JGF1213 Over 7 months ago Location: Enola, PA, USA
Adapting this to a Can Am Spyder?
Would this unit keep the ECU from going into a closed loop?
I have a 2008 Can Am Spyder with K&N air filter, Tailgunner exhaust, and TBR Juice Box Pro fuel management system. I am getting flat spots or a flutter at lower RPM in high gear. I need to trick the ECU into staying in an open loop, so It will not lean out the mixture when I add fuel with the TBR Juice Box Pro
MotoSport Staff Over 7 months ago Location: Portland, OR, USA
Each Bazzaz O2 eliminator is made specifically for the model(s) it is listed for, and is designed to trick the ECU into thinking the factory O2 sensor is still installed. The eliminator locks the ECU into one fuel table, so it is no longer trying to adjusts its fuel settings based on the feedback of the factory O2 sensor. However they do not make an O2 eliminator for the Can Am Spyder. It’s not going to work. They had the Spyder in their shop but were unable to develop a working O2 eliminator because they couldn’t dyno it. The O2 sensor system on the Spyder is much different than the other bikes they have made eliminators for.