Worked great, Easy to use.
Factory Effex Universal Background Sheets
You May Like
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
this company is the best I have ever felt with and I have felt with a lot of dealers but nothing as good as this one Donald Grey schroon lake ny
Don't waste your money. Does not stick, even on prepped surfaces. Around corners, forget it.
I use the backrounds for making protective covers on my street bikes paint surfaces. Very durable and matches most colors. Great stuff!
I've been using the clear for years on my bikes. I trace the areas where my legs or boots rub (shrouds, etc), I cut them out, then apply it. Its been great for saving my plastics, especially with newer bikes that have the graphics molded into the plastics. Just make sure you thoroughly clean the surface so you get the best adheration possible.
Good quality stuff, and it came in like 2 days. You actually get a lot of it for the price compared to other websites. Easy to cut and put on. I actually used it to make custom graphics
just barley fits but will work if you have two people
Excellent ! Easy to work with
Thick and sticks well. Not great over round side plates
96 RM 250 FIT EASY AND NOT TO BAD TO WORK WITH . A COUPLE OF SMALL WRINKLES. NOT BAD FOR FIRST TIME
maybe will work if you have a flat surface, but the quad i tried it on has many curves. after spending a long time and forming it and getting it stuck on the fender, after about 20 mins it came off in the dips and moulds and turned loose where i wrapped it under the fender. I peeled it and trashed it and wrote it off as a waste of money. Now as far as dealing with motosport, entirely different story. On time delivery with several updates to let me know the status of my order. Top notch company. I will use them again.
super thick but easy enough to cut,and last a long time
Installation was straightforward and the graphics are flexible enough to stretch around moderate curves. Look out for small pieces of paper, etc., however, when applying graphics since the black backgrounds show all small "inclusions" under the graphics.
Also, don't try to put these on gas tanks since the tanks are porous enough for vapors to cause bubbles. This is not a fault of the graphics, however, but is a manifestation of the types of polymers used for tanks ... and this is the reason that gas tank graphics usually have "vent holes" in the graphics to allow vapors to escape rather than cause bubbles.
This is not the super thick stuff. If you want that, you'll have to pay more. I haven't crashed to attest to durability; but quality and thickness is good. White was nice and glossy. Cut yourself a template first with other paper. I used an exacto knife for the intricate cuts. BEWARE: if one item is not in stock, your entire order will be held up.
Good product, good luck laying it down without any bubbles.
I have black side panels and air box covers on my 2013 KX250F and they show scratches really bad so I thought I'd try the clear backgrounds out. When trying to apply the clear backgrounds it is next to impossible to keep from getting some finger print marks on the sticky side even with clean hands. Once I got one side done, I stepped back to check it out, and wished I had ordered the black ones. Took the backgrounds back off immediately and think I'm just gonna order the pre printed backgrounds instead. i think the colored backgrounds may be better, but I didn't have much luck with the clear ones.
The film is really good quality , easy to work with and great finish results.
I bought this to put on my 2013 crf450 gas tank to stop scratching it but these things do not stick well at all. The edges don't stick and because of the type of adhesive you get lots of tiny bubbles under the clear background. The adhesive actually sticks to the gas tank and the sticker lifts off of the adhesive, so I am left with adhesive goup on my tank. I have put many graphics on and this stuff is not good quality.
bought these backgrounds for the second time,only this time put one on the front nose of my quad and have to say that it was very easy molding it to the curves of the plastic,looks awesome on there
I have been using this product for years.Just take your time and use heat or warmer climate.works just fine! Nothing like spending time with your kids on cool projects.
Dirt Bike / ATV: 1-888-676-8853