HP Tools Sport Bike Rear Stand

HP Tools Sport Bike Rear Stand
HP Tools Sport Bike Rear Stand

Unfortunately, we no longer carry this item. It may be discontinued or have just sold out.

Please contact Customer Service (1-888-676-8853) or search for another product if you continue to see this message.

Find other: HP Tools Bike Stands

Description See Also: 20 Reviews 4 Questions
Item #

Read More
20 Reviews
4.2 out of 5 stars
5 Star   9 4 Star   7 3 Star   3 2 Star   0 1 Star   1
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Saylor Top 500 Contributor
Tacoma, Wa
Works well

It does its job. The fit and finish is what you would expect for the price. The quality is not of the highest but it will lift your bike no prob. Make sure you tighten it all up after you get it set up for your bike. I have no fears of my bike falling off.

CandyRedR6
Ottumwa, IA
Not bad

without looking at directions was easy to put together. it is of poor quality though and had to get the bike on it to contour to its shape. other than that, it is a great stand, can move the bike around on it and seems to be very sturdy.

hotboy
Shreveport,Louisiana
Great stand

this stand works great for me. i use it on my 04 gsxr 1000. easy to assemble and very good product. i only use for cleaning and minor maintenence to my bike. so i would definetly recommend this for the price.

MonsterR1
Anniston Alabama
Don't cut corners,get this kit!!

I installed this clutch on my R1 and I love it! Installation was easy,had all the bits in it,but if you are overly retentive be forewarned on an 04-06 yammie there is a belleville spring to reduce noise when clutch is disengaged behind the rearmost steel and a safety wire thickness snap ring to retain the rearmost steel not included in the kit....I am overly picky however and mine was in plenty reusable condition so it was a non-issue...the steels are far superior to factory ones so don't cut corners by just using a fiber kit....get the whloe kit!!!totally worth it!!!

MSBTally Top 1000 Contributor
Tallahassee, FL
Watch That Width Setting

Overall good product but width is a little wide for a Ninja 600. The adjusters just barely accomodate a 600 and you have to be very careful. A slight bump can knock your bike off the stand and cause the bike to fall. If you have a 600, may want to buy a stand specifically made for that size.

Skibum215
Boulder, Co
A real bargain

I wasn't sure about this product, but I just couldn't bring myself to buy the Vortex at almost double the cost. I was worried about quality after reading the post about it bending. Well worry no more, after the 30 second assembly time, I had my bike up in the air ready for service. I would agree that it is too small for some of our Plus sized bikes.

sprockit

Does exactly what its supposed to for a fraction of the cost of other similar models.

Rider937
Honolulu, HI
Great product

I love that this can come apart and can more or less lay flat. I don't have a garage so I have to keep it in my car because the wife won't let anything auto related into the flat.

tactical Top 1000 Contributor
ny
Good stand

had it for 2 years,works great a little heavy being steel but totally worth the price

polcat500
baton rouge la
Bang for the buck

had mine for a few years, works just fine for shade tree work.

Alex650R Top 1000 Contributor
florida
Works just fine

i have only used this stand a few times but in those few times it seemed to work and hold good. putting it together was easy and you cant beat the price either

professor
Stand is too Narrow for Larger Bike

This stand does not fit larger sport bikes such as hyabusas or ZX14's. It is too narrow and will not fit outside the swingarm. Force required to lift the bike is high due to short handle, This is a great high stand for a smaller bike such as GSXR's.

jah4
Stand

Good product. Only issues are the rubber that keeps on coming off

Lyth
Throggs Neck, Bronx, NY
Works great

I was a bit weary about buying this stand after reading some of the reviews but I am glad that I did. I have used it half a dozen times to lift my bike and it is great. I don't know how I didn't have one before. My bike weighs about 420 lbs and this stand lifts it effortlessly. It is very sturdy even with someone sitting on it.

gsxr7777
Cottage Grove, Mn
Good product

Used for a 07 gsxr 600 worked great. Would recommend!

richierich
NY
HP TOOLS rear stand

I wasnt sure about which stand to buy in the beginning but i knew i wanted to save money. I had a coupon for here so i went with this stand. I read a review that someone had bent theirs trying to lift their bike? I wasnt sure how this was possible?? The first time i lifted my bike it worked GREAT!! I have moved my bike around on it, lifted it, worked on it. I put the stand to the test. And it has worked flawlessly...I am very happy with the quality and price of this item. I would recommend it to anyone looking for a quality, cheap stand. I use this stand without any swingarm spools and it still works great. I couldnt imagine this thing bending at all?!?!?!?! It is rock solid and i am confident enough to leave my bike on it at all times. Im at work right now and my bike is safe and sound on the stand in my garage. Very happy with the item. GREAT BUY!

k6gixxer1000
Mooers Forks,NY

DNF1
AZ
Great!

works great! utilizes your swing arm or if you have spools.

bmcelhearn
Cape Vincent, NY
Bad Luck

I bought this stand for my 2005 GSXR 600. I was able to put the stand together very easy and when I went to lift my bike, the stand bent. my bike weighs less than 400lbs and should have no trouble with it at all I was told. I called MotoSport and told them about it and they told me they would recommend the Vortex stand before the HP Tools stand.

PsychoMike
Sacramento, CA
Works Great

You hear a lot of talk about having to use a stand strong enough to lift a house. I bought this figuring I would reinforce it - cheaper and faster than building my own, but it works great out of the box. I use it with spools on my SV650S and without spools on my SuperHawk. No issues. Easily rolls the bike around the shop also.

4 Questions
Answered:   4
Not Yet:   0
lan77
Q: Will this stand work on my 06 cbr600 with a single sided swingarm?
Over 6 years ago
patrick77
MotoSport Staff Expert
Over 6 years ago Location: Portland, OR
A: No. this won't work with a single sided swingarm.
Emoney619
Q: Will this HP Tool rear stand work on my 07 Yamaha R1?
Over 8 years ago
james718
Expert MotoSport Staff
Over 8 years ago
A: This stand will fit a sport bike that has either rear spools or a swing arm. I'm gonna guess you bike has either one, so yes this should work.
Suzuki600
Q: Will this work on my Suzuki gsxr 600 2006? Do I need to use swingarm spools? I currently dont have any swingarm spools?
Over 8 years ago
james718
Expert MotoSport Staff
Over 8 years ago
A: This stand can be used on the swingarm or spools. this will work fine on a GSXR600.
hayn
Q: Will this stand work on my 2008 gsxr 1000?
Over 8 years ago
james718
MotoSport Staff Expert
Over 8 years ago
A: Due to this stand supports motorcycle from the swing arm or swingarm spools makes this very universal. Also it has adjustable width to accommodate most sport bikes.
1-4 of 4

Find More