The Cycra ProBend is hands down the best mod you can do to your woods racer. The kit installs easily, and is a straightforward process. Fit and finish are great, and the side bumpers are a nice touch.
Cycra Complete Pro Bend Racer Kit - W/ Side Triple Clamp Mount [obs]
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
I like them so far.Once I finally figured out how to install them.They only come with one page that is pretty vague.They also forget to mention that you have to have longer triple tree pinch bolts on triple mount kit.Stock crf450r bolts are long enough to catch few threads, and if you try to tighten them,they will strip the threads.Not enough thread(bolt too short).Would have been nice to know that,Id have ordered them!!They did NOT line up very good on my Renthal twin walls.Some bending and mach up was required.Once installed they look good.Id buy em again,just learn from my mistakes!Order the longer pinch bolts on side/triple tree mount kit>>>>
After my 2 friends told me how much they loved these on there rmz450's I had to have them. I ride in the woods alot and these are a must have, Easy to install on my crf450r, and very durable, I have taken a few good spills and they have held up amazing, just buy them.
have had these on my bike for 2 years great product
These handguard offer excellent protection and look like they will strenghten the bars rather well. The down side is that when you get these guards you have very little bar adjustment and lever position is very limited. I am a taller rider and like having my levers more down than most. In order to acheive this I had to cut a tab off of my front brake master cylinder so that I could angle the line off the master to clear one of the side mount brackets. On the clutch side I had to chamfer the sharp edge where my clutch cable was rubbing and I also put som hose on the outside of the clutch cable to prevent excessive wear. The install took me quite a while installing and removing and grinding, and I also had to take my master off to modify and bleed the brakes after. Good product none the less, just know that if you are concerned with lever position that you may have to make some modifications.
THESE THINGS ARE BULLET PROOF. THEY TAKE A BEATING AND HOLD UP, THEY ARE SANO. GOOD ERGOS, LOOK GREAT AND NOT HARD TO PUT ON. I HAD OLDER PRO TAPERS THAT DIDNT MATCH UP WELL WITH BUT I PUT ON NEW PRO TAPER CONTOURS AND I HAD NO ISSUES. I LIKE THE FACT THAT YOU CAN CHOOSE DIFFERENT MOUNT STYLES, IT MAKES IT SIMPLE. IF YOU ARE A DESERT RIDER, TRAIL, WOODS OR ANY OFF ROAD/ MXER, YOU SHOULD HAVE CYCRA PRO BENDS ON YOUR BIKE.
I put a set of these on my ktm 200 exc and love them. They worked espesialy well with my cut handle bars. They offer plenty of room for my levers, and give my bars extra strenght. I dont know if this is true or not but they seem to have cut down on vibration to. A little bit tricky to instal but once tere on yu will love them. Spend the extra money you wont be disapointed.
Tired of your hands taking a beating everytime you hit the trails. The Cycra Pro Bend handguards are easy to install and give your hands great protection. They are a must have for any hardcore trail rider.
I hate when you install a set a bark busters and you have to cut your levers and your hands feel cramped.Not with these,with the bend and size there's plenty of room.
I love the guards. The triple clamp mount is great, there is no chance of the guards spinning on the bars like the old mounts. Definatly recommending these to my friends.
These hand guards have always looked so trick in the mags, I thought I would finally try them on my 2007 WR 250F. I have been an Enduro Engineering fan for many years, but wanted to try something new.
The quality is first rate. I opted for the triple clamp mount. Here are my issues: 1. When you cut the bars, nothing lines up. I cut my bars a total of 1.5 inches (combined both sides) and it took a lot of drilling, dremelling and vice bending to get things to line back up. 2., The right triple mount does not allow my front brake hose hose to rotate and that is kind of annoying.
Riding with them is very nice. They are solid and the bent design allows for full-sized levers. Bottom line, they take some set-up, but once they're on they are great. I would recommend the "center bar" mount design if you plan to cut your bars.