For orders of $49.00 or more
Orders over $49.00 will receive free 3-day express shipping. This is a residential delivery service, with deliveries Monday through Friday from 9:00am to 8:00pm.
Complete engine sets of stack height controlled friction plates featuring the EBC unique alloy particle-impregnated clutch facings that prevent burn-up or slippage. Every CK kit is matched and measured to give you a perfect stack height.
Contains full set of friction plates.
Top quality friction material consisting of cork impregnated with aluminum particles.
Note: EBC recommends never trying to fit individual plates.
DirtyDurbOver 6 months agoLocation: Spring Valley, CA, USA
What else will I need?
Purchasing EBC CK Clutch Kit and springs what about:
Exhaust flange gasket?
I can't find these on your site
Over 6 months ago
You can find those gaskets in our OEM section for your Suzuki Intruder VL1500.
Will this clutch assembly fit an 82 honda cb750 dohc?
Over 8 months ago
Yes, Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct clutch kit for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
I have a 2001 honda 250 ex it has the auto clutch is this kit the right one for that bike or is there a difference is the clutch kit for a auto clutch then a standard clutch
Top 1 ContributorTop 50 Contributor
Over 11 months ago
Your Honda TRX250EX 2001 model ATV uses a manual clutch and a centripetal clutch. If the manual clutch plates are worn out this will be a great replacement. If you need the replacement centripetal unit, you will need to order the OEM:
hondaluvr1 year 6 months agoLocation: new haven,ky,usa
What is the best clutch i should go with when I do alot of trail ridding and mud playing?
1 year 6 months agoLocation: Portland, OR, USA
This EBC kit would be a great replacement for the OEM clutch plates. I would also recommend taking a look at the Barnett Complete Clutch Kit for your Honda TRX400EX.
MikeysDime1 year 7 months agoLocation: Glendale, AZ, USA
What would be the clutch kit # for a 2008 yamahe R6.?
I currently have Kevlar clutch friction plates in it now, but recently had a dealer do an oil change. and they used synthetic oil and now the cutch is slipping in higher RPM's. would it do any damage to the steel plates or would it be ok just to do the friction plates and springs?
Top 1 Contributor
Over 11 months ago
Unfortunately we at Motosport.com are not able to give you repair advice. We highly suggest that you purchase an OEM service manual for your machine and refer to it to answer your repair questions. If you need more assistance, please consult a local repair shop to further assist you in your repairs. If you need parts to assist in your repairs, we are happy to assist you with your parts order.
Cant get the tires to spin in the thick mud. Just bogs in 4wd High. 4wd Low will spin them but not enough rpms to fling mud out of the lugs. Will a clutch kit help?
1 year 10 months agoLocation: Portland, OR, USA
Unfortunately, with your Eiger being the foot shift model, there is not a lot you can do to help with the gearing issue. This clutch will not perform any differently than your stock clutch. The Eiger 400 just doesn't have enough power to turn 25" tires in the deep mud consistently.