RENTHAL FAT BAR - OVERSIZED 1-1/8
[+] Enlarge

More images:

  • Features a tapered outer wall resulting in a 1-1/8" (28.6mm) clamping diameter and 7/8" diameter at the control ends.
  • 7010 T6 aluminum with a braceless design and 5.0mm wall thickness at the bends to add strength.
  • Laser etched positioning grid.
  • Knurled grip area increases bonding between bars and grips.
  • Shot peened, anodized bonding between bars and grips.
  • Requires 1-1/8" bar mounts.
  • Combines excellent strength with good resilience.
  • This bar is particularly applicable where the lack of a crossbrace is of special importance.
  • NOTE: Bar pad sold separately.

RENTHAL FAT BAR - OVERSIZED 1-1/8"

Our Price: $79.99
Retail:$89.99
You Save:$10.00 (11%)
Please make your selections below to view availability
Bend
Show RENTHAL FAT BAR - OVERSIZED 1-1/8
Show RENTHAL FAT BAR - OVERSIZED 1-1/8
Quantity:
Please select a product from the options above.

You May Also Need...

RENTHAL GRIP DONUTS
RENTHAL GRIP DONUTS
Price: $2.99

RENTHAL FAT BAR PAD
RENTHAL FAT BAR PAD
Price: $19.99

RENTHAL GRIPS - TWIST THROTTLE
RENTHAL GRIPS - TWIST THROTTLE
Price: $12.99

Overall:
5 out of 5
5 out of 5
Location: Not Available
must have
" i freaking love these bars i bought 2 pairs put them on my crf150r and ktm125sx i love these bars must have!!!! there soo good!!! "
Overall:
5 out of 5
5 out of 5
Location: Foreston, MN
Very Strong
" I have had Fat bars for a few years now and love them. Very strong and light. I have taken a few spills and the bars are still straight. Will foresure buy another pair "
Overall:
5 out of 5
5 out of 5
Location: San Marcos, Ca
Fat with less Weight
" These bars are the BOMB!!! When the box came to my door I thought it was empty. The dimensions are as close to the stock bars as I could find and the feel is awesome. Less vibration, better look, more room for the GPS than with stock. I did have to modify the pad to fit with my ROX riser kit though. "
Overall:
5 out of 5
5 out of 5
Location: Maryland
Awesome bars
" No complaints.. pretty much tried all bends and the CR High's were the most comfortable for me. Looks great on my YZ. Shipping was fast. "
Overall:
5 out of 5
5 out of 5
Location: Bismarck, ND
Stick with the best
" These bars are nearly indestructible. fat bar has taken many beatings and crashes and has finally bent on me, only slightly but enough for me to notice. Time to buy a new one. Why buy anything else other than the best out there? "
Overall:
3 out of 5
3 out of 5
Location: Warwick,RI
very wide bars
" these bars are way too wide. i have them on my 2011 ktm 250 sx-f and when i race enduro they hit trees on the side if the trails in tight sections. they are great bars for motocross but not woods "
Overall:
5 out of 5
5 out of 5
Location: Taft, CA
I like'em
" I've used these bars since they were introduced. They have some flex on G outs, we all know those hurt. If you like some give in your bars these are for you and very hard to bend and if they do it is a freak accident that bent them. I get them on every bike I buy, my sons also and he is a true testiment to durability. "
Overall:
5 out of 5
5 out of 5
Location: Watkinsville, Ga
Great bars!
" I have this set of bars on my 02'cr250 and they have never slipped, bent, or chipped when ive wrecked! They are awsome bars! Don't get the 7/8 bars, they will bend. Also i like how my bars are "purple" hahahahahaha! Thank you Renthal! Avery348 "
Overall:
5 out of 5
5 out of 5
Location: I Live in Adams TN Race 25 times a year Vet AM
Renthal fat bars
" Fat bars, if you are not running them why. They are far more durable than 7/8 inch bars. I have tried alot of other bars and always come back to Renthals. The variety of bends and color is great. Handle bars are key to control and rider position. Get these and you will be hooked quality counts! "
