GSXR 1000 Safe Clutch Switch + Fly Billet Kill Switch?
I own a GSXR 1000 2010 (K9 Model) and the clutch has to be pulled in every time I start the bike. This is not a big deal though... however I wanted to replace my OEM clutch lever/perch for another lever that does not support the Safe Clutch Switch which is attached to my OEM lever/perch.
There are 2 wires attached to my OEM lever/perch, so I was wondering if the Fly Billet Kill Switch would temporarily by-pass the Safe Clutch when its button is pushed? I have no problems on pushing the start button + the Fly Billet Kill Switch to start the bike, I just need to get rid of my OEM lever and install a better one.
If I just connect both wires together, the bike will start, however the fuel map will be stuck in Neutral map, since the ECM will think that the clutch is always pulled in. So that's why I need something to work just temporarily when I start the bike and then release it off, just like the OEM clutch does (pull in to start the bike, then release it off).
Any help will be great !!
MotoSport Staff Over 7 months ago Location: Portland, OR, USA
This switch would be able to perform the function you are looking for. It will need to be wired correctly but it does function in the same way as your clutch switch does.