Put about 3 rides with these. And they started leaking. They wouldn't hold the pressure. Ended up removing and installing the stock ones back on.
Motion Pro Micro Fork Bleeders - KYB/Showa
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
These are great! This is one of those things that you don't appreciate until late you use them. Fitment was perfect and they were easy to install. Very convenient to bleed off the air.
One of the bleeder valves had a large metal bur on the threads and the other valve leaked.
I installed on a 2012 RMZ450 and was able to fully seat them using my fingers only with no screwdriver and they have been working fine for the few rides I have been on. I hear some of my fellow riders at the track have issues with them popping the bleeders out and had to go back to the factory screws but so far so good for me.
One of the bleaders had a bur on the threads
The website says that these will fit the Honda CRF 150RB front fork. The cap that is on the CRF 150RB it will not fit. They will not screw in straight because of where the bleeder screw is.
Work perfectly! Nice low profile fit, much more compact than other brands I've used in the past.
These things save so much time
Awesome fit easily installed work as intended
Easy install and easy use. Happy with these
This takes a minute to install and will save you time in the future. Well worth the money
works like they supposed to. this should be a factory product, its just stupid not to have theses on every bike you will ever own.
A lot of people said that these for bleeders leaked but I got them for my 2015 kx100 and haven't noticed any leaking around the seals of the air bleeders, and the work like they are supposed to
I ride in Colorado, from 5,000 ft to 10,000 ft of elevation. This is a must have
Look, fit, and work great fast shipping happy man
Great idea but they leak. Finished a race and there was all kinds of oil and grit around the base of them (yes screwed them all the way in). Going back to the stock screws.
you will never know how much arm pump is caused by the forks having too much air in them. that is until you install these and you can easily take it out before every moto.
Fit exactly as it should on my 2010 RMZ250, works as expected. Much easier than bleeding the air with the stock screw.
Much easier to bleed air than the stock screw and looks cool!
Great product for ease of use. Can use it on long rides when things start getting ruff. Low profile and out of the way.