Velvet ropes and oxygen pumps push that nagging voice of restraint back where it belongs. This could be the adoring gaze of biddies all around, as well. Could be the blue pill-induced tinglies, too. Your confidence is not without merit. You've been on the top of the game for decades; the chips always fall in your favor. But where luck is optimistic, fate is vicious. Always be wary of the flop, because when the chips fall, they fall hard.
Injection-molded polycarbonate shell for strength and durability.
Recessed twin channel SuperVent with industry leading intake and exhaust ports for increased cooling.
Fog-free Icon Optics with Prolock shield locking system.
Adjustable chin and forehead venting system maintains continual temperature for increased comfort in any riding situation.
Easy adjust ergo vent switch for superior airflow control.
Available in four shell sizes with an Icon exclusive long oval headform for ultimate fit and comfort.
All World Standard, meets or exceeds the following: DOT FMVSS 218 (US), ECE 22-05 (Europe), SAI AS1698 (Australia) and SG (Japan) Safety and Testing Standards. (Note: Does not ship with SAI or SG certification stickers unless purchased from an authorized dealer in that country.)
Note: Ships with clear shield. Image is for display only.
Ten years of pushing the envelope, of going above and beyond. A decade of creating technologically advanced products designed by and for the needs of the street rider: you. The Airmada is the end result of all the hard earned experience in an industry that doesn't tolerate second best. This is the highest evolution of helmet craftsmanship and you'll realize this from the moment you take off.
The first thing you'll notice is the new low-profile shell, which now comes in four separate sizes to better fit a variety of riders. The energy absorbing dual-density EPS liner uses the rider-preferred oval head form and comes in a further five sizes to offer a personalized fit without an ounce of wasted space. The effort to reduce the helmet size combines with the tough polycarbonate shell to create a helmet that fits better, is ridiculously light, and still maintains the exclusive ALL WORLD STANDARD of ICON to suit your riding style.
With fit and function in mind, the designers of the Airmada focused on bringing rider comfort to a new level. The Airmada keeps you cool when the pace heats up. The SuperVent system has been completely revamped with even more effective ventilation and exhaust porting across the helmet. The new Ventral Primary intake improves the Airmada's cooling airflow in ways other helmets can only dream of, and long nights were spent improving the ergonomics and function of the venting controls. Designed and positioned to make on-the-fly adjustments quick and easy, the Airmada is built from the ground up to offer perfect comfort for any riding condition.
Even the shield system has been completely redesigned to give riders the best view of the road ahead. The new Rapid Release shield removal system allows you to change an Icon Optics shield in a fraction of a second. This cutting-edge system allows you to select the right shield for the conditions, all of which produce an unrivaled distortion-free line of sight to what lies ahead. The Icon(r) Airmada once again sets the standard for the ideal street helmet.
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.