Shopping For:
  1. Clear Selected Ride Clear Selected Ride
  2. Manage Saved Rides
  3. Change Your Selected Ride
2006 Kawasaki ZX600 - Ninja ZX-6RR

Vortex Motorcycle Frame Slider Kit

Retail: $78.99
$69.99
You Save: $9.00 (11%)

Please choose an available item.

Please make your selections below to view availability
FITS: 2006 Kawasaki ZX600 - Ninja ZX-6RR change
 
It appears you may have cookies turned off in your web browser, or are using a browser that does not support cookies. You must accept cookies to use our site. For questions call us at 1-888-676-8853.

Need Assistance?

Call 1-866-677-7338

You may also like

Vortex Swingarm Spools - 2006 Kawasaki ZX600 - Ninja ZX-6RR Vortex Motorcycle Frame Slider Kit
Vortex Swingarm Spools
$17.99
Vortex Bar End Sliders - Black - 2006 Kawasaki ZX600 - Ninja ZX-6RR Vortex Motorcycle Frame Slider Kit
Vortex Bar End Sliders - Black
$29.99
A1A Frame Slider Kit With Vortex Base - 2006 Kawasaki ZX600 - Ninja ZX-6RR Vortex Motorcycle Frame Slider Kit
A1A Frame Slider Kit With Vortex Base
$99.99
You Save: $15.00
Vortex Motorcycle Frame Slider Kit - Main
zoom: + −

