Sold in pairs.