• 1-1/8" (28.6mm) diameter, double-walled aluminum alloy handlebar.
  • Immense strength, very good resilience and a virtual guarantee against fatigue failure.
  • Unlikely to bend except in severe crashes.
  • Specifically designed for MX & Supercross.
  • Bar pad colors may vary from shown.
  • Fits existing handlebar clamps and allows for use of 1-1/8" big bars.
  • "Universal Mounts" bolt on top of stock 7/8" bar mounts, and adds 1/4" rise.
  • "Rubber Mounts" replace the stock bar mounts on CR/CRF, KX/KXF and RMZ models.

TURNER OVERSIZED MOUNTS WITH RENTHAL TWINWALL HANDLEBAR COMBO

Our Price: $124.99
Retail:$159.94
You Save:$34.95 (22%)
To purchase this part, please select a ride:
Select from rides that fit this product

You May Also Like...

TURNER OVERSIZED BAR MOUNTS WITH RENTHAL FAT BAR COMBO
TURNER OVERSIZED BAR MOUNTS WITH RENTHAL FAT BAR COMBO
Price: $114.99
Retail Price: $149.93
You Save: $34.94 (23%)
ASV C6 BRAKE LEVER
ASV C6 BRAKE LEVER
Price: $89.99
Retail Price: $100.00
You Save: $10.01 (10%)
ASV C6 PRO CLUTCH LEVER
ASV C6 PRO CLUTCH LEVER
Price: $134.99
Retail Price: $150.00
You Save: $15.01 (10%)
TURNER OVERSIZED BAR MOUNTS WITH TURNER OVERSIZED HANDLEBAR COMBO
TURNER OVERSIZED BAR MOUNTS WITH TURNER OVERSIZED HANDLEBAR COMBO
Price: $74.99
Retail Price: $89.98
You Save: $14.99 (17%)
APPLIED WRAP TOP CLAMP WITH RENTHAL TWINWALL HANDLEBAR COMBO
APPLIED WRAP TOP CLAMP WITH RENTHAL TWINWALL HANDLEBAR COMBO
Price: $279.99
Retail Price: $306.99
You Save: $27.00 (9%)
Overall:
5 out of 5
5 out of 5
Location: Sarasota Florida
Best combo
" Love these bars and mounts.very easy to install. the twinwalls look so sexy on crf250r. "
Overall:
4 out of 5
4 out of 5
Location: Cumberland, RI
First Purchase and very happy
" First of all, just want to say I'm by no means a professional. I rode dirt bikes for about 4 years in my youth back in the early 90's and have been riding street for past 10. I just recently got back into dirt bikes as I bought my son (age 15) and I a pair of KX dirtbikes. Only our 4th time out and I decide I'm ready to learn wheelies on my 06' KX450F, NOT! Darn you youtube! Yup, as soooo many of us dopes do, we see how easy it is to do tricks on youtube and decide it’s so easy even an old man can do it, but what started off fairly well at first riding just a few inches off the ground for 3 and 4 seconds, ended abruptly by me showing my son how to eat it by ripping too much throttle ending up with a severely damaged ego, a seriously bruised rump shaker, busted throttle tube, and you gessed it, a bent set of handlebars So that’s my story, now on the review... The purchase was very easy, shipping time wasn’t bad, and assembly was simple. I called in prior to the purchase and the sales rep was friendly and extremely helpful in making sure I ordered everything I needed. I was pleased that everything was packed nicely and order was complete and even happier that when I assembled it, I didn’t need anything. The product is absolutely solid, from the design to how sturdy it looks and feels, I would definitely recommend this product, but make sure to buy the kit and the rubber grommets, as they will not fit in your standard mounts. As a side note, the prices were good so I will be buying from them again, however on another purchase (shorty clutch and brake levers for my ZX9R) it has been on backorder over a month!!!! Cmon guys, before the seasons over please!!! Install tip for newbs like me. I struggled aligning the handle bars at first, because I tried assembling the mounts to the handlebars first, so what I figured out (maybe not the best way, but it worked for me) was to assemble the bottom portion of the mounts first and get them fairly snug, then line them up so the handlebars fit perfectly when laid in, once this is done, tighten the bottom so there is no play in the mounts, then lay in your handlebars and get the top mounts snug before getting your torque wrench all around. "
Overall:
5 out of 5
5 out of 5
Location: Salt Lake City, UT
Everything you want in a handlebar
" These bars are great. I love them, and would never get another bar than these. They last like they should and feel great. These bars are super strong "
Overall:
5 out of 5
5 out of 5
Location: Sacramento, Ca
Great Mounts and Very Strong Bars
