Dunlop offers some of the best Motocross tires available which is why so many pros equip their dirt bikes with them.

Trusted for years by the industry and used on the top Motocross tracks nationwide for just as long, Team Dunlop conducted testing of their own and determined the best setup for every track in the Lucas Oil Pro Motocross Championship series as well as several of the more widely used and popular tracks beloved by racers and fans alike.

Hangtown MX - Rancho Cordova, CA

Typical Conditions: The start is sandy loam. The hillsides become hard packed. For the National they bring in rice hulls and mix with the dirt on lower section of course.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S 80/100-21 with tire pressure of 12.5 PSI.

*At times MX71 front

Glen Helen Raceway - San Bernardino, CA

Typical Conditions: Track stays loose with a firm base. There are large stones that can become exposed.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 13 PSI

Thunder Valley MX Park - Lakewood, CO

Typical Conditions: The track has some sandy loam on it. The hillsides become hard packed. Because of the altitude some riders would use MX52 rear for less bite on the start, less pull on the motor.

Best Tires and Ideal Set-up:

  • Front: MX52F 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12.5 PSI

High Point Raceway - Mt. Morris, PA

Typical Conditions: The start is sandy loam. The hillsides become hard packed. Rocks become exposed on the hills. If it rains use MX11 rear at this track.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 13 PSI.

Muddy Creek Raceway - Blountville, TN

Typical Conditions: Brown clay that becomes hard packed.

Best Tires and Ideal Set-up:

  • Front: MX52F 80/100-21 with tire pressure of 12 PSI
  • Rear: MX52 with tire pressure of 12.5 PSI

Red Bud MX Park - Buchanan, MI

Typical Conditions: Deeper sand than normal races. Some riders use MX11 for the soft start.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12.5 PSI

Southwick MX 338 - Southwick, MA

Typical Conditions: Sand track. Gets very rough.

Best Tires and Ideal Set-up:

  • Front: MX11F 80/100-21 with tire pressure of 11 PSI
  • Rear: MX11 with tire pressure of 11 PSI

Spring Creek MX - Millville, MN

Typical Conditions: Sand whoops and a soft deep start.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12.5 PSI

Washougal MX Park - Washougal, WA

Typical Conditions: Hard slick clay.

Best Tires and Ideal Set-up:

  • Front: MX52F 90/90-21 with tire pressure of 12 PSI
  • Rear: MX52 with tire pressure of 11.5 PSI

Unadilla - New Berlin, NY

Typical Conditions: Hard pack with rocks.

Best Tires and Ideal Set-up:

  • Front: MX52F 80/100-21 with tire pressure of 12 PSI
  • Rear: MX52 with tire pressure of 13.5 PSI

Budds Creek - Mechanicsville, MD

Typical Conditions: Saw dust mixed in with clay. Can become slick late in the day.

Best Tires and Ideal Set-up:

  • Front: MX52F 80/100-21 with tire pressure of 12 PSI
  • Rear: MX52 with tire pressure of 12.5 PSI

Ironman - Crawfordsville, IN

Typical Conditions: Deep soil grows hugely rough and rutted.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12.5 PSI

Freestone Raceway - Wortham, TX

Typical Conditions: The start is sandy loam. Track is mainly flat with Jumps.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12.5 PSI

Steel City Raceway - Delmont, PA

Typical Conditions: Hard packed clay dirt with many jumps.

Best Tires and Ideal Set-up:

  • Front: MX52F 80/100-21 with tire pressure of 11 PSI
  • Rear: MX52 with tire pressure of 12.5 PSI

Pala Raceway - San Diego, CA

Typical Conditions: The track develops choppy bumps and some firm, hard spots.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12.5 PSI

Gatorback Cycle Park - Gainesville, FL

Typical Conditions: The start is sandy loam. The hillsides become hard-packed.

Best Tires and Ideal Set-up:

  • Front: MX52F 80/100-21 with tire pressure of 12 PSI
  • Rear: MX52 with tire pressure of 12.5 PSI

*For SX event use MX52F 90/90 or 80/100 with MX3S rear.

Oak Hill Raceway - Alvord, TX

Typical Conditions: Sandy loam with a concrete start pad.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12.5 PSI

Millcreek MX Park - Pell City, AL

Typical Conditions: Red clay. This track can get hard and rutted.

Best Tires and Ideal Set-up:

  • Front: MX3S 80/100-21 with tire pressure of 12 PSI
  • Rear: MX3S with tire pressure of 12 PSI