Superlite is way better then supersprox. I use superlite on my R6 and my Ninja. This sprocket can take any type of abuse, and still looks good.
The Superlite 520 Sprocket And Chain Kit - Quick Acceleration includes ONE Steel Countershaft (Front) Sprocket, ONE Steel Rear Sprocket, and your choice of ONE Premium 520 Drive Chain, each with the following features:
Superlite Series Sprocket And Chain Kits are complete with high-quality, lightweight chromoly steel sprockets and your choice of premium D.I.D brand chains. They make a great looking and great performing replacement chain set!
Superlite Steel Front Sprocket:
Superlite RS7 Series Steel Rear Sprocket:
D.I.D 520 ERV3 X-Ring Chain:
The D.I.D ERV3 X-ring chain is the ultimate high-performance, lightweight, low-friction race chain available and is used extensively by many off-road race teams. The ERV3 X-ring chain utilizes D.I.D's patented X-ring technology which reduces friction by 50% over standard O-ring chains for minimized power loss. The pins on the ERV3 X-ring chain have been put through a patented heat-treatment process to produce a pin that is 1.5 times harder than conventional pins. The result is a chain that is significantly stronger and offers better wear resistance than many other chains on the market. D.I.D ERV3 X-ring chains feature a gold-plated finish that resists rust and adds a little style to your motorcycle or ATV.
D.I.D 520 ZVMX Series X-Ring Chain:
D.I.D's engineers are continuously improving chain designs in order to handle the tremendous horsepower loads of today's high performance motorcycles. In developing the new DID ZVM-X series, D.I.D focused on "Rigidity." Traditionally, "Tensile Strength" has been the bench-mark to indicate overall strength, but tensile strength is only a laboratory static measurement of a chain's fracture point. Rigidity, on the other hand, is the ability of a chain to withstand the forces that occur in the real world that riders experience. Increased rigidity means better power transfer from the engine to the ground, greater resistance to stretching under load, and overall improved performance that meets the demands of the current high-power bikes and the people who ride them.
Note for installing X-ring chains: As X-ring chains are wider than standard roller chains, when fitting an X-ring chain to a motorcycle that was fitted with a non O-ring chain as original equipment, it is essential to check that there is proper clearance of the engine cases near the countershaft sprocket and any other places of close contact. Failure to do so could result in damage to the chain and motorcycle and could ultimately cause the chain to fail.
Note: Image is for reference ONLY, actual product will vary based on fitment and selection.