For orders of $49.00 or more
Orders over $49.00 will receive free 3-day express shipping. This is a residential delivery service, with deliveries Monday through Friday from 9:00am to 8:00pm.
I have 07 Honda rancher 420 with 2 inch wheel spacer I have original hubs they r to weak for the wheel spacers
Top 1 Contributor
1 year ago
We're sorry, this product does not fit the ATV you selected. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct product for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Will these fit the lonestar racing ax caliber axle?
1 year 2 months ago
Yes, these Dura Blue Wheel Hubs will fit the stock OEM or aftermarket axle and the lonestar racing Axcaliber axle will fit the stock OEM hubs so you should have no problems running the Dura Blue Wheel Hubs on the Axcaliber axle.
Ryan1 year 10 months agoLocation: Brockway, PA 15824, USA
I have 300ex and was wondering what the 110 means because there is a hub that fits my atv too that is 4/115
1 year 10 months agoLocation: Portland, OR, USA
The "110" is actually the bolt pattern for the rear wheel. Normally Honda ATV's would use a 4/110 bolt pattern and that would be the hub you would want to get if you are looking to use your OEM wheels or any other 4/110 wheel.
I need a hub that accepts a shaft with 20 splines and an Outside Diameter of 0.9 inches.
1 year 11 months agoLocation: Portland, OR, USA
These are sized for specific ATV's. I do not have the actual spline count or dimensions on each of these as it would vary depending on what ATV the hubs are for. I would need to know the Year/Make/Model of your ATV to tell you if they would fit.
That would more than likely depend on the specific ATV the Hubs were made for. Unfortunately Durablue does not list the specific weight of each hub anywhere for me to reference. These would be lighter than the stock OEM hubs on any ATV though.
Gerad2 years 7 months agoLocation: Cincinnati, OH, USA
I have an aftermarket axle. It has 28 splines and I'm having a problem finding correct hub. Will these fit?
2 years 7 months agoLocation: Portland, OR, USA
If you can give us a call we are more than happy to help try to get you a set of hubs based on what axle you have. Typically the axles use the OEM hubs but some do use specific hubs. If you can let us know what axle you have we will do our best to help you out. These hubs are designed to fit stock axles and axles that accept the stock hubs.