• The Hot Rods crank bearings kit are the ideal alternative to the expensive OEM bearings.
  • Use the Hot Rods crank bearings to compliment the Hot Rod crank or use on the OEM crank knowing The Hot Rods brand only put out quality products.

HOT RODS CRANK BEARINGS KIT

Our Price: $69.99
To purchase this part, please select a ride:
Select from rides that fit this product

You May Also Like...

HOT RODS COMPLETE BOTTOM END KIT
HOT RODS COMPLETE BOTTOM END KIT
Price: $199.99 - $499.99
Retail Price: $258.85
You Save: $33.86 (13%)
HOT RODS/WISECO COMPLETE TOP & BOTTOM END KIT
HOT RODS/WISECO COMPLETE TOP & BOTTOM END KIT
Price: $284.99 - $664.99
Retail Price: $347.09
You Save: $47.10 (14%)
HOT RODS COMPLETE CRANK ASSEMBLY
HOT RODS COMPLETE CRANK ASSEMBLY
Price: $149.99 - $479.99
Retail Price: $198.99
You Save: $29.00 (15%)
BOLT SUZUKI RM/RMZ PRO-PACK
BOLT SUZUKI RM/RMZ PRO-PACK
Price: $54.99
HOT RODS CONNECTING ROD KIT
HOT RODS CONNECTING ROD KIT
Price: $79.99 - $99.99
Retail Price: $109.99
You Save: $10.00 (9%)
WISECO COMPLETE CRANK KIT LONG ROD STROKER
WISECO COMPLETE CRANK KIT LONG ROD STROKER
Price: $609.99
Retail Price: $657.99
You Save: $48.00 (7%)
Overall:
1 out of 5
1 out of 5
Ease of Installation:
2 out of 5
Ease of Installation out of 5
Style:
3 out of 5
Style out of 5
Durability:
1 out of 5
Durability out of 5
Performance:
1 out of 5
Performance out of 5
Power:
2 out of 5
Power out of 5
Location: East Troy, WI
Terrible Bearings
" I heard bad things about Hot Rods Cranks, but I decided to try them out anyways. TERRIBLE IDEA!! They lasted 16 months, then my motor locked up. I tore it apart to find that one of my crank bearings had blown apart! I will never buy a Hot Rods product again! Honda had it right! "
Overall:
1 out of 5
1 out of 5
Ease of Installation:
1 out of 5
Ease of Installation out of 5
Style:
1 out of 5
Style out of 5
Durability:
1 out of 5
Durability out of 5
Performance:
1 out of 5
Performance out of 5
Power:
1 out of 5
Power out of 5
Location: Not Available
hot rods
" I would never use these first the seal let go so i replace the seal and then i start hearing a bearing noise from the motor so i split the case and find a crank bearing is coming apart i will only use OEM parts from now on "
Overall:
4 out of 5
4 out of 5
Ease of Installation:
3 out of 5
Ease of Installation out of 5
Style:
5 out of 5
Style out of 5
Durability:
1 out of 5
Durability out of 5
Performance:
4 out of 5
Performance out of 5
Power:
5 out of 5
Power out of 5
Location: Ashland,OR
ok
" I put these in my 02 cr 250 and within 2 weeks they ceased up i put a new cylinder head and hot rods cranks in it i did a total rebuild along with big bore kit and v-force 3 reeds and it ceased up in 3rd gear so now i have to rebuild it once again and i just put over $100 bucks into it overall they are good but i think i either got flawed bearings or the mechanic took them and put the old ones back in "
Overall:
5 out of 5
5 out of 5
Location: Canton, Ohio
" These parts are good quality. I received the parts quickly. I didn't miss a race. "
Overall:
5 out of 5
5 out of 5
Location: Brookings, Oregon
Better than OEM!
" You can't go wrong with the HOT ROD Products. I install a lot of these products and they are great! If you get the crank kit make sure you get these also. "
Overall:
5 out of 5
5 out of 5
Location: Coxsackie, NY
Awesome deal
" Excellent deal. Better price than OEM and they come with seals. A no brainer. "
Overall:
4 out of 5
4 out of 5
Location: beaver. oh
Great product
" These bearings are a great improvement over stock they really match well with the hot rod crank and rod especially when u put a higher compression piston in your bike these are a must. "
Why are the Hot Rods bearings and seal kits only for Hot Rods cranks? Is it a clearance issue? Will the All Balls kit work on the Hot Rods crank?
Asked by shultz, San Dimas, CA
Well, I certainly couldn't tell you what exactly the differences are in the Hot Rods bearing and seal kits, but I do know that their cranks assemblies will only work with their respective bearing and seal kits. I'm left to assume that no other brand will work with their Hot Rods products, so the answer to your question must be no...
Answered by Darren77
im a machinist and I rebuild my old kx 250 motor and i precisionaly measure the oem crank and a hot rods crank and every diameter, lengths, radius and tolerances and they are all 100% the same. Sooooo both cranks are 100% the same except for the rod is a higher rockwell reading (higher temper which mades the metal harder). They are 100% interchangable. I contaced Hot Rods and got to a guy that must have just started because he spilled the beans and said that they write that so you will have to buy more of there products (main bearings, cranks and seals.).
Answered by desertrat1985, California City, CA
Will this work with the oem crank for my cr250
Asked by KyleC
These are match to the OEM bearings.
Answered by james718
04yz85
Asked by yzrider4life
Yes, these will fit a stock crank.
Answered by MotoMoo2, Portland
i have a yz 125 and they fit in my stock crank so im sure they will fit just buy them and if they dont fit get the crank it makes your power skyrocket
Answered by TheLoveGuru, Ashland,OR

Dirt Bike

Suzuki

Suzuki RMZ450

MotoSport.com - The Guys That Ride!