Cycra Pro Bend - Center Reach 7/8" Standard Bar Mount Kit


$113.99 $133.99
15% Off - Save $20.00

Description See Also: 12 Reviews 18 Questions
Item #CYC000I

Read More
12 Reviews
4.5 out of 5 stars
5 Star   8 4 Star   4 3 Star   1 2 Star   0 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Jeff Verified Purchaser
Mobile a
Great Product

Great product. I've had several sets of cycra handguards in the past. very strong & great fit.

Cycra Pro Bend - Center Reach 7/8
Benjimoto55 Verified Purchaser
Best aftermarket gaurds out there!

I've had my eye on these for a while and finally bought some. The ease of installation was a bit tricky but nothing to hard to handle. Once they are on they are indestructible! Just today I took a fall going on a tricky hill on a rock face and ended up going down. These gaurds didn't even move! No broken levels either. Which is a big plus because I tend to
break a lot of levers. The shields are very durable and didn't break,
only minimal scratches, the abrasion guards got roughed up a bit but the metal bark buster stayed in prime condition.

Yamadawg Verified Purchaser
GA
They look great!

The handgaurds are some of the best looking ones on th market. I did have an issue with fitment though. I had to cut my clutch lever because it hit when pulled in. Also, I had to trim the plastic to fit around the brake lever mount. After installation, my bike looked entirely different. Overall, I was very pleased with my purchase.

HiredGun31 Verified Purchaser
Save your hands

Great product. Easy install. Just keep in mind you'll need to cut the ends of your grips off to access the holes in the handle bars for installation. Well worth the it!

COLESLOBODA Verified Purchaser

REALLY LIKE THESE HANGUARDS. AWESOME!!!!!

Rich Verified Purchaser

If your looking for bark busters for a yz 85 I just put these on my sons bike and they fit well. Cycra Pro Bend - Center Reach 7/8" Standard Bar Mount Kit

MotoEnthusiast Verified Purchaser
MotoEnthusiast
AWESOME GUARDS!

Fit great on my CRF250R! Really durable!

EnfieldPingua Top 1000 Contributor
Ranchi, INDIA.
Review after 24000Kms.

I finished my Ride around India in 8 continuous months and 24000 Kms with these Cycra Handguards... I did take a few nasty falls with my motorcycle fully loaded with luggage weighing over 55Kgs... these handguards did behave like guards, never did they move away from the position that I have fixed them onto, neither did they show signs of breaking away... these handguards are truly the guards of your fingers and levers... most highly recommended for any adventure rider !

alwaysgettingthewrongpart Verified Purchaser
Maui, HI
Fitment Issues

Solid product but almost always requires bending, sawing, and repositioning handlebar cables and controls. Just installed a set on my WR450....keep a hack saw and drill handy if you order these.

EnfieldPingua Top 1000 Contributor
Ranchi, INDIA.
My Bull's Horn !

I've them on my Royal Enfield Lightning535's RD-style Rally-Handlebar... a smooth and easy fit within 15minutes! These handguards have literally been my Bull's horns... on Indian roads !! I think this specific Pro-Bend CRM Handguards are the best Lever+Finger protector money can buy... my front brake reservoir too has been covered by these guards...

No Need to Kiss GoodBye to your Lever-Balls... No Need to remove the Handlebar-end Weights ==> these handguards can be fitted over the Full Length Levers + Handlebar-end Weights + Brake/Clutch Fluid-Reservoir !!! Fine-tuning the handguards regarding angle and rake I want them in to my personal taste took 2days ;)

I searched and reviewed a lot of handguards before purchasing... I prefer and use High-Rise + Ultra-Wide Rally-Handlebars and found that Pro-Bend CRM Handguards best suited my needs and did perfectly fit... dashing look is one sideffect ;)

The only other handguard which did come to my mind were the HDB Handguards, but they didn't suit my Ultra-Wide Handlebar preference.

My Bull's Cockpit
Cycra Pro Bend - Center Reach 7/8
person61 Top 250 Contributor
Mt. Airy North Carolina
Feel like a pinball

These bark busters are the best pair I've owned. They're light, and for the most part, easy to install. They're actually harder to bend than the old steel bark busters. When you lay over the bike on the throttle side, they don't make the throttle stick like my old moose ones did. The only thing I don't like is when you really nail a tree or big rock, you bounce off of it and either run into another tree or wreck, but it's better than broken fingers and broken levers.