Overall:
5 out of 5
5 out of 5
Location: Port Orchard, WA
Great bars
" I have had these bars on my yz250f for a couple years and they are still straight. I have had a couple little wrecks, but still hold their shape. The finish also endures alot. Theres a couple scratches but nothing much. I would definatly buy another set. "
Overall:
5 out of 5
5 out of 5
Location: carnation,wa
" good bars, good price, dont bend easily, i havent bent these bars and ive flipped and fell many times "
Overall:
5 out of 5
5 out of 5
Location: Yorba Linda, Ca
GREAT BARS
" I have a ktm sxf 250 so they came stock and ive taken some really bad falls and they havent bent yet "
Overall:
5 out of 5
5 out of 5
Location: Southampton, MA
Great Product
" I like these bars, very nice, color didnt chip off or fade. personally in a Pro Taper guy but these came on the bike when i bought it. i really like them so i put a Pro Taper bar pad over them, look the same as Pro Taper Contour and i didnt have to spend the money for new bars. very strong too! "
Overall:
4 out of 5
4 out of 5
Location: Fallbrook, CA
Strong
" these bars are very strong...they dont bend easily. "
Overall:
3 out of 5
3 out of 5
Location: Richland, Wa.
Alright bars I guess
" I had these bars on my RMZ450, and I had a minor crash, and they bent super bad. My Pro Taper Evo's have been through worse and stayed straight. "
Overall:
5 out of 5
5 out of 5
Location: New Mexico
pretty nice
" I dont know what bend I have but it is really nice I feel comfortable with these bars. I have a crf450r and I cant feel any vibration on it. never really had a bad wreck but I think they are good handlebars. "
Overall:
5 out of 5
5 out of 5
Location: kalamazoo MI
great bar
" i trail ride quiet a bit and found these to be great,(xr400) i have gone down and hit a couple trees with them and yet have suffered minor damage, have bent slightly, within 3 mm. but something has to give! my friend bent the stock bars on my DRZ400 and thought of these, but went for the 7/8 bars again to see how they will hold up. great bar and will buy again. "
Overall:
1 out of 5
1 out of 5
Location: Not Available
not worth it
" rode with these 4 times they endured 1 somewhat tough wreck but when i flipped riding a wheelie they snapped into 2 pieces the entire left side snapped right off "
Overall:
5 out of 5
5 out of 5
Location: Not Available
GGGRRRRREAT!!!!!!!!
" these bars came stock on my kfx 450 but i love them theyre impossible to bend and they are really comfortable to hang on to even with stock grips great bars especially for the price "
Overall:
2 out of 5
2 out of 5
Location: Tulare, Ca.
" I would not recommend the fatbars. On long rides i've noticed my hands get numb. A real rigid feel. I do recommend the renthal bars with a crossbar. "
Overall:
5 out of 5
5 out of 5
Location: Las Vegas, NV
Great looking, durable handlebars
" these bars wont bend when you wreck and at the same time add a stylish look to your bike. "
Overall:
5 out of 5
5 out of 5
Location: Sidney, MT
AWESOME!!!
" I would recomend renthall fatbars to anybody. I have had a few kinds of handlebars and have always bent them in the races, but with my fatbars I have had the hardests hits I have ever had and they have not even come close to bending. If you are looking for a sturdy pair of bars this is the way to go and for a very affordable prce too. "
Overall:
5 out of 5
5 out of 5
Location: Traverse City, Michigan
BARS
" The renthals are really light, strong, and most all bends are great. they are really nice bars,almost too stong...if you fall hard your mounts wil bend or snap "
Overall:
1 out of 5
1 out of 5
Location: New Jersey
" well the star rating isnt working but these bars are unbendable and do not transmit a lot of vibration to the riders hands. Great Bars "
Overall:
5 out of 5
5 out of 5
Location: Springfield,Or
