The Turner Steel Chain and Sprocket Kit is an easy and affordable way to replace your OEM sprockets and chains in one easy purchase!

  • The Turner Steel Chain and Sprocket Kit includes a Turner front sprocket that is made of heat treated, and hard finished, high quality steel that will stand up to the abuse.
  • The Turner Steel Chain and Sprocket Kit includes a Turner rear sprocket that is made of the same heat treat and hard finished steel used in the front sprocket which will last much longer than a comparable aluminum sprocket.
  • The Turner Steel Chain and Sprocket Kit includes a DID Standard 120 link chain that is pre-stretched to optimize performance and extend the lifespan of the chain.
  • Other chains are available with this kit (prices may vary) .
  • Image is for reference only, actual product may vary.

Profile your ride with our ride selector to select the Turner Chain and Sprocket Kit for your motorcycle or ATV.

TURNER STEEL SPROCKET & CHAIN KIT

Price Range: $49.99 - $69.99
To purchase this part, please select a ride:
Select from rides that fit this product

You May Also Need...

TAG SPROCKET BOLT KIT
TAG SPROCKET BOLT KIT
Price: $15.00
SILKOLENE PRO CHAIN LUBE - 14 OZ
SILKOLENE PRO CHAIN LUBE - 14 OZ
Price: $13.99
TURNER CHAIN ROLLER
TURNER CHAIN ROLLER
Price: $13.99
Retail Price: $14.99
You Save: $1.00 (7%)
OEM CHAIN GUIDE BLOCK
OEM CHAIN GUIDE BLOCK
Price: $11.61 - $64.69
OEM CHAIN SLIDER
OEM CHAIN SLIDER
Price: $11.76 - $54.03
Overall:
3 out of 5
3 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
3 out of 5
Style out of 5
Durability:
4 out of 5
Durability out of 5
Performance:
4 out of 5
Performance out of 5
Location: Tallassee, AL
Good Buy For The Workin Man
" Chain works well and seems durable. Rear sprocket was steel, expected aluminum, but it will wear well. Front sprocket fit splines but did not tighten with OEM Honda bolt and spacers/washers due to difference in sprocket design. Kept old front sprocket on. "
Overall:
4 out of 5
4 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
3 out of 5
Style out of 5
Durability:
4 out of 5
Durability out of 5
Performance:
5 out of 5
Performance out of 5
Location: El Paso, TX
drive combo
" i ordered this combo for a 09 crf450r. i dont like the front sprocket very much, there is no flat ridge on either side of the sprocket for the washer to press up against but its held tight so far. i also ordered with the standard 520 DID chain. i keep it lubed and clean but it still tends to stretch after every few rides. other than that i have no complaints. "
Overall:
4 out of 5
4 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
3 out of 5
Style out of 5
Durability:
4 out of 5
Durability out of 5
Performance:
4 out of 5
Performance out of 5
Location: rigby, ID
sprockets
" went to a 13-52 on my crf 450. chugs like a tractor. these new sprockets are durable and seem to work well. "
Overall:
1 out of 5
1 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
1 out of 5
Style out of 5
Durability:
3 out of 5
Durability out of 5
Performance:
4 out of 5
Performance out of 5
Location: Everett wa
Not a good fit for 98-02 kx250
" Rubed the gold off the chain and a patern around the sprocket, since the oem guides are too narrow, axle blocks are perfectly aligned. Im stuck with anugle chain now, look at the pics this was after 1 ride! "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
5 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
5 out of 5
Performance out of 5
Location: MT
love it
" chain is awsome havn't had to adjust at all since i put it on "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
5 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
5 out of 5
Performance out of 5
Location: Massachusetts
sprockets for the woods!!
" If you are into trail riding, these sprockets are for you! have about 5 rides on these on rocky trails and still look like new. great product for the money. will buy again for sure. "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
5 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
5 out of 5
Performance out of 5
Location: Odem,Texas
good
" good stuff at a great price. Lasted a while year of motocross races and a few hare scranbles "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
5 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
4 out of 5
Performance out of 5
Location: new haven, ky
great purchase
" i purchased this for a 98 cr250. I am glad i went with the steel sprockets but the renthal R3 o ring chain was almost too wide but it barely misses the engine case so it works good for me. "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
5 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
5 out of 5
Performance out of 5
Location: Amarillo, Tx
VERY DURABLE
" I bought this part about a year ago and it is still running strong. I would definitely recommend this part.thanks "
Overall:
4 out of 5
4 out of 5
Ease of Installation:
4 out of 5
Ease of Installation out of 5
Style:
3 out of 5
Style out of 5
Durability:
4 out of 5
Durability out of 5
Performance:
3 out of 5
Performance out of 5
Location: Not Available
" great price. don't know about other quads but for the the yfz 450 the rear sprocket is painted. pain in the rear to get on. had to sand blast the paint so the chain would track right. "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
4 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
4 out of 5
Performance out of 5
Location: Costa Rica
forever
" Nice sproket and pretty hard to beat... The next time i prefer to choose the x ring chain... "
Overall:
5 out of 5
5 out of 5
Location: Fenton, MO
Sprockets
" Hooked up well. They r sprockets. I hooked them up and have a few rides on them. They havent broke yet so they work. I dont have any races on them yet... "
Overall:
5 out of 5
5 out of 5
Location: Pendleton, KY
Great price Great product
" Low cost steel sprockets weigh a little more but work just the same as lighter aluminum. I have a few rides on them and they are not turning in and have not broken any teeth yet. I look forward to a long time using them. "
Overall:
