When your OEM fork guards needs to be replaced the UFO fork guards are a less expensive and more durable option that is built to OEM specs.
  • UFO Plastic has become the standard in replacement off-road plastics because they are better in quality and less expensive than OEM plastics.
  • Pre-drilled from the factory for easy installation.
  • Available in a variety of colors including OEM colors.
  • Image is for reference only, actual product may vary.

UFO FORK GUARDS

Price Range: $29.99 - $44.99
To purchase this part, please select a ride:
Select from rides that fit this product

You May Also Need...

UFO MUD FLAP - BLACK
UFO MUD FLAP - BLACK
Price: $12.99
Retail Price: $15.99
You Save: $3.00 (19%)
UFO FRONT DISC GUARD
UFO FRONT DISC GUARD
Price: $19.99
Retail Price: $27.99
You Save: $8.00 (29%)
BOLT JAPANESE TRACK-PACK II
BOLT JAPANESE TRACK-PACK II
Price: $15.99
UFO FRONT NUMBER PLATE
UFO FRONT NUMBER PLATE
Price: $24.99
Overall:
3 out of 5
3 out of 5
Location: Evergreen, Colorado
Not Set of For Speedometer Cable
" I got these for my 06 WR450F and the guard on the right side isn't set up for the speedometer cable like the OEM guards. It doesn't fit so I am sending it back. As long as you don't have a speedometer / trip on your bike then they probably work just fine. "
Overall:
5 out of 5
5 out of 5
Location: Dayton, OH
Fits and looks great
" Fit perfectly and looks amazing...haven't had a chance to ride due to weather. "
Overall:
5 out of 5
5 out of 5
Location: Ormond Beach, Fl
Fork Gaurds
" Fit great very happy with the product "
Overall:
5 out of 5
5 out of 5
Location: Not Available
great replacement.
" these are great replacements. They look just the same as stock and are just as durable. they are cheaper and go on pretty easy. def recommend "
Overall:
4 out of 5
4 out of 5
Location: San Jose
" I just changed from stock white to black! although i bought fork graphics and didnt fit like stock!! "
Overall:
4 out of 5
4 out of 5
Location: Pueblo, CO
Good Product
" Thicker than stock, seems more white than stock. Fits great, holes drilled correctly. Ridges on plastic make it hard for graphics to stick good. "
Overall:
5 out of 5
5 out of 5
Location: Orange County, CA
Black UFO Fork Guards - Awesome
" I was super stoked when I got my new black UFO Fork Guards. I swapped all my plastics to black and needed a set of fork guards for my CRF250X that supported the odometer bracket. These fork guards come with the factory impression so that you can rivet the stock clamp to the new guard like factory! I drilled the clamp off my stock guard and used some rivets that I got from Lowes. I am super stoked on these guards, they are way better than the ones that Acerbis makes! "
Overall:
5 out of 5
5 out of 5
Location: austin mn
happy with my purchase
" they bolted on no problem, decals look sharpe with them. makes my bike look alot better! "
Overall:
5 out of 5
5 out of 5
Location: albany ny
good fit
" these were a perfect fit on my CR 250.....isn't really much more to say "
Overall:
5 out of 5
5 out of 5
Location: HAMBURG NY
great ufo product as always
" Not much to screw up here standard issue fork guards although white not black. Bolted right up had to flex em a bit to get the bolts lined up no big deal graphics lined up ok id say stick with ufo for aftermarket plastic "
Overall:
1 out of 5
1 out of 5
Location: Hampton, Va
Didn't Fit
" Purhased these for my '08 KX450F and the guard for the left fork did not fit properly. Once installed, the top of the fork guard would only cover about half of the fork. I determined that this was due to the 3 mounting holes not being drilled out properly. Motosport kindly sent me another pair of guards to remedy the problem. The second pair had the same problem. After sending both pairs back, I ordered a different brand (Polisport) and they fit perfectly. Motosport was very helpful and I will definately order from them again. Just not this product. "
Overall:
3 out of 5
3 out of 5
Location: Elk River, MN
yz426f
" The surface feels like sandpaper, not very smooth. They aren' t even drilled for the factory hardware, but can be modified so they are average. "
Overall:
5 out of 5
5 out of 5
Location: Dallas, Tx
UFO Fork Guards
" I have purchased multiple UFO plastic replacement parts. They all fit, and work well. I have yet to be disappointed. "