" This combo is excellent. I did make the mistake of initially getting the mounts that go on top of current mounts (I have a 2011 CRF 250R) and they did not show up for that year. Those mounts raised my bars too high. Anyway I exchanged the mounts for the 2010 Honda mounts and they worked great and look very nice. "
Overall:
5 out of 5
5 out of 5
Location: Henderson, Ky
Twinwall combo
" This combination on any bike would be the right move. It has everything to convert from 7/8 bars to 11/8 bars. Plus the bars are the best on the market. Then with those Turners bar mounts(the best combo kit) "
Overall:
5 out of 5
5 out of 5
Location: blairsville, PA
strong bars
" i have these on my crf250r. look great, and do NOT bend. i have had them on the ground a few times and still no bends. i am even talking my brother into buying them "
Overall:
4 out of 5
4 out of 5
Location: surprise,AZ
the toughest bars
" the bars are the toughest i ever had. i crashed and twisted my triple clamps but the bars unscratched. if you are putting solid mounts on a quad you need to shave the bottom bump to go on top of a oem steering stem. "
Overall:
4 out of 5
4 out of 5
Location: buckeye ,az
pretty good
" had pro tapers biggest waste of money evver like the over sized barrz "
Overall:
5 out of 5
5 out of 5
Location: Not Available
" great bar, it gives you the ability of being able to put a 1 1/8" bar on your bike while still having the 7/8" bar size for your levers and throttle tubes "
Overall:
5 out of 5
5 out of 5
Location: Pearisburg, VA
Best out there!!
" these bars are sick!! they have large diameter that look to be promising..and with these great mounts they took half hour to put on!!! Best bar out there "
Overall:
5 out of 5
5 out of 5
Location: caldwell,Oh
" There really comfatable bought a pair for my crf150r 08. "
Overall:
5 out of 5
5 out of 5
Location: denver, CO
i got these
" as a hardcore protaper fan, and when my protapers bent i got these as a replacement, and ill never buy any other bar, first off the got landed on and i broke my hand with a 450s dunlop on the bars and no bend, not even a scratch! THEN i lent my bike to a friedn and it fell out of his truck goin out my driveway and landed right on the bar and still no bend! plus they look trick! all my riding buddies have bought really expensive pro tapers that have bent or even snapped and i just laugh, GREAT bars "
Overall:
4 out of 5
4 out of 5
Location: Pascoag, RI
great combo
" these bars are awesome. they are very strong and have survived a few good crashes so far. The only thing is that now I cant get a set of tie downs that fit the bar because its so wide. I have to wrap it around and hook it to itself. the mounts are great quality and give the bike a nice look. installation was a little wierd on my 08kx450, as the bolt on the new mounts is much longer than the stock and it was clipping my cable stay on the frame. I had to bend the stay out of the path of the bolt. Also the allen screws that mount the bars fill with water everytime i wash my bike and they are starting to rust. I think it would have been better if they had just used bolts like the stock bars. allen screws are harder to adjust and there is always a chance of stripping them out. otherwise, I couldnt be happier with this setup "
Overall:
5 out of 5
5 out of 5
Location: Greenville, NC
Excellent Bar
" Bought the 06 yzf bend to replace my stock Renthals on my 06 kx250f. The stockers were in perfect condition still, just wanted a lower rise with less back sweep and added strength. Love the change, helps me stay over the front of my bike. Also the turner mounts look and work great. Both products were very easy to install. "
Overall:
5 out of 5
5 out of 5
Location: Auburn, WA
Good Combo
" You actually save a couple dollars getting this combo unlike the Pro Taper combohere on the Motosport site . The Turner clamps are beautifully polished and are of great quality. The clamps went on easy and fit well. I notice more flex in the Pro Taper Contour than the Twinwalls. The Twinwalls are still a great handlebar. "
Overall:
5 out of 5
5 out of 5
Location: North Carolina
Grate bar
" I will rate the handlebars with 5 starts. It is an excellent product. Improved my ride control and help on impact strength "
Overall:
1 out of 5
1 out of 5
Location: St. Cloud, MN
Carefull if buying for ATV
