Top 100 Contributor
2 years 8 months ago
Location: richmond, va
basic schrader valve tool. one end for removing core, other for removing broken cores and opposite side for for retapping threads.
Top 100 Contributor
Over 4 years ago
Location: Easton, PA
Good tool after mod
I was going to bash this tool for being unusable, but then I read the other reviews. Sure enough, a tap of the hammer later you have a great tool. I threw the pointy thing out.
Over 4 years ago
Location: Troutman, NC
Great Tool
Removes valve nicely. Works great.
Over 4 years ago
Location: Southeast, TN
A must
This should be in everyone's toolbox. Is a must when changing tires to ensure you get all the air out of the tube...
Over 4 years ago
Location: North East, PA
Too wide for small wheels
Workes as expected but it is too wide to use efficiently on small wheels (CRF 70).
Top 50 Contributor
Over 4 years ago
Location: Springdale, AR
Modification needed...
Standard valve core tool, the cleaning stem has to be removed in order to use on moto wheels...hits the spokes otherwise. Tap out with a hammer and you're good to go.
Top 1000 Contributor
Over 4 years ago
Location: New Mexico
Must have if you have tires
This tool is very handy for fixing tires dont waste your time getting the plastic ones because they will break in a matter of time.
Over 4 years ago
Location: Houston, TX
Works well with mods
This tool was designed for cars, not bikes. The cleaning stem, the thin pointy piece, is too long to fit between spokes. Knock the cleaning stem out using a hammer and a small, deep-well socket. Afterwards the Schrader valve tool works great and the cleaning stem is still available to use if you need it.