I rely on my hour meter to mainly help keep track of oil changes, but it's great to help keep track of everything on your bike. The tachometer is a nice option that helps me tune my carb. This meter has been flawless for 2+ years.
Hardline Tach / Hour Meter
- 13 Reviews
- Ask a Question
New! for 2012, Hardline Hour / Tachometer with adjustable input, Resettable Maximum RPM and Log Book!
Hardline Products Surface Mounted Inductive Meters provide what today's power-sports user needs and expects from our hour meters. These Hour Meters are the best selling hour meter on the market, no other meter can provide the same quality, reliability, and feature set. New, for 2012, Hardline has updated the Tachometer function for reading your RPM. Knowing your RPM readings are important for passing sound checks and setting idle speed. The Hardline Hour / Tach meter has three adjustable inputs for dual or single spark ignition systems. Input is easily set with a touch of a button.
Also new for 2012, every hour meter from Hardline Products now includes a Log book for quick referencing of your written service notes. Write down oil changes, valve service, chassis lubrication, clutch service and suspension setting notes in one convenient book.
- This Hour Meter Works on all gasoline engines including newer fuel-injected bikes.
- It has Adjustable RPM input for dual or single spark ignition systems.
- Real Time reading of Tach up to 20,000 RPM.
- Records maximum RPM which is resettable.
- Easy Installation - peel and stick two sided tape included, no wiring necessary, or attach with enclosed hardware.
- No Battery or ground wire required.
- 100% epoxy encapsulated case water resistant.
- Records and Displays to 9,999.99 hours.
- Hour glass symbol appears and flashes on / off to indicate counting time.
- Automatic roll-over.
- Resolution 0.1 hour.
- Warranty one year with proof of purchase.
- Log book.
- Note: Total hours accumulated is not re-settable and cannot be erased.
Hour Meter displays can be read at all times (whether power is applied or not)! There is no clicking like mechanical meters. Installation is easy with simple patented one wire wrap.
Solid state electronics, modern LCD, superb environmental durability and enhanced functionality offer today's leading O.E.M.'s the best of all possibilities without sacrifice to performance, operation or budget.
Works just as described, nothing i can really complain about at this time!
Simple and counts the hours, just what I wanted.
Put this on my 2013 CRF450, makes keeping track of hours easy and the tach is handy for setting idle.
Gotta have this....makes keeping track of bike hours effortless! Great for maintenance schedules.
I have one of these Hardline tach/hour meters on all my dirt bikes. The tach is great for carb tuning and an hour meter is really helpful to keep up on maintenance. Never had a problem w/ any of them.
If you want to keep your thumper running, you have to keep up on maintenance. This item works as described, water proof, small enough to stay out of harms way, and installation is a snap.
I bought the mounting bracket to go along with the hour meter. Both are quality products with no defects, no problems so far.
It functions as an hour meter, keeping track in 10ths of an hour, and also works as a simple tachometer.
I believe the maximum RPM cuts out in the 9000 range.
Stop guessing when to change the oil, check the valve clearance, grease the bearings, etc,,,
It was great and did its job! It tells my rpms and always has my hours. I made the mistake and had to rip it up and replace it and came back to the truck to find it hanging. But other than that it was great!
I installed this on my rider mower. It was very easy to install and it works great. So far it has held up great considering I store the mower outside and while in use the hour meter is subjected to more vibration that it might normally be with some other use. by far the best price of all the other places I shopped. I would recommend this product.
Simple to install. Nice way to keep track of actual run time of your engine instead of guessing. I used an automotive double sided tape. The stuff that came with it didn't stick good enough.
Good product, when in the RPM mode there is a slight lag but overall it's well worth the money spent on it - installed mine on son's modified race quad '06 Polaris Predator 90 - on the flat steel surface of the left side upper motor mount, slightly tucked out of the way below the fuel tank. Works great for letting us know when to change out the gearbox oil, and check other normal wear and tear parts when racing. will install another one on my Banshee. Instalation took all of 5min and has been in place through the last 17 races, held up to mud, heat & pressure washing.....
Find a good place to mount it can be tricky but that's not the product's fault. It does very well in sand, dirt, water and then some. It's mounted on my handlebars and has been very helpful.
Does exactly what it say, very easy to install. I did buy the mounting bracket.
There have been no questions asked about the Hardline Tach / Hour Meter.