GMAX delivers a brand new off-road helmet that is DOT / ECE approved. The All New GMAX MX86 is all new from the ground up. This lightweight helmet is equipped with Spa Soft Coolmax interior to allow for maximum comfort. It features a total of 16 intake and exhaust vents that are aligned with shell / styro vents and the comfort liner to help you cool no matter the conditions.
The All New GMAX MX86 features a DOT and ECE approved lightweight thermo-plastic alloy shell.
Plush removable, washable Spa Soft and Coolmax interior and cheek pads allows for adjustable fit and comfort that is second to none.
The cheek pads feature a multi-density foam construction creating a superior fit.
Optional interior and cheeks pads available (sold separately) for customizing fit.
Large eyeport that accepts large frame goggles.
Eyeport trim has integrated "Roost" guard in the nose area for added protection.
Industry leading 16 vents that create maximum airflow that is achieved through shell / styrofoam and comfort liner vents.
Final clearcoat covering for outstanding finish and durability.
Lateral styrofoam inserts: These additional support inserts are located between the cheek pads and shell for increased comfort and reduce outer noise.
Visor is fully adjustable, flexible and vented for maximum vision and venting.
The high flow mouth piece vent allows for quick and easy removal from the front of the helmet for cleaning.
Removable and washable foam dust filter in the mouth piece.
Padded chin strap.
Optional cold weather breath deflector available (sold separately).
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.