Product went on and fits fine but the color is much different in real life than the one pictures. More of an orange.
Sunline Alloy Shift Lever
- 129 Reviews
- 13 Questions
Sunline makes it possible to keep your dirt bike on the track without missing a gear with their folding Alloy Shift Lever. Being truly race ready is not what the factory gives you, but Sunline has your back by using a folding tip on the shift lever that gives way to pressure from close holeshot battles or scraping pegs in the berm.
- A satin anodized finish covers the alloy shift lever to resist corrosion for a long lasting upgrade.
- Sunline uses a forging process to build the lever which reduces weight and provides a great look.
- Features a knurled shift tip for great traction and feel.
- The pivot point will work race after race thanks to the heavy-duty stainless steel oversized hardware.
- Sunline designed each of the levers to match up to the factory gear splines and hold tight with an 8 mm hex head bolt.
It is well made good spring in it. Sturdy I laid it down a few times. I were you I will get this shift lever.
Smart choice for a shift lever. Won't bankrupt you & looks Sexy. Far far more then I expected when it arrived.
Stronger, lighter, and much cooler looking than stock. What is not to like?
I have a 2013 yz250f and I race Mideast harescrambles and GNCC. I Have had this shifter last for more than a whole season. It never once bent on me, and it held up so long that I eventually wore out the spring inside from most likely mud races. Very satisfied!
Part fit good. Should be a good replacement from stock.
bought this for my RM250. The color seems to really last somehow....i like the fact that bolt has to be completely removed from the shifter before it comes off the bike
worth the money looks good lasts longer than oem
I Love this lever. The look and feel of it. Use lock tight though when tightening the bolt, it likes to slip out
Nice Fit, Looks Great, and Ergonomic
Ordering one for each of our bikes.
I have used these shifter before and not had a problem. I bought this one for a CR80. As usual from Sunline the product was nicely finished and appears tough unitl you get to where it connects to the shaft. I dont know why but they machined a lot of material away from the shifter in this area. and the thickness and way the pinch bolt close are just weak. Also, the splines on the inside of the shifter mount were almost non existent. Between these two ailments even with red loctite the pinch bolt would back out and then the shifter would slip. I almost sent it back thinking that it had to be some kind of manufacture defect due to the lack of proper spline height. I ended up just reinstalling the stock shifter which works fine.
This shifter looks good the color holds up well. The shifter has rope all the abuse
worked good as a shift lever. Bike tipped over and the lever cracked though the left engine case. 03CRF450r
warring out too fast and very uncomfortable on rmz250
Super cool looking...spices up the look of your bike more than you can imagine. Very noticeable and I get comments all the time.
No good. Too much flex and spring return for tip is broke already
this lever looks trick so i had high hopes for it. it didn't work so well. the metal is too soft. i was missing shifts and it was bent by the end of the first practice session. if you are aggressive with the shifter you will bend this thing first lap! by the end of the day the lever bent right under the engine result the bike stuck in a gear and me going home. i replaced it with the hammerhead design shifter and i have not missed a shift since. the hammerhead is indestructible and has zero flex
The lever looks good but that is about all the praise I can give it. I had to replace it after only about a month of riding when the splines wore out and it could no longer serve its function. It is not the case that my post needed replacing since the replacement I bought for this one works fine. I would not recommend. Spend the extra change and go with a different brand.
Shift lever works great. Better then oem!
I bought this shifter to replace the oem and within a month of riding I wore a hole in the tip way to soft of a material it was a waste of my 30 dollars
Dirt Bike / ATV: 1-888-676-8853
Great deal for $30. In stock now. I bought one for my Bro's KX450 and it looks sick. Just remember to line it up the same as your old shifter. Error in the favor for what is easy for up shifting. You don't want to strain to shift up, and all you have to do is stomp to down shift. Tear it up