The legend returns with the new Mag-9 helmet from Bell. Ultra-comfortable and versatile, and designed to easily accommodate the Bell-specific Sena SMH10 Bluetooth(r) stereo headset and intercom, the Mag-9 redefines the open face helmet category with unmatched features and quality. From long distance touring to cruising your favorite local roads, the Mag-9 is the one helmet that does it all in style.
Lightweight polycarbonate / ABS shell.
Three EPS sizes for maximum comfort and size range.
Velocity Flow Ventilation creates the most ventilated helmet in the open face category.
Accommodates the Bell-specific Sena SMH10 Bluetooth(r) and Cardo Scala Rider Q1 / Q3 stereo headset and intercom (both sold separately).
Helmet can be run in multiple configurations: with or without shield and with or without visor.
Fast and easy tool-free shield changes.
Drop-down sunshield offers "on the fly" protection from the sun.
Removable and washable, antibacterial / antimicrobial interior comfort liner.
Contour cheekpads for superior fit and comfort.
Convenient speaker pockets make it easy to set up the Mag-9.
Weight: 1200 grams.
Industry-leading five-year warranty.
Notes: Ships with clear shield, other hues sold separately. If you already have a Sena SMH10 unit, a Bell-specific clamp and boom (sold separately) will be necessary to install. If you already have a Cardo Scala Rider Q1 / Q3 unit, a Bell-specific adapter (sold separately) will be necessary to install.
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.