HP Tools Chain Breaker/Press Kit

2.00 out of 5 stars

Unfortunately, we no longer carry This item. It may be discontinued or have just sold out.

Please contact Customer Service (1-888-676-8853) or search for another product if you continue to see this message.

Browse All HP Tools Chain Tools

HP Tools Chain Breaker/Press Kit
HP Tools Chain Breaker/Press Kit
  • Description
  • Reviews (5)
  • Q&A (4)
  • HP Tools introduces an all-in-one chain breaker and press kit that is both durable and easy to use making maintaining your motorcycle and ATV chain a breeze.
  • For outstanding durability HP Tools constructed the chain press kit from heavy duty steel.
  • With a chain breaker set up included the HP Tools chain press kit truly brings everything together with one tool for chain maintenance.
  • To make service easy on multiple types of chains HP Tools made the chain press kit to work easily with rivet type master links.
  • By being compatible with most 420-520 motorcycle and ATV chains the HP Tools chain press kit fits nearly every application making it the perfect tool.
  • HP Tools includes a stylish nylon zipper carrying case to help keep all the pieces of the chain press kit together for easy storage and transporting.

Find More

2.0 out of 5 stars (5)
2.0 out of 5 stars
5 star 0
4 star 0
3 star   2
2 star   1
1 star   2
See Terms and Conditions
1-5 of 5
Overall 1 out of 5 stars
Location: Boise ID
toone
Total waste

This tool is so shoody built it stripped the threads on the 1st use. It was a total waste of my time and money. I was not able to push 1 pin out and had to buy another tool so i could put my bike back together

Overall 3 out of 5 stars
hondude450
HP TOOLS CHAIN PRESS

The HP TOOLS CHAIN PRESS works good. There is a learning curve to the using the tool, with out bending the pin. Which can happen easy.

Overall 1 out of 5 stars
Location: Rockingham. NC
bigdaddylongstroke
Worst chain breaker ever

I purchased this tool then used it to take the links out of a stock chain, the needle bent. Pressed the rivets into the masterlink the needle on the pressing tool ended sinking into the tool. Then went to go press the rivets on the needle bent again. All in all i wouldnt buy on of these unless they were selling them for 5 dollars shipped

Overall 3 out of 5 stars
Location: Racine, WI
vwsandman
HP Tools, it works, could be better.

Used this chain to break and then rivet some DID 520 o-ring chain, unit broke the chain with no issues, and it riveted the chain, but I wish it had come with some instructions, the black adapter in the kit looks like it is to be used to help press the chain together so you can then rivet the chain, but it does not work. Nothing broke and I was able to rivet my chain, but this tool needs instructions, maybe more parts, and there is no support that I can find for HP tools on the web. If you only have to break and rivet a chain every now and then, this will do the job. If you have a shop, look for a better tool.

Overall 2 out of 5 stars
Location: Jacksonville, NC
aiken71
Rivet

very heavy duty, only problem is some of the parts it comes with don't fit on it and the needle to rivet a chain bends no matter what pressure you put on it. go with a DID chain press and rivet tool if you need one, a little more money now but a lot less of a headache in the long run.

1-5 of 5
Total Questions (4)
Questions with answers:
  4
Questions without answers:
0
drzadam Location: Colorado
1-4 of 4
jrjr Over 5 years ago
Which attachment is used to flare the rivets?
Not sure which attachment to use to flare the rivets. The instructions only tell how to break the chain.
MotoSport Staff Expert
Over 5 years ago
hondarob
if you look at the picture on our site, the gray attatchment with the half moon on the end, the one in the middle of the case is the one to flare out the rivets
mlwmacon Over 6 years ago
Can i buy additional pins for this tool?
MotoSport Staff
Over 6 years ago Location: Portland, OR
Drewski
Yes, we can order in replacement pins.
crazychris Over 6 years ago
Will this work on adid racing chain?
i have a 525 erv x-ring racing chain and was wondering if this tool will do the job of puting the rivet master link on?
MotoSport Staff
Over 6 years ago Location: Portland, OR
Drewski
You shouldn't have any issues using this chain press with that chain.
drzadam Over 6 years ago Location: Colorado
Will this work to rivet a DID masterlink?
I have a 520VT DID chain and it only came with a Rivet (ZJ) type link. I want to get the right tool for the job, but the DID tool is too expensive. Will this tool work to correctly rivet the DID masterlink? Also, does it cut chain?
MotoSport Staff Expert
Over 6 years ago
Action
It will do both tasks for your chain.
1-4 of 4