For a Suzuki DS80, will the bars fit? They are 7/8" mounts but does the mounting space fit as well?
asked 3 months, 17 days ago by cr250rr, on PRO TAPER XR50 HANDLEBARS
Yes, all 7/8th bars fit all 7/8th mounts.
answered 3 months, 11 days ago by Drewski, P+RTLAND
Does the stock throttleTube fit these bars?
asked 1 year, 11 months, 29 days ago by WillC, on PRO TAPER XR50 HANDLEBARS
I would need to know what bike you got to give you a definite answer. Normally all bars where the throttle tube goes are 7/8th diameter so you can still run all your stock controls. So if you have some sort of a off brand bike thats not a Kawasaki, Honda, Suzuki, Yamaha or KTM they might have a different bar diameter which would explain why the tube was too small for the new bars.
answered 1 year, 11 months, 28 days ago by Drewski, Portland, OR
Does the stock 07 CRF 50 Honda throttleTube fit these bars?
asked 1 year, 11 months, 27 days ago by WillC, WillC on PRO TAPER XR50 HANDLEBARS
Yes, your stock throttle tube will fit these bars just fine (actually, all throttle tubes are made to fit any/every set of bars with respect to their overall diameter for the controls, so you can essentially use any set of bars with any throttle assembly!)
answered 1 year, 11 months, 26 days ago by Darren77,
do these bars have a hole on the right side for the little metal piece on my throttle assembly to fit into
asked 1 year, 7 months, 24 days ago by mattc, pembroke MA on PRO TAPER XR50 HANDLEBARS
The bars have end plugs in them but they can be removed, and the 7 inch is measured from the lowest point of the bars where the clamps bolt to the bar.
answered 1 year, 7 months, 23 days ago by Drewski, Portland, OR
Will these bars at all fit a 2006 yamaha ttr 50 ? because my frined has them on his klx 110
asked 1 year, 4 months, 26 days ago by cp43, on PRO TAPER XR50 HANDLEBARS
What are the dimensions of these handle bars?
asked 1 year, 4 months, ago by trxfoefitty, on PRO TAPER XR50 HANDLEBARS
Height: 6.75 in (171 mm)
Width: 28.50 in (724 mm)
answered 1 year, 3 months, 17 days ago by Drewski, P+RTLAND
does it include bar pad?
asked 1 year, 2 months, 17 days ago by lees, on PRO TAPER XR50 HANDLEBARS
Yes, these bars come with a bar pad.
answered 1 year, 2 months, 11 days ago by Drewski, P+RTLAND
Cables?
asked 1 year, 2 months, 17 days ago by , on PRO TAPER XR50 HANDLEBARS
no you would need to order longer cables for the taller bars
answered 1 year, 2 months, 5 days ago by JesseC, Tualatin
do i need a new top triple clamp to put these bars on my xr 50?
asked 1 year, 2 months, 16 days ago by Jarbear, on PRO TAPER XR50 HANDLEBARS
Stock XR/CRF 50 clamps are welded on the stock handlebar. These Protaper bars will require a new top clamp for installation.
answered 1 year, 2 months, 10 days ago by james718, Portland, OR
Will these fit a 2007 crf 100f?
asked 1 year, 2 months, 3 days ago by tomfortier, on PRO TAPER XR50 HANDLEBARS
If your CRF100 has a top clamp to accommodate a standard 7/8" round bar than these should fit. If your stock bar is like the Honda CRF50 you will have to replace the top clamp.
answered 1 year, 2 months, 2 days ago by james718, Portland, OR
will these bars fit my off brand 50cc dirt bike
asked 8 months, 15 days ago by dirtbikerider123456789, on PRO TAPER XR50 HANDLEBARS
hard to say, they should if you are running 7/8th bars on it.
answered 8 months, 13 days ago by Drewski, P+RTLAND
Also Offered For...
You have selected a PRO TAPER XR50 HANDLEBARS. We have this item available for the rides below, click your ride to get one that fits!