" These are very nice bars. But I had to return them because they would not fit on my 400ex. I know there is a way to get them fit but it can require some work. Otherwise they perform and look amazing. "
Overall:
5 out of 5
5 out of 5
Location: hollister ca
UNBREAKABLE
" flipped my bike down a nasty hill bent both radiators and sub frame. possibly the frame too. the bars were straight as an arrow. THESE ARE THE STRONGEST BARS I'VE EVER SEEN "
Overall:
5 out of 5
5 out of 5
Location: Western, NC
Great Set Up
" I purchased this set up for my son, it fit flawlessly and looks excellent. The bars are top notch as you would expect and the mount kit is a perfect compliment to the bars! "
Overall:
2 out of 5
2 out of 5
Location: Not Available
didn't fit at all
" I purchased this product about two months ago and when I tried to put it on my 06 crf 450, it was to tall and the throttle cable didn't fit. I used the 15 mill raise with the clamps so it may work with stock settings but that wasn't what I was trying to do. "
Overall:
4 out of 5
4 out of 5
Location: Honolulu, HI
Excellent Combo
" The Turner bar clamps work perfectly with the Renthal twinwall bars. The bars are virtually indestructible. I have yet to bend the bars or tweak the clamps. Excellent purchase. "
Overall:
4 out of 5
4 out of 5
Location: South Bend, IN
WARNING: ATV owners need to know this.
" I own a YFZ450 and bought these handlebars a few months ago. The bars look great but there is hardly any room to mount all your accessories on the limited amount of 7/8" bar available. I have aftermarket powermadd handguards on my bars and the only way I was able to fit stock start button, clutch, and handguards on the left side of the bars was to modify the clutch mount with a little bit of grinding. On the right side of the bar I had to do grinding on the front brake lever mount to get everything on this side of the bars. It may take a little work for anyone with thumb throttle and handguards but in my opinion these bars are top notch. I do a lot of racing and rough riding and these bars are very comfortable and are extremely durable! I crashed before on a large tabletop and flipped my bike end over end a few times, and the bars never bent, or cracked at all. I would recommend these bars to anyone but just be prepared to do some work to make them work. "
need some help with this
what is the stock bend for my 2002 yamaha warrior 350 and what mounts should i get i am only 14 so i need some help
Asked by warrior
I have no listing on what the stock bend is on the Warrior 350 but I would guess the height is somewhere in the 140mm region. as far as the mounts go, you would need the universal solid mounts which bolt onto your existing lower bar mount.
Answered by JesseC, Tualatin
i have a yamaha warrior 350 can i put the stock contrls on this? please help
Asked by warrior
yes all your stock controls will fit, all bars are 7/8" where the controls mount.
Answered by JesseC, Tualatin
which bend is the closest to stock crf250 bars?
Asked by almstfamus74, Mesa AZ
The Carmichael Twin Walls are the exact same bend as the stock CRF250R bars.
Answered by mx4l
im 6'5 ride a 450r bent my factory bars no clue what kind of bars i should get and what does 15 mm rise mean for the turner bar clamps
Asked by 450rsavage
The 15mm rise means the bar mounts are going to raise your bars 15mm higher or roughly a half an inch. So to pick a bar for you is tough because it boils down to whats comfortable for you. I would say probably start out with a CR high bend just because the dimensions are basically in the middle compared to other bends.
Answered by Drewski, Portland, OR
rubber and solid
Asked by laurence
Solid is like an adapter that fits on top of your stock lower 7/8 bar mounts... The Rubber mounts will replace your stock bar mounts d bolt and all. (your bike must have rubber mounts stock to get the rubber mounts)
Answered by racer3114, PDX
What kind of bend I should get?
Asked by Jordy, Theriot
the rubber mounts are cool for trail bikes i think, and you might need to cut these down so they dont look like bull horns sticking out really far on a little 125, but each bend fits a certain type of rider so try them out
Answered by bobs, denver, CO
i have a 98' rt 100 what does the solid mount 15mm mean?
Asked by Liv1
That means these bar mounts bolt directly to the top clamp with out any rubber cones to help cut down vibrations. The 15mm means they are 15mm taller than stock.
