Awesome tool, great fit. Gets under the triple tree and catches nut every time. Simple and easy to adjust neck tension. Must have for travel and track tool box.
HP Tools T-Stem Nut Wrench
- 33 Reviews
- 3 Questions
- These wrenches are made specifically to loosen the T-stem nut without removing the handlebars.
- The opposite spanner allows for adjustment of the T-stem bearing without removing the triple clamps.
- Honda: 32mm open end, 46mm spanner end.
- Kawasaki: 32mm open end, 38mm spanner end.
- Suzuki: 32mm open end, 42mm spanner end.
- Yamaha: 30mm open end, 40mm spanner end.
Wrench works good, spanner side is a little thick, barely fits between upper triple clamp and top of steering stem.
it was the wrong size.
This thing makes tightening/loosening your steering stem a breeze! It is much easier to use this wrench instead of having to completely remove your handlebars to perform this task. Highly recommended
Wrench is sturdy - will last a long time. Perfect fit.
This is one tool you need if you have issues with neck bearrings coming loose!
Tool looks like it will hold up for a long time haven't had a chance to use it yet.
This tool saved me lots of time repacking my head sets on my 99 cr250 and my 02 cr250. Should last forever if used properly. Thanks MotoSport!!!
If you have a bike then you need this wrench. It is plenty long (and somewhat heavy) so it should stand up to years of use. It is also made thin enough that you can remove the upper clamp nut without taking the handlebars off.
Makes adjusting the Front end a Snap....
I bought this to use on my RMZ 250. It saves you some time by allowing you to service your front end bearings without removing your bars or controls. You can make quick adjustments to the tension on the spanner nut to tune out a bit of head shake without removing the top clamp. Can be used with a tourque wrench. Great tool for a great price.
it's a little long for the portable tool box
Great tool. Have one for both yamaha and suzuki and makes it easy for a job well done. Super cheap too, which beats 60+ bucks for OEM and other manufacturers tool.
Great tool for on the fly stem nut adjustments
Fits the nut under the top triple and the steering stem nut on top of the triple. For $12 it's a no-brainer.
The wrench size needed a little grinding to fit around the top stem nut.
Wasnt designed or fit properly to the stem nut. So i was forced to grind it down to fit. You can take your chances with this product but what do you expect for the prics.
perfect tool for my KX250F
I use this tool all the time. I am very picky about how tight my head bearings are and this tool makes servicing the front end super simple. Correct spanner for your bike to protect the nut, then proper hex head to to tighten that fragile aluminum nut on your top triple clamp. great buy
Great price for this tool and it makes the job easier then using a hammer and punch. Issue I had was that the actual wrench side did not fit my nut. i used a grinder and bored out the inner walls and it works great now. Spanner side fitted correctly. Tool has a coating on it to prevent rust and comes with a sleeve to store it in.