Overall:
5 out of 5
5 out of 5
Location: glenpool ok
awesome
" Got these for my yz125 in black and they fit perfect. "
Overall:
5 out of 5
5 out of 5
Location: Neagunee, MI
Awesome
" got them for my 95 yz250 and they fit perfectly. no issues at all. highly recommended! "
Overall:
5 out of 5
5 out of 5
Location: Tucson, Arizona
Great OEM Replacement
" I replaced the white stock ones with black. They changed the whole look of the bike. I have a YZ250F and they went on without any problems. The fit was excellent. "
Overall:
1 out of 5
1 out of 5
Location: Colorado Springs, CO
Don't fit
" This is the second time i've bought fork gaurds from this site and the second time I got gaurds that don't fit at all. Bought some gaurds for my YZ125 didn't fit, now I bought some for my RM125 and they also aren't even close to fitting, none of the holes match up. "
Overall:
3 out of 5
3 out of 5
Location: Not Available
" bought a set in black for my 06 kx250f. one bolt hole on each side doesnt line up. other than that they're great "
Overall:
5 out of 5
5 out of 5
Location: snohomish WA
nice stuff
" i have never been a big fan of ufos products but it was my only option on these fork guards. when i got the fork guards i was pleasently surprised they cam ith everything to mount up to my bike as well as the clamps that go on the fork leg to guide the guards. these have held up well and i would buy again "
Overall:
5 out of 5
5 out of 5
Location: Norman OK
They Fit Great and Look Awesome
" These fork guards fit as tight as the OEM!!!! "
Overall:
5 out of 5
5 out of 5
Location: Fort Lauderdale, Florida
Good Product
" I bought a pair of these for my 2007 CRF 450. No complaints. Fit great. "
Overall:
5 out of 5
5 out of 5
Location: Ashburn, VA
UFO FORK GUARDS
" Just as good as the OEM guards, the holes lined up perfectly, and the black looks great!! "
Overall:
3 out of 5
3 out of 5
Location: HAWAII
Careful
" Nice product, but beware, you gotta figure a way to tie down your cable. I just simply drilled holes and used a tie strap. "
Overall:
5 out of 5
5 out of 5
Location: San Jose, CA
Sick fork guards
" The black ones look great on my yz and perform and hold up to trail riding and mx great "
Overall:
5 out of 5
5 out of 5
Location: Not Available
" this fork guard fits on the bike very well, it was easier to get this plastic on than any other plastic i put on my bike, and it looks great "
Overall:
4 out of 5
4 out of 5
Location: unionville, mo
2007 wr450f
" these guards do not have the clamp for the speedo wire! also the set i got were a little scuffed up. think i'll just drill a couple little holes, run a black zip tie for the speedo wire and keep'em. "
Overall:
5 out of 5
5 out of 5
Location: Not Available
Pain
" Super nice plastics but if your front end hasn't seen maintenance on the breaks in a while it is going to be a pain to break it all down. I would change the front tire while I was at it because it has to come off anyways. "
Overall:
5 out of 5
5 out of 5
Location: Not Available
Good plastic
" Great fit and good heavy plastic! "
Overall:
5 out of 5
5 out of 5
Location: cashmere, wa
fork guards
" they fit great on my cr 125 two stoke. glad they come in black it makes the bike look brand new "
Overall:
5 out of 5
5 out of 5
Location: 209. California
ufo fork guards
" These fork guards are shaped exactly like the stock. They come in every color and were a perfect fit. I recommend them to anyone looking for a replace or a new color change. "
Overall:
2 out of 5
2 out of 5
Location: Not Available
Not very good
" bought for my 2006 Kx 250 and they didnt fit very good . i had to remove the metal inserts just to get them to fit. "
Overall:
5 out of 5
5 out of 5
Location: Mid, Michigan
Comes with the T/ Clamps
" perfect fit, if your tire or roosters ate up your old ones, get them. , Buy the black, looks stealer or if you need some. 01' KX250 "
Overall:
5 out of 5
5 out of 5
Location: Dallas,Tx
Hard to find
" Better than factory and less than half the price. "
Overall:
5 out of 5
5 out of 5
Location: billerica, ma
awsome
" bolt right up, i love to have a clean look and just put these on my yz250 and crf450 and it completed the look. nice and clean. id take ufo over any other plastic company any day "
