Fly Racing began as a manufacturer of motorcycle handlebars and helmets. Since then, the brand has quickly developed into one of the fastest growing powersports apparel brands in the market.
Poly-Alloy Shell Construction: Combination of high-strength poly-alloy materials create a durable lightweight shell.
Dual-Density EPS Liner: Two layers of EPS (Expanded Polystyrene) - one softer and one slightly harder - combine to provide more progressive impact absorption for different levels of impact.
Flow-Through EPS and Comfort Liner Air System: EPS (Expanded Polystyrene) and comfort liner align to maximize airflow.
High-Flow Ventilation: Intake ports across the front of the helmet force cool air in while two large vents across the back maximize the movement of the hot air out.
Adjustable Vents: Include one (1) mouthpiece, two (2) brow, two (2) cheek, one (1) top and two (2) rear vents.
Anti-Fog Face Shield: Optically clear shield with state-of-the-art fog-free technology, anti-scratch hard coating, and 100% UV protection.
Drop Down Inner Sun Shield: Inner shield is easily raised and lowered with a lever on the side of the helmet.
UV/400: 100% protection from the sun's ultra-violet rays on both the outer face shield and inner sun shield.
Easy Shield Changes: Quick, secure and tool-less removal and installation.
Quick-Release Washable Coolmax Comfort Liner and Cheek Pads: Ultra-plush, hydrophilic (water loving) liner absorbs sweat, is perforated to provide plenty of ventilation, and easy to remove and clean with Fly's "Quick Snap" system.
Removable Air Guide: Helps direct airflow upwards across the shield to help keep the shield fog free.
Safety Certifications Include DOT and ECE.
5.0 out of 5 stars
5 Star14 Star03 Star02 Star01 Star0
Write a Review
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
A: Yes. Please call one of our sales professionals for availability.
Dirt Bike / ATV: 1-888-676-8853
1-1 of 1
20.8 - 21.625" (53 - 54 cm)
21.25 - 22" (55 - 56 cm)
6 7/8 - 7
22 - 23" (57 - 58 cm)
7 1/8 - 7 1/4
23 - 23.75" (59 - 60 cm)
7 3/8 - 7 1/2
24 - 24.5" (61 - 62 cm)
7 5/8 - 7 3/4
24.5 - 25.25" (63 - 64 cm)
7 7/8 - 8
18.25 - 19" (47 - 48 cm)
5 7/8 - 6
19 - 19.75" (49 - 50 cm)
6 1/8 - 6 1/4
20.5 - 21.25" (51 - 52 cm)
6 3/8 - 7 1/2
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.