This brake line works perfectly! The reason I purchased this line was because my rear brake was spongy and tried a few things to try fixing it (new Braking pads, master cylinder rebuld, complete system flush, and vacuum bleed) and ended up with a tiny hole in the line. I was skeptical about ordering an aftermaket line with other reviews saying that the line was too long and the rubbed the shock and/or exhaust. I installed it on a 2007 crf250r and it fit just like the stock line so no complaints there. I bought the galfer line over the ride engineering one because this one came with new banjo bolts and washers. They work and fit fine but the bolt head is slightly bigger than stock and you cant get a socket on it as well as clear the master cylinder (at least on the honda) so I had to take the master cylinder off and use a wrench to tighten the banjo bolt. That was my only complaint, but not a biggie. I have several rides on it now and compared it to my buddy's '06 crf250r with stock brakes and there is a not drastic but noticeable difference in stopping power.