You get what you pay for. these bar ends feel extremely cheap, the weigh nothing. They did not fit my Daytona 675 bars.
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
The overall quality of this product is great! Easy installation, given that they are bar ends. It shouldn't be difficult. I have had them in for about 4 months now and they have not vibrated loose.
I would definitely recommend this product.
Only fit on one side of my 09 GSXR 600. I had to sand down the other bar end a bit before I could slide it in. Other than that, it was an easy install. It even comes with an allen wrench.
I ordered these along with a bunch of oem parts because mine were missing. They fit well and appear to be of decent quality. They fit right in the 7/8 bar and havent worked loose yet, reduced vibrations well , and look good.
Very easy install was compatible with my 2005 HONDA CBR600RR the only surprise was the semi-circle piece inside the handle bar that matches the OEM bar end sliders. this product doesn't have the semi-circle cut on the inside of it, but the size of the bolt and the bar end slider allow it to fit snug and flush.
I bought a used bike and the previous owner dropped it and bent the original bar ends. Ordered a pair of these and they worked like a charm. Even comes with the allen wrench to install them!
This product does not fit the 2001 ninja 250R. Plain and simple.
I bought these for my 08 Ninja 250r and they just dont fit, which I thought was weird because the site said they would fit. Im sure its a great product, they seem really solid but I guess I wont be finding out for sure unless I get these on my ride.
the qaulity was pretty decent for such a cheap bar end, but these DO NOT FIT 08 ninja zx10r ! they have been sitting inside my house in a drawer , and the bolts they give are already starting to oxidize. spend the extra cash on a better product! youll be glad you did!
My GSX-R750 was having the same problem of losing bar ends on one side, and the first time i replaced it with an OEM bar end, $25 for one! So the next time I lost a bar end, I bought a pair of these, and they havent come loose yet! They look good and feel solid too.
well, after losing two stock bar ends off of my k6 gsxr1000 in 6 months and not wanting to fork over another $25 for a replacement from suzuki i looked for a better solution. l/p has the best value/quality that i've found. biggest difference between the l/p parts and stock is that the l/p ends actually fit into the bars and will stay attached in the event of a slide(although i haven't had to test them yet). the stock ends only have a rubber grommet to hold them in so they will come off if any force is applied to them. the l/p ends have the aluminum machined to fit into the bars and add additional crash protection. only mod you may have to do is to file down the two nubs on the end of the stock bars to get the ends to fit flush with the grips. excellent product!
These are of the highest quality that should be expected from LP. But don't do what I did and just order them and then try and figure out what the small end will not fit in, like Vortex clip-ons. If you are not sure of what to order then go back and get the flush mounts, they are most likely what you need.