For orders of $49.00 or more
Orders over $49.00 will receive free 3-day express shipping. This is a residential delivery service, with deliveries Monday through Friday from 9:00am to 8:00pm.
I have an 05 grizzly 660 dose the sport utility clutch kit work fine on a built motor? I see in the description it said designed for stock motors.?
22 days ago
Usually this EPI Sport Utility Clutch Kit would be recommended for a stock motor, but EPI does offer a 660 grizzly kit for machines with a big bore kit. (WE391070 and WE391083). If it is available through one of our suppliers, we would be happy to order it for you. Please contact one of our sales professionals to inquire about special orders and availability. ATV: 1-888-676-8853
Best epi clutch kit for 2009 Brute Force 750 with 29.5 Terminators, hmf exhaust and heavy duty belt already installed? Trail and mudd riding.?
2 months 2 days ago
Mudder Kit Designed for mud riding with aggressive lug tires Helps restore power loss due to addition of mud tires Better low end power and torque to get tires turning in the mud Quicker backshift which results in crisp throttle response Reduced belt slip and clutch heat
Sand Dune Kit Designed and tested specifically for sand dune applications Different kits for stock and paddle tires Helps hold peak power RPM when dune riding and climbing hills Better low end power and torque Quicker backshift which results in crisp throttle response Reduces belt slip and clutch heat
Economy For general trail riding Spring only kit, no clutch weights included Works with any tire size Improves belt grip and backshift
What all comes with this kit I need new wet clutch pads and figured I'd try to just upgrade and replace everything at once does the rollers springs and wet clutch pads all come in this kit thanks
1 year 9 months agoLocation: Portland, OR, USA
This kit would come with the required Springs, Sheave and Weights for your clutch. From what I can tell your clutch would not have separate clutch plates like you would find in most clutches. The "clutch carrier" assembly can be found separately in the OEM Parts Diagrams for your Grizzly here: http://www.motosport.com/utility/oem-parts/YAMAHA/1999/GRIZZLY-600-4X4/CLUTCH
chevytruck00732 years 2 months agoLocation: Saginaw, MI, USA
What size is primarily stock clutch spring?
Also looking to upgrade stock clutch
2 years 2 months agoLocation: Portland, OR, USA
Unfortunately i do not have the specs on the stock clutching as we are not an OEM Arctic Cat parts dealer. For proper clutch recommendations we would require some additional information. What type or riding do you do? What size tires are you running? What elevation do you tend to ride at? If you can give us a call with this additional information, we can help get you the correct clutch kit.
i have a 08 grizzly. it has itp wheels and 26 mudlites onit now. my belt is burnt up and rubber is all in the housing. im looking for a kit and belt for 26 inch tires but in the future i plan on upgrading to 27. i trail ride use it for pulling a small trailer when cutting wood. so the wood cutting involves some mud holes
2 years 3 months ago
We do carry various different belts for your 2008 Yamaha Grizzly 700. The EPI Sport Utility Clutch Kit Oversize Tires are based off of elevation so make sure to choose the correct kit and that you profile the make, model and year correctly.
I have a 2008 Yamaha Rhino 700fi. I have upgraded my exhaust, I have a K&N air filter, 105.5mm trinity racing big bore kit and a recent valve job. I seem to be losing my low end power at low RPMs especially up hills. I primarily trail ride, with some very occasional mudding. I have 26" tires and usually stay below 3000' elevations. Which kit should I buy? I believe the belt is original too but I can't be sure since I bought this rig second hand. Should I go ahead a change this out too, while I am in there?
2 years 3 months agoLocation: Portland, OR, USA
This would be a good clutch for your application This kit will help with bottom end performance lost from going with a larger than stock tire. The belt replacement will really depend on what condition the belt is in when you pull it apart. For ease of maintenance and peace of mind, it would not be a bad idea to install a new belt while you are in there.
wayne2 years 6 months agoLocation: Edmonton, AB, Canada
Looking for a clutch kit for 2005 king quad 700 27 tires also have a V.D.I ecu on this bike?
thinking the yellow spring but what weight rollers? and need a kit with a belt and springs for wet clutch
2 years 6 months agoLocation: Portland, OR, USA
This clutch kit for your 2005 King quad will come with the wet clutch springs and the correct spring and rollers that EPI has designated for the best performance. It will not include the belt and that will need to be purchased separately. In addition you will need to purchase the OEM inner clutch cover gasket and engine oil as it will need to be drained to replace the inner clutch springs.