Answered by Drewski, Portland, OR
what bars for a 400ex
Asked by alex123, il
The Recommended Stock Bar Dimensions for a Honda TRX400EX: Width= 790mm; Rise=105mm; Sweep=90mm
Answered by james718
I have an 07 kx250f stock, whats the closest bar bend that will match it
Asked by kxer
if you want your bars to have the same bend as stock, i wud go with maybe the CR hi, but you really should try a diferent bend, there all a little different, go yo a bike shop and see which one you like, i like the carmicheal
Answered by bobs, denver, CO
The stock bend is the Renthal 971. The Carmichael bend in the Twin Wall has the exact dimensions.
Answered by james718
Whats a better bar for a 04 YZ250 This bar or the protaper se bar?
Asked by joshy, waupun, Wi
The twinwalls are a 1 1/8th bar and the SE's are a 7/8th. The twinwalls will be stronger so thats what I would run.
Answered by Drewski, Portland, OR
I have a 03 kx250 what bar bend is the closest to the stock and what about the mounts, rubber or solid?
Asked by kxrider03
That bike came stock with the Stewart bend, so a bar thats some what close to that would be the Windham bend. As far as mounts go it's going to be your decision. Normally the rubber mounts are a little more forgiving and helps cut down the vibes through the bars a little more than a solid mount. Normally most people switch from a solid mount to a rubber mount. If you do go with the rubber mounts make sure to get new cones along with them.
Answered by Drewski, Por+land
im 6 5 and ride a trx 450 r whats the best bend for me i was told the cr high?
Asked by 450rsavage
Most taller people prefer taller bars to keep them from hunching over. But also, handlebar selection is a rider preference.
Answered by james718
08 KX450f im 6-0" and like a wide hadlebar width, what do u recommend? I want to stick with the renthal twinall brand.
Asked by VetRider
There are quite a bit of bends out there so personally I would call in and speak with one of our sales agents and have them walk you through picking out what bend of bar would be best for you.
Answered by Drewski, P+RTLAND
Which style are the closest to the 08 yamaha ttr 230 stock bars.
Asked by mtnmann
Sorry we don't have the dimensions of the stock TTR230 bars. I would contact your local Yamaha dealer and see if they can provide you with the handlebar specs.
Answered by james718, Portland, OR
94 kx125
Asked by Kawasaki99, Abbs Valley,VA
This would be the cheaper way to run an oversized handlebar. Cheaper meaning you don't have to purchase a whole top clamp, just the oversized bar mounts.
Answered by james718, Portland, OR
Do they make a rubber mount for an 05 yz250?
Asked by Yzrider90
2005 YZ250 didn't come stock with rubber mounted bar mounts.
Answered by james718, Portland, OR
Can I mount a Scott Steering Stabilizer Sub Mount with this combo?
Asked by Yzrider90
These mounts are stock height and mount to the stock triple clamps. If you had the stock setup and was able to mount the sub mount than yes these clamps would accommodate.
Answered by james718, Portland, OR
could i get these bars for my 07 400ex and use stock controls? (throttle, clutch, killswitch, etc...)
Asked by HUGEJOHNSON
Yes the stock controls will fit.
Answered by james718, Portland, OR
Whats the closest bend to stock 07 KX250F?
Asked by Franc0
the Carmichael bend is the exact same as your stock bend
Answered by JesseC, Tualatin
ktm high bend?
Asked by 2010kxf, dallas, PA
yes that is an actual bend from Renathal but we do not keep them in stock but could definitely order them for you.
Answered by JesseC, Tualatin
what bar would fit a kfx 400 best
Asked by Andy400, Bangor,PA
it really depends on what you ride like if you ride agresive then lower bars my b better but if you put high bars would b more comfterbal for you it also depends on you hight tall person tall bars hope i helped
Answered by 1love
how would they mount?
Asked by blairmx008
The bar mounts will bolt onto your existing bottom bar mount so you dont need new clamps and you dont need to machine anything.
Answered by Drewski, P+RTLAND

Dirt Bike

Honda

Honda CR125
Honda CR250
Honda CR500
Honda CRF250R
Honda CRF250X
Honda CRF450R
Honda CRF450X
Kawasaki

Kawasaki KDX200
Kawasaki KDX220
Kawasaki KLX450R
Kawasaki KX125
Kawasaki KX250
Kawasaki KX250F
Kawasaki KX450F
Kawasaki KX500

MotoSport.com - The Guys That Ride!