ASV F3 Clutch Lever & Perch

ASV F3 Clutch Lever & Perch
ASV F3 Clutch Lever & Perch

Unfortunately, we no longer carry this item. It may be discontinued or have just sold out.

Please contact Customer Service (1-866-667-6288) or search for another product if you continue to see this message.

Find other: ASV Clutch Levers

  • Description
  • Write a Review
  • 22 Questions
Item #

The ASV F3 Clutch Lever & Perch includes ASV's unbreakable, adjustable, forged 6061 aluminum F3 lever and a matching forged split design perch. It is an excellent upgrade from your stock clutch and comes with a three-year warranty.

  • Includes F3 Clutch Lever and Forged Split Design Perch.
  • Unbreakable design.
  • Adjustable reach with four inches of range.
  • Micro-adjustable reach with 180 increments.
  • Material: 6061 aluminum alloy.
  • Process: Forged.
  • Steel, sealed bearings on pivot.
  • Chrome silicon high-tension spring.
  • Stainless steel fasteners.
  • Completely rebuildable.
  • Laser-engraved ASV logo on front and back of lever blade.
  • Three-year warranty.
  • Notes: Fits all cable operated clutches; does not fit bikes that use hydraulic clutches. Requires removal of parking brake. May not work on quads with electric start.

Read More
Write a Review

Read More
22 Questions
Answered:   22
Not Yet:   0
Location: Manitoba, Canada
Q: Im looking to purchase this item for my 2008 yamaha 350 raptor and i am wondering is this lever an adjustable to fit people with smaller hands?
1 year 8 months ago
Because i have a stock lever and i can reach it but it would be a lot easier for me if it is a bit smaller.
Expert MotoSport Staff
1 year 8 months ago
A: Yes, this lever has an adjustable reach lever to fit different size hands.
Q: Does this ASV model have an ASV dust boot that can mount on it, similar to the Pro ASV model? I know it doesnt come with one.?
1 year 9 months ago
Just want to see if its an available option.
Top 1 Contributor
1 year 7 months ago
A: ASV does NOT have a specific dust boot for their F3 Clutch Lever & Perch. many times you can reuse the stock dust boot from the OEM setup.
Location: Atascadero, CA, USA
Q: Will F3 fit on yfz 450r?
1 year 9 months ago
will this work on a yfz 450r? the parking brake and clutch perch are all one unit that clamps to handlebars, will the parking brake clamp to machine specific F3 levers and perches? also the F3 brake lever seems like it might mount up correctly but the oem brake lever is also connected to the tailight. it triggers a switch that turns my tailight on from the brake perch. will that whole mechanism work together well?
Expert MotoSport Staff Top 1 Contributor
1 year 9 months ago
A: No, you will need to keep your stock (OEM) perch to retain the neutral switch and keep the parking brake in tact and operational. The front brake lever will directly replace your stock lever so you will still have the brake light. You can find the clutch lever here:
Q: Sensor?
2 years 3 months ago
does this model clutch lever have the hole for my sensor on it thanks
MotoSport Staff Expert
2 years 3 months ago Location: Portland, OR, USA
A: This is ASV's answer to your question listed in the FAQ section of

All late model quads with electric start have a safety switch in the stock perch commonly called a "neutral kill switch" this makes it so that you have to pull the clutch lever in before the electric starter will work. This is a safety precaution to keep your bike from being inadvertantly started while in gear and casing the bike to move forward while the starter is turning over the engine. In order to run this lever/perch set up you will have to disconnect the wires and coil them up and zip tie them under your shroud. In some cases you may need to cut the wire and tie them together to complete the circuit, but we recommend just disconnecting first and trying the starter (MAKE SURE BIKE IS NOT IN GEAR) to make sure the starter works when not plugged in. Please be aware that by disconnecting your neutral kill switch your bike will now start anytime with the clutch in or out, bike in gear or in neutral.
Q: Will this product fit the ssr 125?
2 years 5 months ago
MotoSport Staff Expert
2 years 5 months ago Location: Portland, OR, USA
A: ASV does not show any application for SSR pit bikes ( I would recommend getting in contact with ASV directly to see if they knew which lever set up would work best on your SSR 125.
Q: Does this allow for electric start sensors?
2 years 8 months ago
I have a ttr230, with electric start, will it trigger the sensor? If not will my sensor cables fit my secondary kill switch, making it trigger the sensor?
MotoSport Staff
2 years 8 months ago Location: Portland, OR, USA
A: This does not allow for the clutch safety switch. You would be able to wire it to a secondary "kill type" button but there isn't a switch produced specifically for this application. You would need to wire it in and it would be a custom fitment.
Q: Will this fit?
Over 6 years ago
will this lever fit on the stock perch of an 09 yz250f?
MotoSport Staff
Over 6 years ago Location: P+RTLAND
A: Yes it will fit.

As stated in the description: "The F3 bolts directly into your motorcycle's stock clutch perch."
2 years 11 months ago Location: Zerkel, MN 56621, USA
A: Yes it will.
Q: I broke and bent my clutch lever on my yz250 05 Do I need to buy the perch ?? The oem perch will do the same things??
Over 6 years ago
Over 6 years ago
A: if your perch is bent i would go will the pro clutch from ASV it comes with everything you need.
Expert MotoSport Staff
Over 6 years ago Location: Portland
A: If you only broke the lever you can get away with only purchasing a new lever, but if there is any damage to the perch I recommend replacing that as well.
Location: Trinidad, Co
Q: Alternative clutch levers for the F3 perch?
Over 6 years ago
Are there any other clutch levers that will fit the F3 perch?
Expert MotoSport Staff
Over 6 years ago Location: Portland, OR
A: The ASV Perches are only designed to fit the ASV Levers.
2 years 10 months ago
A: no
Q: How do I get an ASV F3 clutch with a perch?
Over 6 years ago
I didn't see any ASV F3 products that came with a perch. The ASV website shows they have them. Thanks
MotoSport Staff Expert
Over 6 years ago Location: Portland, OR
A: Depending on the type of bike/atv this is being installed on, we offer both F3 levers with perches. take a look a this link:
2 years 10 months ago Location: Corvallis, OR, USA
A: I just bought this clutch lever set and it came with the perch.
1-10 of 22

Read More

Find More