Driven Racing D-3 Grips Kit

Silver/Black
Silver/Black

$51.26 $56.95
10% Off - Save $5.69

Description See Also: 16 Reviews 7 Questions
Item #DRR0008

Read More
16 Reviews
4.6 out of 5 stars
5 Star   11 4 Star   4 3 Star   1 2 Star   0 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Turbofanatic Verified Purchaser
West Olympia
Zx14 grips

It was semi-easy to install left grip by simply using hot water to make the rubber soft and little bit stretchy like , then same went for throttle , took about 5 min of removal and install after grips were warm enough and then it's go time !! Looks and feels great ! Good fitment and looks as well .

DannyBuzz Verified Purchaser
California
Too expensive for average quality

These grips aren't bad. But I wouldn't say they're great. Really hard to install and keep the metal pieces in place. They don't reduce vibration as well as they claim they do. Overall 3/5. They look badass. But I'll just stick with the rental grips next time around.

KinX Verified Purchaser
Good but I had to make it fit

It said that it would fit my 06 GSXR 750 but I had to file down the throttle to get it to fit and it was still a very tight fit

chelopr Verified Purchaser
Puerto Rico
Comfort nad good looking grips

I like tha replacement rubber is available and have good comfort.

Rowdy Verified Purchaser Top 500 Contributor
Hot Springs, AR, USA
Excellent grips.

Not only do these grips look awesome, they feel very nice and offer great grip even with no gloves. I highly recomend adding the Driven bar ends to complement them. I have read that they wear down faster than traditional rubber grips, but even if I had to replace them every year, I would.

Fezsquatch Verified Purchaser
Driven Racing grips-Yamaha FZ-09 installation

These feel great and look good too. Installation was as normal, and all you need is a little grip glue. The bar-ends required some modification which I will detail in a separate review of that product.

bigiron Verified Purchaser
Southern California
Easy to order

The product was easy to
Find / The description of
the product was self
Explanatory / Ordering
was a breeze and it got to
Me in a short time I give it
Two thumbs up.

Josh Verified Purchaser
WV
Awesome look, great fit/feel

I've had these on for just one ride so I can't say how long they will last. But they look awesome and were a breeze to install. I had to trim the throttle plastic down a little but NBD. Used a compressor to shoot air under the grips and they slid right onto the bars. Paired with Driven's bar ends these things look sick and feel great. Before I had some worn out P.O.S. grips that were held on with electrical tape- these are a dramatic improvement in comfort. No more carpal tunnel!!

poppa Verified Purchaser
D3 grips are very good

it took time after installing them to get some seat time due to a back surgery. but! after some good miles that would usually have my hand and right forarm numb from the vibration....im happy to say that i just started to experience the tingling after that distance! absolutely love these grips. it wont remove all the vibration. but it was far better than i thought it would be. 5stars from me for sure. and i did have to take my dremel and simply remove the outer lip of plastic sleeve so throttle grip would slide on. i suggest liberal dose of WD-40 and straight push. thanks driven for a wonderful product.

Dave Verified Purchaser
Washington, USA
Driven Racing D-3 Grips Kit

needed to trim the throttle grip end to make a fit. Otherwise ok.

01Katana600
Leesburg, VA, USA
2001 suzuki katana 600 FIT?

I love the gold color and style of these grips. When i checked it said i may need to shave my throttle down a little and in doing so. it never felt tight so i just applied some grip glue and that solved that problem.

CBRkat28 Verified Purchaser
Not sure about these yet.

I have yet to ride with these so I'll review the install. This was the first pair of grips I've replaced so that being said they either aren't easy to get on or I didn't use the best method, seem better than the stock ones though.

BlacknwhiteR1 Verified Purchaser
Mass
Driven D3 grips

Awesome grips easy to install and look superb!! Best way to install is with wd-40 do not twist grips push straight on trust me it worked beautifully on my 06 R1!

EzraRH Verified Purchaser
McDonough, GA, USA
Driven D3 grips

The best grips I have ever used, no more arm pump and the numbness I got with stock or other grips is gone!

Driven Racing D-3 Grips Kit
03r6 Verified Purchaser
Bloomington, MN
Love them

Love these grips they look amazing and feel awesome the only bad is if you use the bar strap if you trailer your bike the rubber tears a little but you can get replacements for cheap

unclebikerboy Top 250 Contributor
Kailua Kona, Hawaii
Match your Ride!

Like the title says you can match your ride with style with theses..if u have a blue blike..blue grips with any color combo and so..Drivien racing makes one of the best products!

7 Questions
Answered:   7
Not Yet:   0
Alpha
Location: Virginia, USA
Q: Will these fit a 2015 Yamaha R6? Without any mods?
1 year 7 months ago
MotoSportExpert
Expert MotoSport Staff
1 year 7 months ago
A: These technically are the right dimensions for your bike and should fit but, some bikes, but not all, have an OEM throttle tube design that contains a ridge or ridges on the throttle tube itself. In order to install any aftermarket grip besides the OEM replacement, these ridges must be removed. Common ways people remove them are by sanding or using a rotary tool, and least common of all is replacing the tube itself with an aftermarket throttle tube
Gilschorr
Location: Hong Kong
Q: Will these fit a Monster 620?
2 years 4 months ago
MotoSportExpert
Top 1 Contributor
2 years 4 months ago
A: Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct grips for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
banky01
Location: Ahmedabad, Gujarat, India
Q: Will it be a direct fit to 2012 Kawasaki ninja?
2 years 9 months ago
MotoSportExpert
MotoSport Staff Expert
2 years 8 months ago
A: Yes, this will fit you 2012 Kawasaki Ninja given you have the stock handlebar setup.
orange
Q: Will these or the d axis grips fit a g2 ergonomics 125 mm throttle tube?
Over 3 years ago
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: They will fit the tube but the grips are 5mm shorter than the length of the tube. If you can stand the small gap this will create between the grip and the throttle housing, then they will fit fine.
Shawn
Location: Georgia
Q: Will these fit an 06 cbr600rr?
Over 3 years ago
EzraRH
Over 3 years ago Location: McDonough, GA, USA
A: Yes they fit great, you have to sand down the throttle tube a little to get the grip on. When you remove your old grip make sure you clean the bar ends good with break cleaner. When you install the D3's give the inside of the grips a good soaking of the break cleaner and the bars and the grips will slide on and no grip glue need. On the throttle side will take a little more pressure to get on but they will slide on. They are the best grips I have used to date.
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: Yes they will fit, like the customer answer states, you will need to sand the throttle tube some and then they will go right on.
Jon2010
Q: Will these D3 grip work on my 2010 Kawasaki Ninja zx6r with no modifications?
Over 3 years ago
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: These technically are the right dimensions for your bike but, some bikes, but not all, have an OEM throttle tube design that contains a ridge or ridges on the throttle tube itself. In order to install any aftermarket grip besides the OEM replacement, these ridges must be removed. Common ways people remove them are by sanding or using a rotary tool, and least common of all is replacing the tube itself with an aftermarket throttle tube. The Kawasaki's are one of the bikes that do have these ridges.
Stef099
Location: Castel Frentano Province of Chieti, Italy
Q: This article : Driven Racing D-3 Grips Kit is compatible with buell xb9sx 2009? 9?
Over 3 years ago
Hello I wanted to know if the item Driven Racing D-3 Grips Kit is compatible with my bike model Buell XB9SX 2009, and although I can mount this on the knobs: Driven Racing Bar End Weights V2. Thank you.
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: The D3 grip is a 120mm grip and will work on your Buell XB9SX. The V2 bar end weight will also work in conjunction with the grips.
1-7 of 7