Coltonlee31
My experience

I bought these to put on my 06 kx250 and didnt have any luck. The guard was to close to my bars and wouldnt fit around the front brake resivour. Also I'm short so I have my forks raised to the bars which didnt allow me to place the clamps in the correct position. If you can make them work they seem like they would be great, and they were actually very light. They also seemed that they were large enough to run a lever without having to cut the ball off the end. If you can make them fit I would recomend.

18 Questions
Answered:   18
Not Yet:   0
spencer
Q: Is this just 1 or the set?
1 year ago
MotoSportExpert
Expert MotoSport Staff
1 year ago
A: This would be a set.
EastonW
Q: Will these fit my 2015 kawasaki klx 140L?
1 year 3 months ago
MotoSportExpert
MotoSport Staff Expert
1 year 3 months ago
A: This is a universal Cycra Hand Guard that is made to be used on a wide range of Motorcycles. It does not have a specific model fitment but you should not have any issues using it on the 7/8" bars on your 2015 Kawasaki KLX140L.
DHJames21
Q: Does the yellow match the suzuki stock yellow?
1 year 8 months ago
MotoSportExpert
Top 1 Contributor
1 year 7 months ago
A: Suzuki does not use the same color of yellow for all years and models of bikes. The color will be as pictured there, so make your best guess with your Suzuki.
Bobb
Location: Lisbon
Q: Do these come with everything needed to install or do the handlebar inserts need to be bought?
1 year 9 months ago
MotoSportExpert
Expert MotoSport Staff
1 year 9 months ago
A: Yes this kit will come with all the mounting hardware you need for 7/8 and 1 1/8" handlebars.
Cycra Probend Center Reach Mount - Complete Racer Pack Includes: Center Reach Bars, Center Reach Mounting Clamps, Classic Enduro Shields, Powergrip Alloy Bar Ends & All Hardware.
rueben
Q: Will these work with protaper suzuki mini bars?
2 years ago
MotoSportExpert
Top 1 Contributor
1 year 11 months ago
A: This is a universal Cycra Hand Guard that is made to be used on a wide range of Motorcycles. It does not have a specific model fitment but you should not have any issues using it on your 7/8" bars.
jamendoza85
Location: Miami, FL, USA
Q: Difference between both kits offered?
2 years 1 month ago
Hi. I have a KTM XCF250W 2010 Kini Red Bull Edition and i need a hand guards kit but i don't understand the difference between the "Cycra Pro Bend Kit" and "Cycra Pro Bend Center Reach Mount" I hope you answer my question and tell me which one do i need to make the right purchase ASAP! Thanks
MotoSportExpert
Top 1 Contributor
1 year 11 months ago
A: The difference in the Cycra Pro Bend kits is in the inboard mount:

The Cycra Pro Bend center reach kit for bars includes: Center Reach guard, Center Reach mounting clamp, classic Enduro shield, Powergrip alloy bar ends and all hardware.

The Cycra Pro Bend kit Bar Pack includes Probend bars with bumpers, Enduro shields, Power Grip bar ends and hardware (mount clamps not included - and selectable in the pulldown menu option).
schroeder
Q: Will they fit a 2014 honda crf230f and do I need 2 kits or just one for both sides of the handlebar?
2 years 5 months ago
MotoSportRyanT
Expert MotoSport Staff
2 years 5 months ago Location: Portland, OR, USA
A: Yes, as long as you have standard 7/8" handlebars on your Honda CRF230F these should mount up on your bike great. These are sold as a set so you will only need to order one (1) and you will receive handguards for both sides of your bars.
happytrails
Q: Will these fit the OEM Yamaha 2012 WR250R handlebars?
2 years 5 months ago
All the websites I checked seemed to say these will not work with the Yamaha WR250R
MotoSportExpert
Top 1 Contributor
1 year 11 months ago
A: On your Yamaha 2012 WR250R, you will have to find the best option for the center mount because of the dash board and headlight unit on the bike to work. Cycra offers a few different options from fork mounts, to center mounts.
vince
Q: Will these work on renthal 7/8th bars with a crossbar?
2 years 8 months ago
MotoSportRyanT
Expert MotoSport Staff
2 years 8 months ago Location: Portland, OR, USA
A: Yes, The Center reach 7/8" Standard bar mount should work perfectly with Renthal 7/8" Handlebars.
JeremyB
Location: Maine, USA
Q: This will fit the pro taper s/e bars correct? Also is the plastic the one in the picture?
2 years 10 months ago
MotoSportRyanT
MotoSport Staff Expert
2 years 9 months ago
A: Yes, this would work with those Pro Taper SE handlebars. Also, these kits come with the white plastic hand guards like shown.
1-10 of 18