The complete rearset kit consists of the rearset plates, footpegs, a three-piece billet brake pedal, a three-piece billet shift pedal, and all of the needed hardware (shift rods, etc.) to install the kit properly.
They are made from tough, aircraft-grade 6061 T6 aluminum. They are much stronger than O.E.M. brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.
- Consists of the rearset plates, footpegs, a three-piece brake pedal, a three-piece billet shift pedal, and all needed hardware for installation.
- Made from tough, aircraft-grade 6061 T6 aluminum.
- Much stronger than O.E.M. brackets.
- Features breakaway pegs designed to break off in a crash, saving the rearset bracket while still leaving enough peg to finish the race or ride back to the pits.
- High-grip knurled pegs give supreme feedback and some of the best traction available today; footpegs also feature a raised lip at the end for optimum grip, especially in the rain.
- Notes: Most kits can be used in either Standard or GP Shift (Reverse Shift), but may require purchase of a converter (sold separately) to change orientation. Images are for display only, item may vary according to fitment.
Detailed Specifications:
- This kit features two-position brackets.
- Uses a special Woodcraft reversing link that keeps your rod running through the frame, out of harm's way, while utilizing the stock shift rod and quick shifter.
- 12 position adjustable.
- Moves pegs up 1/4 - 1-1/8" and back 3/8 - 7/8".
- Note: GP Shift (Reverse) ONLY.
