beast 1 month 29 days ago Location: Wayland, MI 49348, USA
Where can i buy a whole cylinder jug for a 2007 yamaha raptor 700?
i thought that raptor 700 had a sleeve but I tore into it and I looked and there is no way a sleeve would go in it so I was wondering where I could get one
MotoSport Staff 1 month 24 days ago Location: Portland, OR, USA
You can find the complete cylinder for the 2007 Yamaha Raptor under our OEM parts finder here: http://www.motosport.com/atv/oem-parts/YAMAHA/2007/RAPTOR-700/CYLINDER
Scott 2 months 16 days ago Location: Bensalem, PA 19020, USA
I have an old cylinder that needs to be resleeved on a 1988 Cr250.?
If i purchased a L.A. sleeve kit and a wiesco pistion kit how can I get it installed to match?
MotoSport Staff 2 months 15 days ago Location: Portland, OR, USA
You would need to find a local machine shop that can install the sleeve for you and they can also size/bore the sleeve to match the size of the piston. Unfortunately it is not something that can be done at home with basic tools.
400ex 3 months 26 days ago
What is stock cylinder bore for a 89 350 Honda for tracks? And what is cylinder bore diameter for 89 350 Honda for tracks bored 30 over?
MotoSport Staff 3 months 19 days ago Location: Portland, OR, USA
The stock bore would be 80.00 mm. Bored 30 over it would be 80.75mm.
If I have a standard bore piston do I still have to bore it to fit my piston??
MotoSport Staff Over 7 months ago Location: Portland, OR, USA
If you have the standard bore piston, boring or re-sleeving a stock cylinder will be unnecessary. You will of course want to check the condition of the cylinder to see if any repairs will be needed.