Hold On
" Renthal Fatties are great bars. Comfortable and they hold up well to abuse and I'm heavy and wreck hard.. "
Overall:
5 out of 5
5 out of 5
Location: cda, idaho
great product
" these are way way better than standard sized bars. they look, feel better, and dont bend! they are a little more than stardard size but well worth it "
Overall:
5 out of 5
5 out of 5
Location: Atascadero, Ca
!!!!Unbendable!!!!
" Taken many hard crashes with these and no bend. These are Unbendable!! Great bars but they dont have the cross bar which I like "
Overall:
5 out of 5
5 out of 5
Location: Tennessee
Don't Bend
" These are a great comfortable bar. And I have had some pretty bad wrecks and they have not bent yet. Amazing! "
Overall:
5 out of 5
5 out of 5
Location: Colorado Springs, CO
these bars are gnar
" i had renthal fat bar on my bike for 2 years and it never bent. i crashed many times and in my recent big crash i sent my bike flying in the air and broke my subframe in 3 pieces beyond recognition but the bars were fine. "
Overall:
4 out of 5
4 out of 5
Location: Washington Dc
Good Bars
" Good well made bars, I like the stock CRF bend the most. I have crashed a few times on these and haven't bent them yet. "
How do I know what bend of handlebar I need?
Asked by pflugs21, Dallas, TX
to tell you the truth its all about personal preferance most people just stick with the stock bend on there bike or quad unless theyre use to a certain bend
Answered by conk
Do u have 2 buy all new brackets 4 brakes and clutch levers 2?
Asked by supermac, Ft. Rucker, AL
You would have to buy oversized bar mounts to run these bars. As far as all your controls, you can still run them because these bars taper down to a 7/8th bar where all your controls mount.
Answered by Drewski, Portland, OR
will it fit?
Asked by rmrider94
Depending on the bar mount diameter on your bike will determine which bar to purchase. Most manufactures use 7/8" bar mounts. If you are uncertain which to get, I would reference you owners manual or local shop tech and ask which bar is on your bike. Fat Bars are 1 1/8" and will not fit into a bar mount that is 7/8".
Answered by james718
The bar mount diameter is 1 and one eight. Does the bar taper back down to seven eights where the grips go?
Asked by woodsracer250
Yes they do.
Answered by james718
Yep, other wise none of your stock components would work. (perches, grips, throttle tube ect, ect...)
Answered by Drewski, P+RTLAND
whats the difference between each bar?
Asked by KtmAllTheWay, new york city
Each bar has a different height , width, and pull back on them so it's important to pick the bar that is most comfortable for you. Here is a link to what each bend measures out to: http://renthal.com/File/product2d.asp?productid=0&tabtype=5&zone=&biketype=&manufacturer=&model=&bikedate=
Answered by Drewski, Portland, OR
stock bend
Asked by gopedguy
The "RC Mini" is the same bend as 07 CRF150R stock bars
Answered by JesseC, Tualatin
Flex vs. Strength
Asked by rmzSMRracing457, Cream Ridge, NJ
The Fat Bar will be stronger than any 7/8" bar for the simple fact they are larger in diameter 1 1/8".
Answered by james718, USA
Yes, it does take more to bend the Fatbars than it does the standard 7/8th bar.
Answered by Drewski, P+RTLAND
bar mounts
Asked by ryanneugebauer1995, longview, tx
Any 1 1/8th mounts will do fine. You can run either the turner's or the Pro tapers. Either one will get the job done.
Answered by Drewski, P+RTLAND
What bar is close to the Raptor 700 bar size/bend
Asked by raptorscott
The 700 ran it's own bend, and the only ones that are somewhat close would be the RC high or the CR highs. You can also use their bend chart on their website to help you out.
Answered by Drewski, P+RTLAND
Rm85 Size?
Asked by Vahn
Yes the 85 is a mini
Answered by RCB255, Tualatin, Or

MotoSport.com - The Guys That Ride!