Fly Racing began as a manufacturer of motorcycle handlebars and helmets. Since then, the brand has quickly developed into one of the fastest growing powersports apparel brands in the market.
Advanced Composite Spectra(r) Shell: Lightweight superior fit and comfort using advanced CAD technology. Spectra(r) is stronger than steel and 40% stronger than Aramid fiber commonly known as Kevlar(r).
Dual-Density EPS Liner: Two layers of EPS (Expanded Polystyrene) - one softer and one slightly harder - combine to provide more progressive impact absorption for different levels of impact.
Flow-Through EPS and Comfort Liner Air System: EPS (Expanded Polystyrene) and comfort liner align to maximize airflow.
Quick-Release Washable Qwick-Dry(r) Comfort Liner and Cheek Pads: Ultra-plush, hydrophilic (water loving) liner absorbs sweat, is perforated to provide plenty of ventilation, and easy to remove and clean with Fly's "Quick Snap" system.
Drop Down Inner Sun Shield: Inner shield is easily raised and lowered with a lever on the side of the helmet.
Easy Shield Changes: Quick, secure and tool-less removal and installation.
Optically Superior Anti-Fog Face Shield: Optically clear shield with state of the art fog-free technology and anti-scratch hard coating.
Shield Lock: Provides peace of mind shield will remain closed no matter what the condition.
Removable Air Guide: Air guide helps direct airflow upwards across the shield assisting in keeping a fog free shield.
Safety Certifications Include DOT and ECE.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.