When your OEM number plate needs to be replaced the UFO front number plate is a less expensive and more durable option that is built to OEM specs

  • Better & less expensive than OEM plastic, UFO has become the industry standard.
  • Available in OEM, exact colors, or optional colors.
  • Pre-drilled.
  • Made in Europe.
  • Colors & shapes may vary.

    • UFO FRONT NUMBER PLATE

    Our Price: $24.99
    To purchase this part, please select a ride:
    Select from rides that fit this product

    You May Also Need...

    FACTORY EFFEX FACTORY NUMBERS 7
    FACTORY EFFEX FACTORY NUMBERS 7"
    Price: $6.99
    UFO MUD FLAP - BLACK
    UFO MUD FLAP - BLACK
    Price: $12.99
    Retail Price: $15.99
    You Save: $3.00 (19%)
    BOLT JAPANESE TRACK-PACK II
    BOLT JAPANESE TRACK-PACK II
    Price: $15.99
    UFO FORK GUARDS
    UFO FORK GUARDS
    Price: $29.99 - $44.99
    Overall:
    3 out of 5
    3 out of 5
    Location: La Quinta, CA
    Ehhh, it's okay i guess...
    " I mean it's white plastic, hard to complain too much. Unfortunately the strap that wraps around the bar is way too short to actually connect - about 3" too short. Not sure what UFO expected us to do with half a strap. Otherwise the plastic looks pretty much like original. Should hold up fine. I will find a way to extend the strap to go around bar and pad - but would be nice if UFO did it for me! "
    Overall:
    5 out of 5
    5 out of 5
    Location: Massillon, Ohio
    Good
    " Great quality and fit... I use strictly UFO plastic products, I added this fender to my 96 Yz 250 to update the look a little and compared it to my OEM 450 plate and it matches to the T. Price and quality are hard to beat! "
    Overall:
    1 out of 5
    1 out of 5
    Location: Not Available
    Doesnt Fit
    " It looks like the OEM except for when you put it on. The bottom fits in but the top strap DOES NOT fit around the handle bar pad, it is not long enough. "
    Overall:
    2 out of 5
    2 out of 5
    Location: Not Available
    Plastic is okay,but no clasp for handle bar
    " I should have bought a OEM front number plate. It does not have a clasp to hold down strap on top of front number plate. I had to use a zip tie to hold in place. I was very disapointed and I will never buy UFO plastics again. I have bought UFO plastics in the past and they used to superior to Acerbis, but not anymore. Next time I will buy Acerbis or OEM. I do not recomend. "
    Overall:
    4 out of 5
    4 out of 5
    Location: O'Neill NE
    Good but a better strap would be nice
    " For the most part it's fine, but mine didn't have anywhere to hook the strap that wraps around the bar pad to. I drilled a couple holes and used zip ties to fasten it in place. You'd have to look very closely to notice. Overall it's a good product. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Pueblo, CO
    Fits
    " Does the job of being a number plate. holes drilled correctly but the strap was WAY to short. ended up cutting the whole strap off to match the other side. Looks good. Thick and strong but strap didnt even fit without bar pad. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Phoenix, AZ
    Good, but short strap
    " I have an older UFO number plate for my 1990 CR250, and wanted a replacement. The new one has a very short strap, and won't fit around the bar pad. Heck, it barely fits around the bar itself. Everything else about it, the mounting tabs, bolt home, look, and finish are great, but the strap is way too short. Not sure when UFO changed this, but it's definitely different than my last one. "
    Overall:
    2 out of 5
    2 out of 5
    Location: Not Available
    " The only way they expect you to fold over the top plastic flap which wraps around the bar pad is with a zip tie. Terrible design, buy oem. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Not Available
    Good part but flawed
    " Overall it is a good part, the only problem is the strap that goes around the bar pad is not long enough to even get half way around the pad let alone go around the pad and then clip back on the number plate. I just trimmed it off with a razor blade and will us it without the strap. "
    Overall:
    4 out of 5
    4 out of 5
    Location: tucson AZ
    number plate
    " the fit is pretty good and seams to hold up well. good replacement for OEM part. "
    Overall:
    5 out of 5
    5 out of 5
    Location: Texas
    No complaints
    " It fit well, and it has a good style to it. No complaints. "
    Overall:
    4 out of 5
    4 out of 5
    Location: Creswell, OR
    Looks Great
    " The only complaint I have about this number plate is the bracket hole on the bottom. I had to take a file and expand it so the brake line bracket would line up right. Looks sweet! "
    Overall:
    5 out of 5
    5 out of 5
    Location: Neagunee, MI
    good buy
    " i got this in black for my 95 yz250 and it fit perfectly, didn't have to drill anything. looks good and seems to be holding up just fine. haven't had it on for long, only a few rides, but it seems to be doing the job. "
    Overall:
    2 out of 5
    2 out of 5
    Location: Tacoma, Wa
    Disappointed
    " As soon as I took the number plate out of the package I knew that I was not going to be happy with the product. Its nothing like the OEM plate. There is nowhere to connect the strap to go around the bars. CR250. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Not Available
    " Good replacement, but funcky return at the crossbar "
    Overall:
    5 out of 5
    5 out of 5
    Location: kansas city,ks
    awesome!
    " this thing just looks good! fit perfect and was a snap to install. "
    Overall:
    2 out of 5
    2 out of 5
    Location: Not Available
    " pretty bad. bought this in black for my 06 kx250f the bolt hole on the top is way to far up and i had a hard time fitting it on. has a square about half the size of the plate etched in it. other than that it looks great "
    Overall:
    1 out of 5
    1 out of 5
    Location: Savannah, GA
    Total garbage
    " This plate doesn't match the 2009 RMZ450 plastic at all! It also doesn't fit and broke when I started the bike. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Austin, Tx
    Kind of Junky
    " I got this thinking it was like the one in the photo, see the hole in the front of the plate in order to screw/bolt the number plate to the bike...yeah that's not there! I have a 2001 YZ250F and it was the one feature, if you can call it that, that I wanted to that I didn't have to safety wire the plate to my bike. So I gave it a 3 star because the qaulity is there but I was slightly misled. "
    Overall:
    5 out of 5
    5 out of 5
    Location: vancouver, BC, Canada
    Perfect green colour
    " Have you ever bought green plastics from other plastic companys? i have and i have found that the green does not match the oem kawi green. Ufo green looks the best hands down. It is the exact green that monster procircuit kawasaki uses. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Florida
    UFO number plate
    " There is one problem with this plate. The strap for the cable guard is not long enough to come around and tie back to the plate like the stock one. You have to use a tie wrap to tie it off to the handle bar. "