Product Description

  • The Vortex frame slider kit is the only one of its kind with their two-piece design including a patented base and quality components.
  • The Vortex frame slider base is made out of solid billet aluminum providing a solid mount for the slider and helping protect your bikes frame and engine. Vortex supplies special-composite steel bolts to provide a sturdy mount to your motorcycle.
  • The Vortex two-piece design allows for a convenient and inexpensive way to replace the pucks in the event of a fall.
  • The Vortex pucks are made out of a quality urethane that will grind during a slide unlike many other competitors that will shatter.
  • Vortex frame slider pucks are available in red, blue, black, yellow, white, chrome (aluminum), and black (also available in shorty) .
  • Kit includes: 2 frame slider bases, 2 pucks, and hardware.
  • Customer Reviews
  • Ask an Expert
  • Also Offered For
(15)
4.7 out of 5 stars
5 star   11
4 star   4
3 star 0
2 star 0
1 star 0
Write a Review
“ I recommend this product. ”
CruiserZero Location: Kansas City
“ These frame sliders are excellent and easy to install!! I have a 2006 Kawasaki 636 and thought it wou... ”
SeanL Location: Missouri
“ I have nothing but good things to say about Vortex frame sliders. ”
fireblade08 Location: Daly City, CA
1-10 of 15
Overall
2005 GSX-R1000
Verified Purchaser
Location: Kansas City
Excellent Product
I recommend this product. The quality and craftmanship is A1. I had Suzuki OEM (Chassis Protectors) Frame Slider Kit. The Suzuki pucks shattered causing damage to my fairing....the Vortex pucks will grind away instead of shattering. Vortex is kinda limited on puck colors, but they are well made and they get the job done. I only put top notch aftermarket parts on my bike period!
Overall
Verified Purchaser
Location: Missouri
Vortex Frame Sliders
These frame sliders are excellent and easy to install!! I have a 2006 Kawasaki 636 and thought it would be difficult to cut the plastic to install, and to my surprise, it was not. Excellent product and great looking!!I would recommend to anyone.
Overall
Location: Daly City, CA
Best sliders!
I have nothing but good things to say about Vortex frame sliders. they saved my motorcycle in an accident, saved me thousands of dollars in damages. were quite easy to install, and look great. i would recommend them over any other brand, shogun, ect. ive experienced what these can do and how much money they can save you. buy vortex frame sliders from motosport. the customer service is excellent
Overall
Location: Metro Manila NCR Philippines
Does the price comes in pair or 2 pcs
Overall
Location: triangle, va
Easy
Great product easy to install on my 05 R1 no cutting, i backed 2 bolts out and put 2 bolts in. Got the black pucks on my red bike looks great very subtle for as much as they will save your bike in the event of a crash. Love vortex products great company great products
Overall
Top 1000 Contributor
Awesome
These pucks are awesome, but the only thing is that I have a 2009 CBR 600 and the left side needs to be longer than the right and all of the pucks are the same size.
Overall
Location: Connellsville, PA
nice product, good look, good protection, 1 puck bolt was missing, but called vortex and they shipped me 2 of them. had to do a small amount fo fairing trimming on left side, other than that, super easy install for a good priced, quality product
Overall
Top 500 Contributor
Location: westminster sc
First purchase you should make!
i bought these for my 08 cbr1000 and im so glad i did! i went down in the mountains at about 50 miles an hour, slid all the way across the road and into the ditch. the ditch tore up the front a pretty good bit but the side fairings and everything else ended up almost perfect! takes a little patients to put these on if you gotta cut the holes but easy enough. i used play-doh to find where the motor mount bolt lines up with the back of the fairing and then used a hole saw to cut the hole. used a dremel tool to trim the hole and it turned out perfect! dont ride without these they save your wallet in the long run!
Overall
Top 500 Contributor
Location: Los Angeles, CA
Lifesavers!!!
great sliders. very easy to install. I like that I can replace the pucks. bike went down once already and only damage was to the puck which I can replace easily replace. without these puppys I don't even want to think about the damage I would've had to repair.
Overall
Location: Santa Ynez, CA
Great value, easy install
Got these after dropping my bike twice. Super easy to install, the bases look nice. I wish they stuck out a little farther though, probably won't protect my levers in a fall. Only problem was they were missing the puck bolts upon arrival, one quick call got them here fast.
1-10 of 15
Total Questions (18)
Questions with answers:
  18
Questions without answers:
0
Have a question?
“ Will i need to modify my plastic for an 06 600rr?... ”
gilpin
“ Will i have to cut the fairing on my 02 954?... ”
hondaguy954
“ Will these work on the 08-10 CBR 1000RR without cutting the fairings? If not, do you carry and slider... ”
richierich Location: NY
1-10 of 18
gilpin Over 3 years ago
Will i need to modify my plastic for an 06 600rr?
Expert MotoSport Staff
Over 3 years ago Location: Portland, OR
Yes, vortex says fairing modification required.
Answer this Question
blazin450 Over 3 years ago Location: ny
2006 yfz-R6s?
will i have to cut the fairrings for these to fit?
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
Yes.
Answer this Question
jayrock Over 3 years ago
Will I have to modify the plastic for a 05 gsxr 1000?
Expert MotoSport Staff
Over 3 years ago Location: Portland, OR
No.
Answer this Question
hondaguy954 Over 3 years ago
Will i have to cut the fairing on my 02 954?
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
Vortex shows no fairing modification needed.
Answer this Question
peace Over 3 years ago
Fit a 2006 Kawasaki zx6 636?
Will these fit without having to cut my plastics?
Expert MotoSport Staff
Over 3 years ago Location: Portland, OR
These require fairing modification.
Answer this Question
richierich Over 3 years ago Location: NY
Will these work on the 08-10 CBR 1000RR without cutting the fairings? If not, do you carry and sliders that will?
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
The vortex kit requires modification and its the only kit we carry for that bike.
Answer this Question
811guy Over 3 years ago Location: San jose Ca.
I own a 06 ninja 600 rr do i need to modify panels for pucks?
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
Yes, the 06 requires fairing modification.
Answer this Question
eizquierdo Over 3 years ago
2007 YZF-R1 is fairing modifications need?
MotoSport Staff
Over 3 years ago Location: P+RTLAND
No modification should be needed.
Answer this Question
Rocky05 Over 3 years ago Location: Friendswood, Texas
Frame Sliders?
I have a K-9 Gsxr1000 and like to buy a no modification frame sliders. Will this work for my bike with –out any modification to my plastic? Thnaks
Expert MotoSport Staff
Over 3 years ago Location: Portland, OR
This kit requires fairing modification. Vortex is coming out with a kit for the 09 Gsxr that will require no modification. We do not have those in stock yet.
Answer this Question
Silent Over 3 years ago
Can it be installed on Suzuki Katana 2005 (GSX600FK5)?
If yes, are fairing modifications required? Thank you!
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
No. Vortex does not make this for the Katana.
Answer this Question
1-10 of 18

Motorcycle

Honda

Honda CBR1000RR ABS
Honda CBR1000RR
Honda CBR600RR ABS
Honda CBR600F4
Honda CBR600F4I
Honda CBR600RR
Kawasaki

Kawasaki ZX1000 - Ninja ZX-10R
Kawasaki ZX636 - Ninja ZX-6R

Kawasaki ZX600 - Ninja ZX-6R

Kawasaki ZX600 - Ninja ZX-6RR
Suzuki

Suzuki GSX-R 1000
Suzuki GSX-R 600
Suzuki GSX-R 750
Suzuki GSX1300R - Hayabusa
Suzuki SV650
Suzuki SV650S
Yamaha

Yamaha YZF - R1
Yamaha YZF - R6
Yamaha YZF - R6S
* required entry

Forgot your password?