Free 3-Day Express Shipping on Orders Over $99*

Shopping for Parts? Select Your Bike: Manage Saved Bikes Manage Saved Bikes Sportbike Dirt Bike Sport ATV Utility ATV Sportbike Cruiser Make Year Model

Driven Racing D-3 Grips Kit

$44.99 - $48.99
Free 3-day express shipping
On orders over $99. Shipping Info

Please choose an available item.

 
It appears you may have cookies turned off in your web browser, or are using a browser that does not support cookies. You must accept cookies to use our site. For questions call us at 1-888-676-8853.

Product Description

The best grips in the industry.

Driven Racing grips are a 2-ply grip designed to reduce vibration, arm pump, and hand fatigue. Made from an outer ply of PVC designed to stabilize the grip surface surrounding a second layer of Krayton gel to absorb vibration. The end result is a grip that is comfortable on long rides, track days, and for racing.

  • 2-ply grip using Krayton gel.
  • 6061 billet collars and rings.
  • Interchangeable assembly.
  • No adhesive required.
  • Fits 7/8" bars.
  • Open end design.
  • Overall length: 120 mm.
  • Outer diameter: 32 mm.
  • Left side inner diameter: 22.23 mm (7/8").
  • Right side inner diameter: 25.4 mm (1").
Fitment note: Suzuki GSX-R, SV, and Hayabusa models may require throttle tube ridges to be ground off for best fit.
  • Customer Reviews
  • Ask an Expert
1-8 of 8
Overall
Verified Purchaser
D3 grips are very good

it took time after installing them to get some seat time due to a back surgery. but! after some good miles that would usually have my hand and right forarm numb from the vibration....im happy to say that i just started to experience the tingling after that distance! absolutely love these grips. it wont remove all the vibration. but it was far better than i thought it would be. 5stars from me for sure. and i did have to take my dremel and simply remove the outer lip of plastic sleeve so throttle grip would slide on. i suggest liberal dose of WD-40 and straight push. thanks driven for a wonderful product.

Overall
Verified Purchaser
Location: Washington, USA
Driven Racing D-3 Grips Kit

needed to trim the throttle grip end to make a fit. Otherwise ok.

Overall
Location: Leesburg, VA, USA
2001 suzuki katana 600 FIT?

I love the gold color and style of these grips. When i checked it said i may need to shave my throttle down a little and in doing so. it never felt tight so i just applied some grip glue and that solved that problem.

Overall
Verified Purchaser
Not sure about these yet.

I have yet to ride with these so I'll review the install. This was the first pair of grips I've replaced so that being said they either aren't easy to get on or I didn't use the best method, seem better than the stock ones though.

Overall
Verified Purchaser
Location: Mass
Driven D3 grips

Awesome grips easy to install and look superb!! Best way to install is with wd-40 do not twist grips push straight on trust me it worked beautifully on my 06 R1!

Overall
Verified Purchaser
Location: McDonough, GA, USA
Driven D3 grips

The best grips I have ever used, no more arm pump and the numbness I got with stock or other grips is gone!

Driven Racing D-3 Grips Kit
Overall
Verified Purchaser
Location: Bloomington, MN
Love them

Love these grips they look amazing and feel awesome the only bad is if you use the bar strap if you trailer your bike the rubber tears a little but you can get replacements for cheap

Overall
Top 250 Contributor
Location: Kailua Kona, Hawaii
Match your Ride!

Like the title says you can match your ride with style with theses..if u have a blue blike..blue grips with any color combo and so..Drivien racing makes one of the best products!

1-8 of 8
Total Questions (4)
Questions with answers:
  4
Questions without answers:
0
Shawn Location: Georgia
Stef099 Location: Castel Frentano Province of Chieti, Italy
1-4 of 4
orange Over 7 months ago
Will these or the d axis grips fit a g2 ergonomics 125 mm throttle tube?
MotoSport Staff
Over 7 months ago Location: Portland, OR, USA
They will fit the tube but the grips are 5mm shorter than the length of the tube. If you can stand the small gap this will create between the grip and the throttle housing, then they will fit fine.
Shawn Over 8 months ago Location: Georgia
Will these fit an 06 cbr600rr?
Over 8 months ago Location: McDonough, GA, USA
Yes they fit great, you have to sand down the throttle tube a little to get the grip on. When you remove your old grip make sure you clean the bar ends good with break cleaner. When you install the D3's give the inside of the grips a good soaking of the break cleaner and the bars and the grips will slide on and no grip glue need. On the throttle side will take a little more pressure to get on but they will slide on. They are the best grips I have used to date.
MotoSport Staff
Over 8 months ago Location: Portland, OR, USA
Yes they will fit, like the customer answer states, you will need to sand the throttle tube some and then they will go right on.
Jon2010 Over 9 months ago
Will these D3 grip work on my 2010 Kawasaki Ninja zx6r with no modifications?
MotoSport Staff
Over 9 months ago Location: Portland, OR, USA
These technically are the right dimensions for your bike but, some bikes, but not all, have an OEM throttle tube design that contains a ridge or ridges on the throttle tube itself. In order to install any aftermarket grip besides the OEM replacement, these ridges must be removed. Common ways people remove them are by sanding or using a rotary tool, and least common of all is replacing the tube itself with an aftermarket throttle tube. The Kawasaki's are one of the bikes that do have these ridges.
Stef099 Over 11 months ago Location: Castel Frentano Province of Chieti, Italy
This article : Driven Racing D-3 Grips Kit is compatible with buell xb9sx 2009? 9?
Hello I wanted to know if the item Driven Racing D-3 Grips Kit is compatible with my bike model Buell XB9SX 2009, and although I can mount this on the knobs: Driven Racing Bar End Weights V2. Thank you.
MotoSport Staff
Over 11 months ago Location: Portland, OR, USA
The D3 grip is a 120mm grip and will work on your Buell XB9SX. The V2 bar end weight will also work in conjunction with the grips.
1-4 of 4

Be Informed

Be Confident

Part of the Backcountry Family:
Copyright © 2004 - 2014 MotoSport, Inc. All Rights Reserved. Selected content copyright and trademark respective companies, used with permission.