    Overall:
    5 out of 5
    5 out of 5
    Location: Norman OK
    Great Fit Great Product
    " This plate fits perfect, just like OEM. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Illinois
    Fit is okay
    " The only problem I have with this number plate is that unlike the OEM part there is no way to attach the plastic tab that goes around the handlebars. I had to drill a couple of little holes to thread a zip-tie through. I would look into Acerbis or OEM next time, even if it is a few bucks more, for that cleaner look. "
    Overall:
    1 out of 5
    1 out of 5
    Location: Knoxville TN
    Not for KX125
    " i bought this plate for my kx125 it didnt fit,WTF the bolts doesnt line up this number plate SUCKS!!!! "
    Overall:
    5 out of 5
    5 out of 5
    Location: Brentwood Ca. 94513
    Exact fit!!
    " Number plate fit perfect, looks nice.... quick delivery ! "
    Overall:
    5 out of 5
    5 out of 5
    Location: Western, NY
    Matches OEM
    " Haven't installed it yet, but laid on top of the one I just removed it looks like an exact match. "
    Overall:
    4 out of 5
    4 out of 5
    Location: Cumming GA
    Good replacement
    " Bought for my 04 CRF250R and bolted right up but the handlebar strap didnt have a whole to fasten it backwards. Looks great and fits just like the original. "
    Overall:
    1 out of 5
    1 out of 5
    Location: Texas
    " Number plate fits but top strap has only 1 hole with no way to lock it on. Had to use zip ty to strap it to handlebars. Poor design. "
    Overall:
    4 out of 5
    4 out of 5
    Location: Pascoag, RI
    buy acerbis
    " when it comes to plastics I definitely prefer UFO over the other brands. aside from the UFO decals, you cant tell them from stock. other brands like acerbis mold their logos on the insides of the front fenders and the top of the rear fender. I dont like that, especially if you are trying to pass a bike off as stock for selling purposes. now heres the only problem with UFO... the front number plates for some strange reason always have the crossbar tab with nothing to mount it to. there is no slot inside so you have to either zip tie it or cut it off like most people do ACERBIS is just like stock. it has the tab built into the plate and requires no modifications. its one of the only things acerbis makes better than ufo and they actually DONT mold their name onto the front plate like the rest of their stuff. bottom line... buy an acerbis front number plate "
    Overall:
    3 out of 5
    3 out of 5
    Location: Monroe, GA
    " doesnt have a plac e for the wrap around the bars to connect on back of plate like the factory one not impressed "
    Overall:
    3 out of 5
    3 out of 5
    Location: Tuscaloosa, AL
    Kinda Weak
    " For a kx 65, the plate fit well but had no way to attach around the bar pad. Ended up using a zip tie. It worked out, but just seems chessy. This should be improved. "
    Overall:
    5 out of 5
    5 out of 5
    Location: Orange County, CA
    Great OEM replacement
    " No issues with the number plate. Fits as OEM replacement exactly. "
    Overall:
    5 out of 5
    5 out of 5
    Location: Cartersville, GA
    Great Front Plate
    " I bought this plate for my klx 125L because we were doing a kx 85 front fork conversion and it worked perfectly. Its been slammed against a tree and nothing but a few scratches and that was it. Very Durable "
    Overall:
    5 out of 5
    5 out of 5
    Location: delano,california
    very authentic
    " i love my ufo number its same as stock i give it 5 stars. "
    Overall:
    5 out of 5
    5 out of 5
    Location: MT
    Almost Perfect
    " Fit and finish is great although I couldn't figure out where the upper wrap around tab was supposed to go. I cut if off like everyone else seems to do. "
    Overall:
    4 out of 5
    4 out of 5
    Location: Springdale, AR
    Nice plate...
    " Great quality, bought this for a CRF250X...the website listed this as a fit, but there is no mounting kit for it so I had to improvise. It looks good, but didn't bolt on as expected. "
    Overall:
    5 out of 5
    5 out of 5
    Location: berkley springs
    number plate
    " this fits just like the stock one very easy to put on also and it matched the stocker color also but its white so it should be hard to match lol "
    Overall:
    1 out of 5
    1 out of 5
    Location: nashville Tn
    " It did not fit and it did no have a pin to hold the strap. And i needed it 4 the weekend and didnt get to use it!!!!!. Do not buy ufo number pl8. =( "
    Overall:
    2 out of 5
    2 out of 5
    Location: Athens, PA
    Should have got a stock one
    " The title says it all. I got this for my CR 250 and it did not have a mounting tab for the bar strap. I had to drill some holes and use a tie-rap. "
    Overall:
    4 out of 5
    4 out of 5
    Location: n.j.
    good fit
    " overall good looking product.fits my 98 kx 250 well.even though i have a fender from a different manufacture. "
    Overall:
    3 out of 5
    3 out of 5
    Location: Taylor, MI
    looks good
    " The black number plate looks good, but the strap on the top dosn't work like OEM. I had to use a tie-wrap to secure it. "
    Overall:
    1 out of 5
    1 out of 5
    Location: Haleiwa, HI
    Does not work for CRF250x
    " Beaware, this item does not fit the 2004 Honda CRF 250X. There is only one hole on the top and one on the bottom to connect it to the triple clamp. CRF 250x's require plates with 2 holes. "
    Overall:
    2 out of 5
    2 out of 5
    Location: washougal, wa
    " my number plate came with nowhere for the strap to tie to. it had no pin on the backside to hold it, so i cut it off, "
    Overall:
    5 out of 5
    5 out of 5
    Location: Pleasanton, CA
    Good Fit and Good Price
    " The UFO front number plate fits very well and feels stronger than stock. Best price around. "
    Overall:
    5 out of 5
    5 out of 5
    Location: Wasilla Alaska
    UFO Products
    " All the UFO products I have purchase fit great...look great. Buy with confidence! "
    Overall:
    5 out of 5
    5 out of 5
    Location: Lakewood, CA
    Super buy!!!
    " Best plastics around!!! Awesome pricing for stock like plastics!!! "
    Overall:
    4 out of 5
    4 out of 5
    Location: pinch, WV
    number plate
    " good purchase for the price. it doesnt fit as good as oem but is alot less money "
    Overall:
    5 out of 5
    5 out of 5
    Location: Port Angeles, WA
    ready as it comes
    " Best purchase ever! comes ready to install! with more than a reasonably price "
    Will this fit an '06 Kawasaki KDX 200?
    Asked by kdxer, nc
    No, we do not carry a UFO front number plate for that bike. Your only option would be an OEM one.
    Answered by Drewski, Portland, OR
    is this front number plate OEM standards?
    Asked by kruse123
    Yes, these are pretty much OEM Specs.
    Answered by Drewski, P+RTLAND
    can i get thfis plate in blue for my yamaha?
    Asked by potato
    To confirm that if it is available blue for your Yamaha you would have to profile the correct year, make & model. So feel free to contact us, profile your bike online and it will let you konw the color options that are available for your Yamaha.
    Answered by Mike24, Motosport

