Introducing the Moto-9 Flex. Bell is committed to providing purpose-built solutions that provide across-the-board head protection for the modern rider. So when it came to evolving the race proven Moto-9, they wanted to re-think fit and build on the helmet's longstanding ability to manage energy. Bell is pleased to report, they did. Leveraging the segmented liner from the Segment bike helmet, they sought to achieve a more personalized, adaptive fit, for a wide variety of head shapes. In creating a first-of-its-kind three-layer impact liner, Bell utilized a revolutionary combination of polymer materials to provide a "progressive" energy management system that's designed to absorb low, mid and high-energy impacts. When it came to testing, their initial Flex samples outperformed any other motocross helmet they've tested to date. The result is no accident, the Moto-9 Flex is the most advanced helmet Bell has ever made and is quickly setting a new level for rider protection in motocross and off-road racing.
Composite carbon shell.
EPS-lined chin bar.
Removable and washable XT-2 Extended Wear interior.
Flying Bridge Visor.
Integrated roost guard.
Magnefusion Emergency Release System (MERS).
New and improved Magnefusion magnetic strap keeper.
Padded chin-strap with D-ring closure.
QuickFlip visor screws.
Velocity Flow Ventilation.
Industry-leading five-year warranty.
Padded, lined helmet bag included.
Weight: 1450 grams.
Certification: DOT and SNELL.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.