5 out of 5
5 out of 5
Location: Concord CA/ Jacksonville FL
Great Value For The Price!
" This sprocket and chain set was installed with ease, and hasn't let me down yet. "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
4 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
5 out of 5
Performance out of 5
Location: Mesa, AZ
Lasts forever
" I ran these for over two years, and they were still in good shape. "
Overall:
5 out of 5
5 out of 5
Location: hiram meaine
turner steel sprocket and chain kit
" good quality parts fit right on no hassle good bargain "
Overall:
5 out of 5
5 out of 5
Location: middleton MA
" sprockets are awsome if you're looking for long lasting sprockets this is the way to go i do a lot of riding and i have had no issues with thease whats so ever "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
5 out of 5
Style out of 5
Durability:
5 out of 5
Durability out of 5
Performance:
5 out of 5
Performance out of 5
Location: MD
Great Combo!
" Installed this kit on my CRF250R and it is working great. I know this is a little heavier but i've had the renthal expensive kit and unless you think they look cooler or something.. just get this kit and have it for almost twice the life of a more expensive kit like the renthal one. I went with the x-ring chain and it never stretched. "
Overall:
5 out of 5
5 out of 5
Ease of Installation:
5 out of 5
Ease of Installation out of 5
Style:
4 out of 5
Style out of 5
Durability:
4 out of 5
Durability out of 5
Performance:
4 out of 5
Performance out of 5
Location: hudson NH
good product
" this product is great. it looks ok but the steal sprockets really hold up to a beating "
Overall:
5 out of 5
5 out of 5
Location: Jonestown, PA
Good Product
" Almost 25 races on them and they're still looking good! I'm going to replace soon with Turner again. "
Overall:
3 out of 5
3 out of 5
Location: Not Available
" good value. counter spocket didn't fit to good, but I got it on "
Overall:
5 out of 5
5 out of 5
Location: pueblo west, colorado
sweet sprockets and chain
" i bought these sprockets for my 2000 kx250. went on very easy. i've had them on for about a month now and i ride hard every day andthere is still no wear at all on them. i've gone through alot of sprockets and these ones are the best ones i've had.i called this order in and the guy who answered the phone was very kind. i had no problems with the shipping and it was super fast. i recomend these sprockets and chain to everyone. "
Overall:
5 out of 5
5 out of 5
Location: Santiago, Chile
Functional and cheap
" It looks good, it works and is cheap. It's not for competition, but for the weekends it's perfect. "
Overall:
4 out of 5
4 out of 5
Location: Fallbrook, CA
Discount Kit
" This kit is such a good deal. The only down side is it is a little heavy but unless you are a james stewart you wont even know the difference. "
Overall:
4 out of 5
4 out of 5
Location: Beeville,Texas
Excellent for a steel sprocket!
" If you don't mind the extra weight these are pretty good sprockets. "
Overall:
5 out of 5
5 out of 5
Location: Fallbrook, CA
Cant beat it
" for the price you cant beat it. unless you race supercross you wont notice the weight either. "
Overall:
5 out of 5
5 out of 5
Location: palmer lake colorado
amazing
" yes it is heavier then the others but so worth it. i personaly dont feel the extra weight there. just be shure to buy a chain link remover. "
Overall:
5 out of 5
5 out of 5
Location: Brewster, NE
Great combination
" This combination added major low end torq to my quad. I can hole shot any one that tries, on the down side i have sooo much low end that my top end is slower than most. "
Overall:
5 out of 5
5 out of 5
Location: San Lorenzo, CA
Great deal!
" The price is right for this combo, and the quality is A+. I'm very happy with my purchase. "
Overall:
5 out of 5
5 out of 5
Location: wylie, tx
steel no other way to go
" works great, i had an aluminum sprocket on my bike before and all the teeth were messed up from a little abuse. with this steel sprocket...no worries. people don't like steel cuz it's heavy, whatever a pound isn't gonna make a noticeable difference and it will last so much longer. "
Overall:
5 out of 5
5 out of 5
Location: Lanham, md
turner sprocket and chain
" its the best my bike is probalbly even faster now!!! "
Overall:
4 out of 5
4 out of 5
Location: woodleaf,NC
Nice deal
" i bought this combo with a gold did chain and it worked great, but the chain popped off because a rock got in the sprocket and the chain broke way to easy!!! the sprockets work great for all types of riding even for motocross, but they weigh alot, but still a great buy! "
Overall:
2 out of 5
2 out of 5
Location: Rydal, Ga
Great Combo for cheap price
" This combo would be great for someone who trail rides and doesnt mind adjusting the chain on occasion. Its heavier than the other combos, but as effective if weight saving isnt your issue. "
Overall:
3 out of 5
3 out of 5
Location: Houghton/Hancock, MI
Nothing special but good product
" I put a set of these on and have no complaints. They're steel so its nothing special but neither sprocket has rusted and the seem to be holding up well. "
Overall:
5 out of 5
5 out of 5
Location: Chaffey, WI
" the steel sprockets are extremely tough and are a must when putting a lot of power down on very good traction like ice racing. I use them on my heavily modded yz 250 for ice racing and they seem to never wear! not to mention they are much cheaper than aluminum. I use the R1 Gold chain and it makes a good combo. "
Overall:
4 out of 5
4 out of 5
Location: Brookings, Oregon
Good Quaility, Very Heavy!
" Good quality and great for the budget. The weight is the cost though. Almost three times heavier than an aluminum sprocket and that means performance drop. But for a great solid part get Turner steel combo. "
Overall:
5 out of 5
5 out of 5
Location: ocala florida
excelent
" this product is awsome it works great i love it it is not as expensive at the renthal but its still an excelent product i would reccomend this product to a friend because it is just as durible as a renthal or sunline or any of those products thats why i like this product "