Overall:
2 out of 5
2 out of 5
Location: Not Available
Good but they dont fit
" In the description they say they fit a 08 Yz450 but they don’t. "
Overall:
5 out of 5
5 out of 5
Location: Centerville In
works and fits great
" this produst is awesome fits great and works even better "
Overall:
5 out of 5
5 out of 5
Location: Taylor, MI
good replacement
" These fork guards look good, and they fit good too. "
Overall:
4 out of 5
4 out of 5
Location: belleville mich
best buy
" great oem replacement easy to install and great buy "
Overall:
5 out of 5
5 out of 5
Location: michigan
GOOD PRODUCT
" These look good on my bike good color and quality.Best for the money "
Overall:
5 out of 5
5 out of 5
Location: Newark, CA
These are great
" and look and seem stronger then the original factory ones "
Overall:
3 out of 5
3 out of 5
Location: Kihei, Hawaii
ufo
" it didnt match up perfectly with the holes on the bottom of the forks. I made it work, but their cool. "
Overall:
5 out of 5
5 out of 5
Location: Sulphur Springs, TX
Good Product!
" We purchased this to replace an OEM product. This was really good quality! "
Overall:
5 out of 5
5 out of 5
Location: PA
A Lot Better Than Stock
" This is another great product by UFO - stronger than stock, whiter/more clean appearance and have thus far stood up to my abuse. "
Overall:
5 out of 5
5 out of 5
Location: Wasco, OR
Excellent product
" Awsome fit, injection molded and tough as nails!! These things laugh at roost and rock gardens!! "
Overall:
4 out of 5
4 out of 5
Location: 01040
A bit ruff
" I just recently bought these to convert my wr into a yz, all the other UFO plastics were very well made but these just seemed a bit cheap and had a ruff finish to them like sand paper. They are very durable don't get me wrong, just not OEM finish quality. "
Will this fit perfectly to my kx100 or will i have to adjust it a little?
Asked by KawasakiKX100, Tucson, AZ
I have a cr125 and no adjustments were needed with mine. Its an excellent product in my opinion, with perfect fitment.
Answered by HouTxtreme
These guards don't look like the one's on my 89 yz 250. Will they work?
Asked by pudski
The image shown is just a general product picture for the item. So as long as you profile your bike correctly the should be the correct guards
Answered by Drewski, Portland, OR
Do these come with the sliders that they run inside of that mount on the fork? Or are they just the lower sections , i need the upper and lower piece!
Asked by Phansm72
If you bike requires the fork guard sliders they will be included.
Answered by james718
Do these fork guards come with a brake line mounting tab? 2003 KX125
Asked by firffighter
These fork guards will have the little tab to attach the brake line guide, but it will not include the guide itself, your supposed to use your OEM one.
Answered by Drewski, P+RTLAND
can i buy one istead of a pair
Asked by kcin
These are only sold in pairs, that's how they come packaged from UFO.
Answered by james718, Portland, OR
If you need only 1 you will have to go with OEM. These are only sold in pairs. Depending on what bike you have Acerbis sometimes sells them individually.
Answered by Drewski, P+RTLAND
Does the kit for the 2002 KX250 include the rings to attach to the forks?
Asked by Ahochau
Yes they do.
Answered by james718, Portland, OR
why can't i find any that'll fit my yz 85?
Asked by Motokid27, Winner, SD
because we do not carry them for the YZ85 but we can special order them.
Answered by JesseC, Tualatin
are these shaped the same as stock fork guards so that graphics will fit
Asked by bdowd
Yes, they have the same shape as stock.
Answered by Drewski, P+RTLAND
yes thay are the same
Answered by billyw, elwood in.
will these work on a 96 rm250?
Asked by sparkie90
i do not carry them for you bike
Answered by hondarob

Dirt Bike

Honda

Honda CR125
Honda CR250
Honda CR500
Honda CRF250R

Honda CRF250X
Honda CRF450R
Honda CRF450X
Kawasaki

Kawasaki KX100
Kawasaki KX125
Kawasaki KX250
Kawasaki KX250F
Kawasaki KX450F
Kawasaki KX500
Kawasaki KX80
Kawasaki KX85
Suzuki

Suzuki RM125
Suzuki RM250
Suzuki RMZ250
Suzuki RMZ450
Yamaha

Yamaha WR250F
Yamaha WR400F
Yamaha WR426F
Yamaha WR450F
Yamaha YZ125
Yamaha YZ250
Yamaha YZ250F
Yamaha YZ400F
Yamaha YZ426F
Yamaha YZ450F

MotoSport.com - The Guys That Ride!