These gaskets were great i baught the pack and had all i needed when i took apart the cases. This gasket kit helped me put my bike back together quickly and easily because i had all the engine gaskets in on package.
These gaskets were purchased with a complete top-end rebuild kit for my sons RM 85 here at Motosport . We have had nothing but problems with them leaking. They didn't give me the option of anything else, so I tried them. Never again. I will request Cometic next time.... or go OEM.
Ease of Installation
Top 1000 Contributor
Over 7 months agoLocation: Citrus Heights, CA, USA
I would include the water pump cover gasket but not the water pump shaft seal. There is a Hot Rods Water Pump Repair kit that would include that seal you are looking for: http://www.motosport.com/dirtbike/Hot-Rods-Water-Pump-Repair-Kit
There may be a different gasket kit that Athena makes specifically for your cylinder kit as this kit should would as a OEM Replacement gasket kit. I would most likely get it contact directly with Athena to see if there is a specific gasket kit for the cylinder you have. http://www.athenaparts.com/eng/contact
I am looking for a crankcase seal and piston seal to be exact for a 95 Kawasaki kx250. would there be any think else i would have to worry about if these seals need to be replaces like needing new cylinder sleeves or a new piston
This kit will include the all the gaskets and o-rings required for a complete engine rebuild. It does not include the seals required. You will need to purchase crank seals, kickstart shaft seal, shift shaft, countershaft and water pump seals separately if they are needed. Anytime you tear a motor down, depending how many hours are on it, it usually a good idea to throw in a new piston along with new main bearings and transmission bearings. Unfortunately without tearing the motor down, it is very hard to inspect these components to say if they do indeed need to be replaced.