Overall:
5 out of 5
5 out of 5
Location: Swain Co NC
Strong sprocket
" My son races harescrambles and can beat up a bike pretty bad! This sprocket has held up well! "
Overall:
5 out of 5
5 out of 5
Location: madison, alabama
great produt
" I bought this along with a new chain. The sprocket and chain were put some rigorous demands with some HARD launches and riding. Both performed well. "
Overall:
5 out of 5
5 out of 5
Location: stillwater, ok
Great buy
" This is a great deal, the sprockets are tough, the only drawback is the chain. That chain comes stock on the honda 450's and its pretty weak. You get a lot of side to side slap(so much that it gets into the tire and the Splash guard for the airbox) If you do purchase run the chain a little tight. "
Overall:
5 out of 5
5 out of 5
Location: Cadott, WI
Long Lasting Sprocket
" This sprocket may be a little heavier than the aluminum ones, but for the price and the fact that it last a lot longer i will risk making my bike a few oz. heavier. "
Overall:
5 out of 5
5 out of 5
Location: Atascadero, Ca
!!Steel All THe Way!!!
" THese last twice as long as the other ones. Forget that they weigh more I didnt even notice and saves me money!! "
Overall:
4 out of 5
4 out of 5
Location: Tampa,FL
Good for the money
" I bougth the turner sprocket kit for my crf450 cause I just couldn't justify spending more on an iron man that only lasted me about a year anyway. I was pleasantly surprised that the turner is a good sprocket set. I didn't wear it out yet but it fit perfectly, looked fairly cool ( not quite as cool as the iron man ) but for $100 less you really can't complain. Its solid steel and yes a little heavier but will you really notice 10 oz. on a 230lbs machine? "
Overall:
5 out of 5
5 out of 5
Location: AZ
best price
" This is a great product for the price this awsome site is offeringit for. "
2002 YZ 125 sprocket sizes?
what is the stock sprocket sizes for a 2002 yz 125? front and back.
Asked by easternrider241, Bucks County, PA
13 front 49 rear
Answered by dirt
what is the stock size sprocket and counter for my 2006 honda 450r
Asked by gbrown, livermore ca
Your 06' CRF450R came stock with a 13 tooth front and a 48 tooth rear sprocket. If you need to verify which gearing came stock on your bike (and this goes true for all makes and models), I'd recommend visiting Renthal's website. They've got a "fit my bike" section that will look up most of these basic stock measurements for your specific make and model. ( http://www.renthal.com/File/fit_my_bike.asp )
Answered by Darren77
Mounting Bolt Pattern
Asked by Hallio7
There are six tapered holes for mounting and 6 regular round holes for weight reduction.
Answered by Action
What size sprocket is standard on 05 Raptor 660?
Asked by BBlank
My vendor books lists the quad stock gearing at 13-40. This information was not from a yamaha certified book. I would double check with Yamaha if you would like to know for sure.
Answered by james718
How many links would I get for a 2005 Cr 85R?
Asked by Kr133r
Stock length is 116 so depending on what gearing you want to run I would recommend at least 120 links.
Answered by Drewski, Portland, OR
Does it include a master link?
Asked by mike250, port deposit maryland
All new chains we sell come with some type of master link whether it be a clip or rivet style.
Answered by james718
how many links on my chain 2003 xr250?
Asked by Andreww, Sandiego , Ca.
Steel sprockets normally last a lot longer than an aluminum sprockets so for deseret riding this should work just fine. You will need atleast a 120 link chain. Most likely you will have to cut a couple off.
Answered by Drewski, Portland, OR
does the gold o ring chain (turner) acompany a 520 turner masterlink?
Asked by ERNS406, JACKSONVILLE FLA
The O-Ring chain includes a clip style master link with it.
Answered by Drewski, Portland, OR
i need a 520-94 chain for a 06 trx 450er will the chain and sprockets turner kit same as stock
Asked by beav
The sprockets are pretty much OEM specs so they will fit that ride, but you will need to cut your chain to the correct length.
Answered by Drewski, Por+land
What is the difference?
Asked by Kr133r
A gold chain is going to be a stronger chain than a standard non gold chain so it will last longer and not stretch as easy. Basically the higher the price is on the chain, the higher the strength will be.
Answered by Drewski, Por+land
what is the difference between a x-ring chain and a o-ring chain?
Asked by stunner5
An X-ring chain is a higher quality O-ring chain. They typically have a higher tinsel strength and better quality O-rings. Basically it is a stronger, longer lasting version of a O-ring chain.
Answered by BOB3
How much heavier are these sprockets?
Asked by corbing, North Carolina
they are heavier than stock componets but if you are looking for cheap you found it (see my review of the set i purchased)
Answered by afisher, wisconsin
kx100
Asked by kxrider13, Cloquet, MN
front is 13 rear is 51 chain links is 124 hope that helps
Answered by morin, ct
I have a 2004 kx250 what exactly do i need? What size sprokets and Chains?
Asked by jtrockey
stock gearing was 13-49 and 114 links on the chain. Verify to make sure your bike is still running stock though if that's what you want to keep.
Answered by Drewski, P+RTLAND
Do I need any tools to change the chain and sprokets? If so do you carry it?
Asked by jtrockey
It's pretty straight forward, no special tools really required. To make fitting the chain simpler, you may need a chain breaker, but their are ways around not having one. Basically, if you can remove your rear wheel, you should have the tools to replace your sprockets.
Answered by Drewski, P+RTLAND
what sizes do I need for standard 2002 kx85?
Asked by JWII
14t / 50T is the stock gearing.
Answered by james718, USA
what is the stock size sprocket and counter for my 1996 rm 125?
Asked by Pab10vocho, Costa Rica
You'll need to double check your owners manual but i believe its 12 in the front and 49 in the back.
Answered by patrick77, Portland, OR