    Dirt Bike

    Honda

    Honda CR125
    Honda CR250
    Honda CR500
    Honda CR80
    Honda CR85
    Honda CRF150R
    Honda CRF250R
    Honda CRF450R
    Kawasaki

    Kawasaki KLX110
    Kawasaki KX100
    Kawasaki KX125
    Kawasaki KX250
    Kawasaki KX250F
    Kawasaki KX450F
    Kawasaki KX500
    Kawasaki KX60
    Kawasaki KX65
    Kawasaki KX80
    Kawasaki KX85
    KTM

    KTM 125SX
    KTM 200MXC
    KTM 200SX
    KTM 200XC
    KTM 200XCW
    KTM 250MXC
    KTM 250SX
    KTM 250XC
    KTM 250XCW
    KTM 300MXC
    KTM 380MXC
    KTM 380SX
    KTM 400MXC
    KTM 400RXC
    KTM 400SC
    KTM 400SX
    KTM 450MXC
    KTM 450SX
    KTM 450XC
    KTM 520MXC
    KTM 520SX
    KTM 525MXC
    KTM 525SX
    KTM 620SX
    KTM 85SX
    Suzuki

    Suzuki DRZ110
    Suzuki RM125
    Suzuki RM250
    Suzuki RM65
    Suzuki RM80
    Suzuki RM85
    Suzuki RMZ250
    Suzuki RMZ450
    Yamaha

    Yamaha YZ125
    Yamaha YZ250
    Yamaha YZ250F
    Yamaha YZ400F
    Yamaha YZ426F
    Yamaha YZ450F
    Yamaha YZ80
    Yamaha YZ85

    MotoSport.com - The Guys That Ride!