Dirt Bike

Honda

Honda CR125
Honda CR250

Honda CR500
Honda CR80
Honda CR85
Honda CRF250R
Honda CRF250X
Honda CRF450R
Honda CRF450X
Honda XR400R
Kawasaki

Kawasaki KDX200
Kawasaki KDX220
Kawasaki KDX250
Kawasaki KLX250
Kawasaki KLX300
Kawasaki KLX400R
Kawasaki KLX400SR
Kawasaki KX100
Kawasaki KX125
Kawasaki KX250
Kawasaki KX250F
Kawasaki KX500
Kawasaki KX80
Kawasaki KX85
Suzuki

Suzuki DRZ400E
Suzuki DRZ400S
Suzuki RM100
Suzuki RM250
Suzuki RM80
Suzuki RM85
Suzuki RMX250
Yamaha

Yamaha WR200
Yamaha WR250
Yamaha WR250F
Yamaha WR400F
Yamaha WR426F
Yamaha WR450F
Yamaha WR500
Yamaha YZ125
Yamaha YZ250

Yamaha YZ250F
Yamaha YZ400F
Yamaha YZ426F
Yamaha YZ450F
Yamaha YZ490
Yamaha YZ80

ATV

ARCTIC CAT

ARCTIC CAT DVX400
Honda

Honda TRX450R (ELECTRIC START)

Honda TRX450R (KICK START)
Kawasaki

Kawasaki KFX400
Suzuki

Suzuki LT250R QUADRACER
Suzuki LTZ400
Yamaha

Yamaha RAPTOR 700
Yamaha YFZ450
Yamaha YFZ450R
Yamaha YFZ450X

MotoSport.com - The Guys That Ride!